Coloured and colour-matched sealant in Broughton, Edinburgh
Coloured sealant in Broughton, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Old colour-matched joints lifting at the edges
- Old sealant that has yellowed, darkened or faded
- Sealant that no longer suits recoated frames
Coloured sealant near Broughton
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Why act early in Broughton
A brand roll-out or multi-site fit-out benefits from a consistent sealant colour. Fixing the colour reference at the start keeps every site the same. In a tenement or shared city building, water from a failed joint can reach other owners’ property, which makes early repair simpler for everyone. Fixing it promptly keeps repairs small.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why us?
- One contact handling all your sites
- Standard and matched colours in many product ranges
- Fully insured, including public liability cover
- Colours confirmed for the specified product
How we handle coloured sealant in Broughton
In retail, hospitality and office fit-outs, joints are seen close up every day. A mismatched bead can make good joinery look unfinished, even when the seal is sound. We pick a colour from the product’s range that sits with the finish. If you have poorly tooled joints on visible finishes and hotel refurbishments with a set colour scheme, we can put it right, on shop-fit joinery and counters, hotel bathrooms and public areas and natural stone and brick alike. For commercial sealant work in Broughton, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
City-centre premises in Scotland often come with tight access, shared closes and loading restrictions. Give us your access times and any building rules and we will fit the work around them, phased so offices and shops keep trading.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Broughton (EH7, EH1, EH3)
- Region
- Edinburgh
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
More services for Broughton
What we’re called out for in Broughton
A change of finish can leave existing sealant mismatched. Refurbishments and rebrands often bring a new colour scheme that the sealant has to follow.
If one of these sounds familiar, it’s time for a closer look:
- Patch repairs in several different colours
- Fit-outs with a sealant colour in the specification
- Stained or mouldy coloured joints in washrooms
- Weathered sealant that no longer matches
In a retail centre such as St. James Centre, under half a mile south of Broughton, new tenants mean new shop fits, and the sealant at counters, frontages and floor edges is part of the finish.
Before you book anyone
- What site paperwork they can supply
- How the joint faces will be prepared and primed
- How joint depth will be controlled
- The terms of the workmanship guarantee
When it isn’t the sealant
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Paint over sealant on joints that move too much
- Preventing all fading from sunlight and weathering
- Restoring stained stone or masonry next to old sealant
Not sure which it is? You can ring 01277 525 020 or use the quote form and we will tell you honestly.
Joints and surfaces we work on
- Natural stone and brick
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Cladding panels
- Shop-fit joinery and counters
- Office fit-out finishes
What the job involves on each surface
Office fit-outs
In offices, sealant appears at partitions, tea points, washrooms and reception desks. Colour-matched joints keep the finish consistent across floors at handover.
Shop-fit and joinery finishes
In shops, joints are at eye level and inspected by clients. A sharp, even bead is as important as the colour.
Maintenance after handover
Once the work is signed off, these steps help:
- Look at the cured colour before the full run
- Keep the same sealant colour across a brand
- Clean coloured joints with mild products
- Ask contractors to check the colour before resealing
Don’t let anyone patch a coloured joint with whatever sealant is to hand. A mismatched repair stands out, so it is better to reseal the section properly.
Make sure every contractor knows which sealant and colour are on the building file. It stops mismatched repairs creeping in.
How a job runs
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work usually takes a day for a modest shop fit, and longer for a full building or several floors, and our waste is bagged and taken away as we go. In a Scottish city, kerbside space and loading need planning, especially near the centre. Shared closes, stairs and the property factor may need to be part of the plan.
- We confirm the product the joint needs before talking about colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- A short trial length can be approved before the full run on visible work.
- We take out the existing bead, clean the joints and fit backing.
- The coloured sealant is applied and tooled with clean, masked edges.
Preparing the site
- Arrange parking or a loading space
- Clear stock, furniture or equipment away from the joints
- Tell us what induction or permit system the site runs
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or send photos by email.
Related advice
FAQs: Broughton
Will our hotel in Broughton need to close for the work?
Rarely, if ever. We take a few rooms out at a time. Tell us your quiet periods and access windows and we’ll plan around them.
Do you cover business parks and estates near Broughton, such as Beaverbank Business Park?
Yes. We cover Broughton and the area around it, including industrial estates, business parks and retail parks such as Beaverbank Business Park. A few photos and the unit address let us price the work.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Can weather delay the job?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Can you guarantee a perfect colour match?
No. An exact bespoke match isn’t something we can promise. We will show you the closest colours in the specified product’s range for your approval.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or send details through our quote form. Photos, drawings or a joint schedule help us quote quickly.
What Broughton’s businesses ask us to seal
Broughton sits close to the coast, within about 1 mile. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. Sea-facing elevations are usually where failed joints show first. Broughton is on Scotland’s drier eastern side. Winter frost and damp frames still stop outside sealing on some days. We plan external frontages and frames around that
If you have premises on more than one site, say at Beaverbank Business Park and Stewartfield Industrial Estate, one contractor and one quote can cover both. For tenants and agents on sites such as Beaverbank Business Park, 0.5 miles to the north-west of Broughton, office fit-outs, reception joints and window perimeters are the usual sealant work.
Broughton is about 1 mile north-east of Edinburgh, in Edinburgh. Broughton sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 174 places in Edinburgh.
Work on colour-matched joints is covered throughout EH7, EH1 and EH3. For a building on York Lane, Meuse Lane and Canon Lane or nearby, we can quote for colour-matched joints. Main routes into Broughton include the A900. Sites close to Broughton are covered too, including Gayfield (1 mile north-east), Greenside (1 mile south-east), Bellevue (1 mile north-west), New Town (1 mile west) and Canonmills (1 mile north-west). Bigger towns within reach include Queensferry (8 miles west), South Portobello (3 miles east), Southhouse (4 miles south), Gilmerton (4 miles south-east), Muirhouse (3 miles west) and Slateford (3 miles south-west). As one of the bigger centres in Edinburgh, Broughton has a broad mix of commercial, public and industrial buildings.
Around Broughton
Locally, jobs take us to sites close to King George V Park, McDonald Road Library and Public House. Broughton has its own railway station: Edinburgh Waverley station. A little further out are Victorian Pharmacy Museum (under half a mile south-west) and St. James Centre (less than half a mile south). The countryside around Broughton includes Salisbury Crags and The New Leaf Co-op.