Firth mastic sealing
Mastic sealing in Firth, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Cracked, hardened mastic round windows on a block
- Damp patches beside frames
- Occupiers reporting cold air round windows
Mastic sealing for businesses in Firth
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Building owners, agents and FMs in Firth
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules.
About our mastic sealing in Firth
Treatment starts with a proper look: which joints have failed, why, and whether sealant is the right answer. Failed mastic is stripped, the faces taken back to sound material, primed where the manufacturer specifies and resealed and backing rod used wherever a joint is deep. Most enquiries involve window mastic that has split and shrunk and the same joint failures repeated across a portfolio, on shopfronts below residential blocks, balcony and threshold joints and window and door perimeters on blocks. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Firth it comes down to the same thing: the right product in a properly prepared joint.
Outside mastic in Scotland needs dry joints and the right temperature, so work around Firth is planned with the forecast. Programmes allow for the weather.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Firth (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
From enquiry to sign-off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes one or more days per building, depending on the joint lengths and the access, and we clear our waste as we work. Tell us who will meet us and how to get in at your building near Firth. We’ll confirm the plan with the fixed quote.
- A building-by-building inspection lists the failed joints.
- The quote is fixed and split as suits you.
- We agree the programme and dates with you.
- Old mastic is removed and the joint faces prepared.
- New sealant goes in with backing rod and primer where needed.
- Each building is checked and signed off with the 12-month guarantee.
Getting the site ready
- Tell staff and tenants when we’ll be in
- Flag any permit to work we’ll need
- Make sure the joints can be reached
Request a quote
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, call 01277 525 020 or email drawings and photos.
Read more
What the job involves on each surface
Communal areas
Low-level communal joints get damaged more than most and tend to fail first.
Estate-wide resealing programmes
Housing associations and agents often manage many similar blocks. We quote building by building and work through them in turn.
Mastic sealing in Firth: the local picture
Firth lies within about 2 miles of the sea. For owners and agents with buildings near the sea, exposed elevations are where frame mastic fails first, so it’s worth inspecting those sides more often. Being in the east of Scotland, Firth gets less rain than the west coast. Frost and condensation on winter mornings can still delay outside mastic.
Owners near Firth can renew frame and external mastic block by block on one programme.
Firth is in the Shetland Islands. Businesses, contractors and managing agents in Firth can call on us for mastic joints. Across the Shetland Islands, 63 places are covered, including Firth.
Commercial sites across ZE2 are covered. Among the streets we cover are Midlea, Leaside and Sandside. Close to Firth, our area also takes in Mossbank (1 mile north-east), Scatsta (4 miles west), Vidlin (6 miles south), Sullom (6 miles west) and Burravoe (6 miles north-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you call the office on 01277 525 020 or send details through our quote form.
Landmarks near Firth
Not far away are Loch of Bordigarth.
After the work
For the best life from the joints:
- Make it easy for occupiers to report draughts
- Plan resealing building by building rather than complaint by complaint
- Reduce knocks to communal area joints
- Start inspections with the most exposed faces
Keep records of when each building was resealed. That makes future programmes easier to plan and gives you a history.
Failed mastic often goes unnoticed until heavy rain finds it. Acting at the first signs keeps it a straightforward reseal and the complaints that come with it.
Why deal with it now?
Resealing ahead of leaks keeps it to a maintenance task. Once water has tracked in, the repair list grows and occupiers notice. Renewing every failing joint on one visit is the sensible approach for a place like Firth. Send photographs and we will quote for everything together.
Pricing mastic joints depends on how many there are, their condition and the access, plus any specification you are working to. Ask us for a fixed quote.
Why choose Mastic Doctor in Firth
- CHAS accredited
- Fully insured
- One number for every site we cover
- 12-month guarantee on workmanship
Take a look at how commercial sealant jobs are priced and our accreditations.
What else we do in Firth
Signs you need mastic sealing in Firth
The edges of the material itself sometimes break away for example where render or brick edges crumble. We will tell you if the joint edges need repairing before resealing.
Site and facilities staff are often the first to spot these:
- Failed external movement joints
- Old repairs sealed over failed mastic
- Leaks at window and door perimeters
- Damaged joints in communal entrances and corridors
Wherever your building is in or near Firth, we look at the whole elevation before quoting, so you know what needs doing now.
What to look for in a quote
- Who will actually carry out the work
- Whether primer will be used where the manufacturer specifies it
- The named product and why it was chosen
- What site paperwork they can supply
Firth: questions and answers
Will you price a mastic programme across our Firth portfolio?
Yes. Portfolio-wide programmes are a regular request. We can phase the programme to suit your budgets and notice periods.
Can being near the sea in Firth affect the sealant we need?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Do you work in Firth?
Yes. We cover Firth, and you can give us a call on 01277 525 020 or email the details over to get started.
Can people stay in the building while you reseal?
We plan around people living or working in the building. Dates and areas are agreed with you so residents or tenants can be told, and entrances stay in use.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
What paperwork can you provide?
We’re CHAS accredited, a Constructionline member and carry public liability insurance. For specific documents, tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.