Fernieside coloured sealant
Commercial sealant work in Fernieside for contractors, FMs and building owners: coloured and colour-matched sealant for visible joints, with a fixed quote first.
- Standard-colour sealant spoiling a high-end finish
- Hotel refurbishments with a set colour scheme
- Poorly tooled joints on visible finishes
Coloured sealant near Fernieside
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
For managing agents and facilities managers
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. One quote can cover more than one site, which keeps the paperwork simple.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
About our coloured sealant in Fernieside
Coloured sealant work ranges from a new shop fit to replacing failed joints on an existing building on sites across Edinburgh. When replacing old joints, the new colour usually has to match what’s already there, especially on a listed or high-profile elevation. We work on powder-coated and anodised frames, natural stone and brick and office fit-out finishes, and the usual reasons a site gets in touch are poorly tooled joints on visible finishes and previous reseals that don’t match the original. For commercial sealant work in Fernieside, you deal with one contact from quote to sign-off, whether it’s one building or several.
In Scotland’s cities, commercial premises are packed closely, from stone-fronted offices to shops on the ground floor of tenement blocks. Where a shop sits below tenement flats, work on the frontage or shared parts may involve the property factor.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Place
- Fernieside (EH17, EH16, EH22)
- Region
- Edinburgh
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Towns and villages near Fernieside
Other services in Fernieside
Surface by surface
Powder-coated and anodised frames
Window, door and shopfront frames in RAL colours often need a sealant to suit. The frame colour is checked against what the product is made in, and the nearest option is agreed.
Cladding panels
Multi-coloured cladding needs a joint colour that works across it. Sometimes a mid-tone suits better than matching one panel.
Should maintenance staff do it?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Diagnose, treat, sign off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes a day for a modest shop fit, and longer for a full building or several floors, and our waste is bagged and taken away as we go. Work on a big city site in Scotland usually involves inductions and permits. Tell us the rules and we will work to them.
- We start with photographs, drawings or a visit to see the finishes.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- We seal in the approved colour and tool it smooth.
What we need from you
- Arrange parking or a loading space
- Move anything stored against the joints
- Agree which areas must stay open
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or send details through our quote form.
Read more
Common questions from Fernieside clients
Will you take on work at estates like Craigmillar Shopping Centre, close to Fernieside?
Yes. Estates, retail parks and business parks around Fernieside, Craigmillar Shopping Centre among them, are all within reach. A few photographs and the unit address let us price the work.
Does a hotel in Fernieside need to shut while its sealant is renewed?
Rarely, if ever. We take a few rooms out at a time. We agree the order of rooms and the timings with you before we start.
Will you just go over the old sealant?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Can we specify the colour by RAL number?
Yes. RAL references are a common way to specify sealant colour. We check what that product is made in.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
What about RAMS and site documents?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Does the weather affect the work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
What we can’t put right
Before quoting, we check that sealant is the right answer. It won’t put right:
- Exact bespoke colour matches beyond the product’s range
- Overpainting a joint that needs a non-paintable product
- Colour variation across natural stone or brick that no single shade can match
If in doubt, call 01277 525 020 or email the details over and we will say what we think before you book.
Where we work in Fernieside
- Natural stone and brick
- Shop-fit joinery and counters
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
- Office fit-out finishes
- Cladding panels
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Plan full-run reseals on visible elevations
- Approve a sample bead on high-profile areas
- Ask contractors to check the colour before resealing
- Agree the sealant colour early and write it into the specification
Check visible joints during routine inspections. Watch for cracks, peeling or discolouration.
Share the colour reference with anyone working on the finishes. It stops mismatched repairs creeping in.
Coloured sealant in Fernieside: the local picture
The sea is no more than about 3 miles from Fernieside. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. A matched colour is only half the brief on an exposed frontage. There are several hotels within about 2 miles of Fernieside. A hotel refurbishment is full of joints that guests will see, and a matched colour keeps them discreet.
For a retailer at a site such as Craigmillar Shopping Centre, which lies north of Fernieside, the joints customers see are as much part of the fit-out as the shelving. Shops and cafés around stations like Shawfair station, 1.6 miles east of Fernieside, trade from early, so work is timed around them. Occupiers with premises at both Craigmillar Shopping Centre and Peffermill Industrial Estate could have the sealant at each handled under one quote.
Fernieside is about 3 miles north of Bonnyrigg, in Edinburgh. Commercial clients in Fernieside can call on us for colour-matched joints, as part of our coverage of Edinburgh. 174 places across Edinburgh fall within our area, including Fernieside.
We take on colour-matched joints across the EH17, EH16 and EH22 postcode area, for business premises of every kind. Buildings on Drum Avenue, Gilmerton Road and Craigour Avenue are within our area for colour-matched joints. Being close to the A772, Fernieside is straightforward for us to reach. If your building is just outside Fernieside, we cover Ferniehill (1 mile south), Moredun (1 mile north-west), Craigour (1 mile north-west), Gilmerton (1 mile south) and Little France (1 mile north-west). Further afield, our area takes in Edinburgh (4 miles north-west), Leith (5 miles north), Bonnington (4 miles north-west), Greenside (4 miles north-west), Broughton (4 miles north-west) and Bellevue (4 miles north-west).
Local landmarks in Fernieside
Locally, jobs take us to sites close to Drum Park and the streets around them. The closest station to Fernieside is Shawfair station, about 1.6 miles east. Other landmarks nearby include Natural History Collections (1.8 miles north-west) and Cameron Toll Shopping Centre (1.6 miles north-west). Not far away are Nether Hill and Duddingston Loch.