Coloured and colour-matched sealant in Selkirk, Scottish Borders
Work needed on a colour-matched joint in Selkirk? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Joints that need to match a new RAL frame colour
- Weathered sealant that no longer matches
- White or grey sealant that clashes with the finish
Coloured sealant across Selkirk
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Do you need coloured sealant in Selkirk?
Joints repaired piecemeal often end up in several shades. Mixed repairs over time leave a run of mismatched joints. Resealing a whole run in one agreed colour tidies it up.
Common reasons buildings call us in:
- A bead that fights the cladding or frame colour
- Untidy coloured beads with ragged edges
- Coloured joints that have cracked with movement
- Hotel refurbishments with a set colour scheme
Offices and shops close to stations such as Galashiels station (5 miles north of Selkirk) tend to be busy all day, so sealant work is planned around opening hours.
What your quote should include
- Their approach to joint depth and backing
- Will CSCS-carded applicators be on site?
- What level of public liability insurance do they hold?
- Which product they’ll use, and why it suits the joint
Coloured sealant in Selkirk
In retail, hospitality and office fit-outs, joints are seen close up every day. A grey bead on a black shopfront or a white line against oak looks like a defect, however well it was installed. We pick a colour from the product’s range that sits with the finish. The enquiries we see most involve failed coloured sealant that has split or peeled and sealant that no longer suits recoated frames, across natural stone and brick, office fit-out finishes and powder-coated and anodised frames. Most enquiries from Selkirk start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a job around Selkirk, the Scottish weather is part of the planning: outside joints need dry, frost-clear surfaces, so we agree a window with some give in it. Internal joints can be done whatever the day brings.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Selkirk (TD7)
- Region
- Scottish Borders
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Selkirk
Can the sealant on our Selkirk premises match the finishes?
Yes, we can normally get close to most finishes from the product’s colour range. Available colours for the product are confirmed with the quote.
Do hotels near Selkirk have to close for sealant work?
Rarely, if ever. We take a few rooms out at a time. The plan is built around your bookings.
Which sealant will you use?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
How do I request a quote?
The quote form is the simplest route, though you can also speak to us on 01277 525 020 or email the details over. Include photos or drawings if you have them.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
Shops, offices and hotels in and around Selkirk
The area within 2 miles of Selkirk holds a number of hotels. In hotels, sealant shows everywhere, from bathroom joints to reception counters, so colour and a clean finish matter, with rooms done in turn while the rest stay let. Being in the east of Scotland, Selkirk gets less rain than the west coast. Cold, frosty mornings and condensation on steel and glass can still delay outside work. We plan external frontages and frames around that
A hotel such as Fleece Hotel, under half a mile to the south-west of Selkirk, shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Selkirk is about 5 miles south of Galashiels, in the Scottish Borders. Across the TD7 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Selkirk is one of 91 places we cover in the Scottish Borders for colour-matched joints. We also cover Edinburgh, around 31 miles from Selkirk.
We cover the TD7 postcode districts. We cover commercial and managed buildings on High Street, Market Place and Station Road. Being close to the A7 and A707, Selkirk is easy to get to with materials and equipment. Close to Selkirk, our area also takes in Boleside (3 miles north-east), Midlem (4 miles east), Broadmeadows (4 miles west), Ashkirk (4 miles south) and Yarrowford (4 miles west). Bigger towns within reach include Galashiels (5 miles north), Hawick (9 miles south), Peebles (15 miles north-west), Jedburgh (12 miles south-east), Wilton (9 miles south) and Innerleithen (10 miles north-west). As one of the bigger centres in the Scottish Borders, Selkirk has a broad mix of commercial, public and industrial buildings.
Around Selkirk
Locally, jobs take us to sites close to Town Arms Inn and the streets around them. Selkirk’s nearest station is Galashiels station, about 5 miles north of the centre. A little further out are Borders General Hospital (5 miles north-east) and Peel Hill (under half a mile south). Open spaces near Selkirk include Hare and Dunhog Mosses and Haining Loch.
Quoting for work in Selkirk
Quotes vary with the job. Expect it to depend on:
- The site’s rules and procedures
- Travel to remote or island sites
- How much existing material needs removing
- How accessible the joints are
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
Before you send an enquiry
For an accurate fixed quote, we need a clear picture of the site. Send us:
- Specification clauses that apply
- Access details, including height
- Photos of the joints, close up and from further back
- What the building is and how it’s used
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
How a job runs
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before the next one starts. For work around Selkirk, we aim for one trip, so photos, sizes and a full list matter. External joints need a dry spell as well.
- The sealant type is chosen for the joint first, then the colour.
- Colour references, samples or photographs of the finish are checked against the product’s range.
- A short trial length can be approved before the full run on visible work.
- We take out the existing bead, clean the joints and fit backing.
- The coloured sealant is applied and tooled with clean, masked edges.
What we need from you
- Send your site hours and access windows
- Tell us what induction or permit system the site runs
- Point out any areas we must not close
Getting a fixed quote
For a fixed quote, speak to us on 01277 525 020 or email the details over, telling us the site location and the nature of the job. You can also send details through our quote form.
Related advice
For managing agents and facilities managers
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Selkirk can form part of a wider programme.
For main contractors, we work as the sealant subcontractor. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Why it’s worth doing now in Selkirk
A brand roll-out or multi-site fit-out benefits from a consistent sealant colour. Fixing the colour reference at the start keeps every site the same from one fit-out to the next. For buildings near Selkirk, dealing with all the failing joints at once saves return trips. Send photos and we’ll quote for everything together.
Pricing colour-matched joints depends on quantities, condition and access, plus any specification you are working to. Ask us for a fixed quote.
Why clients in Selkirk choose us
- Failed material removed, not covered up
- Sealing commercial buildings since 2005
- 12 months’ guarantee on every job
- Colour agreed before work starts
Read how commercial sealant jobs are priced or our accreditations.
How the job changes by surface
Powder-coated and anodised frames
Window, door and shopfront frames in RAL colours often need a sealant to suit. The frame colour is checked against what the product is made in, and the nearest option is agreed.
Paintable sealants
Where no colour in the range is close, a paintable hybrid or PU sealant can sometimes be painted to match. That only works where the joint and specification allow it.