Coloured and colour-matched sealant in Gilmerton, Edinburgh
Coloured sealant in Gilmerton, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Poorly tooled joints on visible finishes
- Patch repairs in several different colours
- Marked sealant in hotel bathrooms
Coloured sealant for businesses in Gilmerton
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Coloured sealant for commercial buildings in Gilmerton
We take on colour-matched work across new fit-outs, refurbishments and resealing of existing joints. When replacing old joints, the new colour normally has to match what’s already there, particularly where the building’s look matters. We work on cladding panels, shop-fit joinery and counters and hotel bathrooms and public areas, and the failures we are asked to look at most are poorly tooled joints on visible finishes and a run of joints in mismatched shades. Facilities teams, main contractors and managing agents in Gilmerton tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Working in a Scottish city means planning around loading rules, shared entrances and busy pavements. Give us your access times and any building rules and we will fit the work around them.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Gilmerton (EH17, EH16)
- Region
- Edinburgh
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Keeping the joints sound
Cleaning and maintenance staff play a part too. Share these points with them:
- Insist on the agreed colour for any repair
- Keep the same sealant colour across a brand
- Put the colour reference on the finishes schedule
- Reseal whole runs rather than patching single joints
Colours can soften with light and weathering. That is normal for exposed sealant.
Use one product and colour reference across a building or brand. It keeps repairs and new sites consistent and easier to manage.
What happens if it’s left?
Matching new joints to the existing ones is easier when the whole run is done together. Piecemeal repairs over several years tend to drift in colour, so a planned reseal often looks better value. Getting access arranged for a building in Gilmerton takes time, so deal with all failing joints while access is up.
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
What you get with us
- Colour agreed before work starts
- CHAS accredited contractor
- Constructionline member for supplier checks
- A fixed quote before work starts
Read our cost guide and how we’re accredited.
Different surfaces, different methods
Office fit-outs
Office joinery and frames usually follow a colour scheme. We match from the product’s range.
Shop-fit and joinery finishes
In shops, joints are at eye level and inspected by customers. A sharp, even bead is as important as the colour.
Nearby places to Gilmerton
Other services in Gilmerton
Your questions answered
Will our hotel in Gilmerton need to close for the work?
Rarely. Rooms or floors are done in turn, so the rest of the hotel keeps trading. Housekeeping and our team agree each day’s rooms.
Do you cover business parks and estates near Gilmerton, such as Eldin Industrial Estate?
Yes. We cover Gilmerton and the area around it, including industrial estates, business parks and retail parks such as Eldin Industrial Estate. To start, just phone 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Do you need to see the site first?
That depends on the size and complexity of the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
Can you guarantee a perfect colour match?
No, not in every case. We choose the nearest standard colour.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Will sunlight affect the sealant colour?
Some change is normal outdoors. UV and grime can soften or alter the colour, and resealing brings the look back.
Does a coloured sealant perform differently from a standard one?
The product type decides performance, not the colour. We choose the right product for the joint first and then pick from its colour range with the same preparation and backing.
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Diagnose, treat, sign off
Before we leave any area, we remove the tape, clean down and inspect every joint. Where the sealant needs time to cure before use, we tell you and sign the area. Give us the access times and building rules for your premises in Gilmerton, and we will plan the work to suit, phased where areas need to stay in use.
- We confirm the joint type and the product it needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- Masking comes off and the work is checked with you.
Before we start on site
- Share your working hours and any access restrictions
- Confirm the product named in the specification
- For older buildings, check the asbestos register before work
Get a fixed quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings that you can work with. For a chat about it beforehand, ring 01277 525 020 or send details through our quote form.
Related advice
Working on commercial sites near Gilmerton
At least three named trading, business or retail sites lie within about 3 miles of Gilmerton. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal, often in a colour the occupier specifies. The east of Scotland, where Gilmerton is, gets less rain than the west. Cold, frosty mornings and condensation on steel and glass can still delay outside work. We plan external frontages and frames around that
For a shop at a centre such as Craigmillar Shopping Centre (1.9 miles north of Gilmerton), tidy joints at counters and displays matter as much as the fixtures. On estates like Eldin Industrial Estate, which lies south-west of Gilmerton, the office and welfare end of each unit has its own sealant to maintain. Occupiers with premises at both Eldin Industrial Estate and Edgefield Industrial Estate could have the sealant at each handled under one quote.
Gilmerton is about 4 miles south-east of Edinburgh, in Edinburgh. Anywhere in EH17, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 174 places in Edinburgh, from busy centres to rural villages.
Postcode districts covered here: EH17 and EH16. We cover commercial and managed buildings on Drum Avenue, Brosie Road and Hyvot Avenue and the roads nearby. You’ll find Gilmerton on or near the A772, so getting applicators and materials to site is simple. Sites close to Gilmerton are covered too, including Ferniehill (1 mile north), Fernieside (1 mile north), Moredun (1 mile north), Craigour (1 mile north) and Ellen's Glen (1 mile north-west). Bigger towns within reach include Edinburgh (4 miles north-west), Leith (5 miles north), Bonnington (5 miles north), Greenside (4 miles north-west), Broughton (4 miles north-west) and Bellevue (5 miles north-west).
Local landmarks in Gilmerton
Around Gilmerton, our work takes us to commercial buildings near Drum Park, among other places. For rail, the closest station is Shawfair station, about 1.8 miles north-east of the centre. A little further out are Cameron Toll Shopping Centre (2 miles north-west) and Craigmillar Castle (1.5 miles north). For a walk, there’s The New Leaf Co-op and Duddingston Loch.
Owners, agents and contractors
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.