Facade Sealing contractors in Fernieside
Commercial sealant work in Fernieside for contractors, FMs and building owners: facade joint and window perimeter sealing on commercial buildings, with a fixed quote first.
- Leaks at window and door perimeters
- Perimeter joints where frames meet the structure
- Unsightly perimeter sealant on a visible elevation
Facade sealing across Fernieside
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Facade sealing in Fernieside, done properly
We are often asked to look at water coming in around frames. Failed perimeter sealant is a frequent cause, but not always. We’ll tell you if we think the leak is coming from somewhere sealant won’t fix. We work on window and door perimeters, shopfront frames and stone and brick facade joints, and the usual reasons a site gets in touch are air leaks through failed facade joints and facade joints cracked through the middle. Whoever orders the work in Fernieside, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Construction in Scotland’s cities is a mix of new build and work to existing stone buildings. Work comes under Scotland’s own building standards, and our job is to seal to the specification.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Fernieside (EH17, EH16, EH22)
- Wider area
- Edinburgh
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Honest limits
Being straight saves everyone time. New sealant won’t cure:
- Water getting in through cracked render or porous masonry
- Replacing glass or failed glazing units
- Movement beyond what any sealant can handle
If in doubt, call the office on 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
Joints and surfaces we work on
- Shopfront frames
- Cladding panel joints
- Perimeter joints where frames meet the structure
- Window and door perimeters
- Stone and brick facade joints
- Coping and flashing joints
Towns and villages near Fernieside
What else we do in Fernieside
How a job runs
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Give us the access times and building rules for your premises in Fernieside, and we will plan the work to suit, phased where areas need to stay in use.
- First we review photos, drawings or what we saw on a visit, and agree how each joint will be reached.
- The old bead is cut away completely, not overlaid.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Backing rod, or bond-breaker tape in shallow joints, limits the depth.
- A facade-grade sealant rated for the movement goes in, tooled to a concave profile.
- The completed runs are checked with you, then the 12-month guarantee applies.
What we need from you
- Agree which areas must stay open
- Arrange parking or a loading space
- Let us know about inductions and permits
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or email the details over.
Read more
Mastic packages on Fernieside sites
Fernieside is within about 3 miles of the coast. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, which puts weight on correct joint sizing, priming and a sealant suited to the exposure. A number of hotels sit less than 2 miles from Fernieside. Hotel schemes tend to have fixed reopening dates, so the mastic is programmed tightly with the other trades.
When a college such as Edinburgh College - Milton Road Campus (2.5 miles north-east of Fernieside) builds or refurbishes, the mastic package typically has to fit around students and staff. New wings at hospitals like Royal Hospital for Children and Young People, 0.7 miles to the north-west of Fernieside, bring long runs of window and panel joints to seal.
Fernieside is about 3 miles north of Bonnyrigg, in Edinburgh. Fernieside sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Edinburgh, 174 places are covered, Fernieside among them.
Commercial sites across EH17, EH16 and EH22 are covered. Among the streets we cover are Drum Avenue, Gilmerton Road and Craigour Avenue, and sites on any of them can send details for a fixed quote. Access to Fernieside is via the A772. If your building is just outside Fernieside, we cover Ferniehill (1 mile south), Moredun (1 mile north-west), Craigour (1 mile north-west), Gilmerton (1 mile south) and Little France (1 mile north-west). A short drive away, we cover Edinburgh (4 miles north-west), Leith (5 miles north), Bonnington (4 miles north-west), Greenside (4 miles north-west), Broughton (4 miles north-west) and Bellevue (4 miles north-west).
Around Fernieside
We work on buildings around Drum Park, among other places. For rail, the closest station is Shawfair station, roughly 1.6 miles east. A little further out are Natural History Collections (1.8 miles north-west) and Cameron Toll Shopping Centre (1.6 miles north-west). The countryside around Fernieside includes Nether Hill and Duddingston Loch.
What affects the price in Fernieside
These are the things that shape the price:
- Joint width, depth and condition
- Distance, for remote addresses
- Quantities, in metres or numbers
- The site’s rules and procedures
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
What to include in your enquiry
The more we know, the firmer the quote. When you get in touch, include:
- The site address and postcode
- Specification clauses that apply
- How the joints are reached, and at what height
- Any dates the work must fit around
To get a fixed quote, give us a call on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
What we are called out for in Fernieside
Product choice matters: acetoxy-cure silicone may mark stone or corrode certain metals, and an interior product won’t last outdoors. Neutral-cure, facade-grade products are what most external joints need.
If one of these sounds familiar, it’s time for a closer look:
- Perimeter joints where frames meet the structure
- Leaks at window and door perimeters
- Previous reseals run over old sealant
- Gaps between rainscreen or cladding panels
On a campus such as University of Edinburgh Bioquarter, 0.5 miles to the north of Fernieside, new teaching buildings and residences are typically built and refurbished around the academic year.
Comparing quotes
- Their plan for phasing and protecting the area
- The terms of the workmanship guarantee
- Will RAMS and insurance details be available?
- Do they follow the manufacturer’s priming guidance?
When to bring in a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
FAQs: Fernieside
Does the sea air around Fernieside change the choice of sealant?
It can. Coastal exposure works external joints harder than inland weather. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Would you work within a site like Royal Hospital for Children and Young People?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
What type of sealant goes on window perimeters?
The product follows the joint’s movement, the surfaces and the specification. Specifications often refer to BS EN 15651-1 for facade sealants or BS EN 15651-2 for glazing, and we work to what is specified.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Can staff carry on working while you’re here?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Why act early in Fernieside
Every shower drives water through a split perimeter bead. Behind the frame, that can mean damp plaster, stained ceilings, corroded fixings and damaged insulation. Resealing now costs less than repairing interiors later. In Fernieside, as across Scotland, rain finds any gap, and failed external joints let it into stone walls and around frames. Renewing them early protects the fabric.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
What you get with us
- Colours chosen to suit frames, cladding or finishes where possible
- 12 months’ guarantee on every job
- One contact handling all your sites
- Fixed quotes based on photos, drawings or a visit