Boreland coloured sealant
Coloured and colour-matched sealant for visible joints in Boreland and across Perth and Kinross. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Hotel refurbishments with a set colour scheme
- Joints that need to match a new RAL frame colour
- Smeared sealant on stone or joinery
Coloured sealant across Boreland
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Coloured sealant in Boreland, done properly
A colour-matched bead still has to work as a seal. Each joint is cleaned, backed to depth and tooled firmly onto both faces, exactly as for a standard colour. Clean masking and steady tooling give the sharp lines colour work needs. Site teams most often ask us about discoloured joints on a visible elevation and patch repairs in several different colours, on powder-coated and anodised frames, hotel bathrooms and public areas and shop-fit joinery and counters. For commercial sealant work in Boreland, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Around smaller places such as Boreland, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Each has kitchens, washrooms and frames that depend on sound joints.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Location
- Boreland (PH15)
- Region
- Perth and Kinross
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
General trades versus a specialist
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Keeping the joints sound
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Plan full-run reseals on visible elevations
- Keep harsh solvents away from visible joints
- Check a trial length in real light
- Keep the colour details for future repairs
If other trades disturb a coloured joint, ask them to tell you rather than patch it. A mismatched repair stands out, so it is better to reseal the section properly.
Put the sealant colour into the specification or finishes schedule. Late decisions lead to substitutes and mismatches.
What the job involves on each surface
Hotel interiors
Hotels use colour-matched sealant in bathrooms, bedrooms and public areas. Wet-area sealants come in colours other than white too.
Paintable sealants
Some joints are better sealed with a paintable product and decorated. That only works where the joint and specification allow it, as paint can crack on a moving joint.
Sealant on show in Boreland’s commercial buildings
The west of Scotland, where Boreland is, gets more rain than the east. Outside sealing needs dry spells and a programme that can move a little. Shopfronts and frames facing the prevailing weather are where failures show first
Whatever the building in Boreland, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material. Where a joint is on show in Boreland, we’ll check which shades the product offers before work starts.
Boreland is about 17 miles north-west of Crieff, in Perth and Kinross. Across the PH15 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Across Perth and Kinross, 114 places are covered, including Boreland. There’s a separate page for Dundee, about 43 miles away.
Work on colour-matched joints is covered throughout PH15, for business premises of every kind. Buildings on Tay Sealladh and Tigh na Loan are within our area for colour-matched joints. We also cover Fearnan (1 mile east), Acharn (3 miles east), Kenmore (4 miles east), Aberfeldy (9 miles east) and Kinloch Rannoch (9 miles north-west).
Around Boreland
Well-known places in the area include Scottish Crannog Centre (3.3 miles east) and Carnbane Castle (3.2 miles north-west). Not far away are Drummond Hill and Lochan nan Uan.
On site: what to expect
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself usually takes a day for a modest shop fit, and longer for a full building or several floors, and our waste is bagged and taken away as we go. Travel to smaller Scottish places like Boreland is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- We start with photographs, drawings or a visit to see the finishes.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- We prepare each joint, prime where needed and fit backing.
- The agreed colour is installed and tooled neatly.
Preparing the site
- Share your working hours and any access restrictions
- Agree which areas must stay open
- Point out parking and an unloading spot
Get a fixed quote
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, call the office on 01277 525 020 or send details through our quote form.
Related advice
Also in Boreland
How the quote is worked out
Each job is priced on its own details. The main factors are:
- Specialist products, such as fire-rated or hygienic sealants
- Site requirements such as inductions and permits
- Whether old sealant has to be cut out first
- Access and working height
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Before you send an enquiry
To price the job accurately, we need to understand the site. Send us:
- Whether an asbestos survey exists
- Drawings or a marked-up plan, if available
- How the joints are reached, and at what height
- Specification clauses that apply
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Boreland: questions and answers
Can you match sealant colours for premises in Boreland?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Send colour references or photos and we’ll confirm what’s available for the product.
Which documents can you supply for work in Boreland?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Which sealant will you use?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
How long does a typical visit take?
That varies with the scale of the job, but the work normally takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first. For bigger or phased jobs, we will set out a timescale with the quote.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators.
Why deal with it now?
People notice sealant lines more than you might expect, particularly on high-end finishes. Resealing in a suitable colour is a modest cost against the finishes it sits beside. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Boreland, a repair visit takes planning, so it’s better to act early.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
What you get with us
- Work carried out by CSCS-carded applicators
- Colour options checked against the specified product
- Joints cleaned back to sound surfaces
- CHAS accredited contractor
Read what affects the cost or our accreditations and insurance.