The Mastic Doctor team standing beside their branded vans outside an office building
Perth and Kinross · Scotland

Coloured Sealant in Fearnan

Sealant work in Fearnan for main contractors, managing agents and facilities managers: coloured and colour-matched sealant for visible joints, with a fixed quote first.

  • A bead that fights the cladding or frame colour
  • Old colour-matched joints lifting at the edges
  • Colour changes after a rebrand or refit
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
Covering the South East & Scotland
CHAS accredited
£5m public liability

Coloured sealant near Fearnan

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Coloured sealant in Fearnan, done properly

Stone, brick and cladding each bring their own colour challenge: sandstone, granite, brick and stained timber rarely have one flat colour. We choose a colour that reads well across the surface rather than chasing one spot. We work on natural stone and brick, powder-coated and anodised frames and hotel bathrooms and public areas, and the usual reasons a site gets in touch are stained or mouldy coloured joints in washrooms and white or grey sealant that clashes with the finish. For commercial sealant work in Fearnan, you deal with one contact from quote to sign-off, whether it’s one building or several.

Scottish weather decides a lot about outside work in a place like Fearnan: sealant needs a dry joint and the right temperature, so external work has a weather window built in. Internal joints can be done whatever the day brings.

Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.

The Mastic Doctor team standing beside their branded vans outside an office building
Where
Fearnan (PH15)
Region
Perth and Kinross
Guarantee
12 months on our workmanship
Quotes
Fixed quote, scope in writing
Phone
01277 525 020
Updated
3 November 2026

General trades versus a specialist

For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.

What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.

Why deal with it now?

Standard white or grey sealant is cheaper to stock, but it doesn’t always suit the finish. Where joints are on show, choosing a better colour is usually worth it. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Fearnan before they leak.

Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.

Why us?

  • Over 20 years of commercial sealing
  • Constructionline member for supplier checks
  • One contact handling all your sites
  • RAL and finish matching where the product range allows

Take a look at what affects the cost or our accreditations.

How the job changes by surface

Paintable sealants

Paintable sealants suit internal, low-movement joints best. If the joint needs a product that can’t be painted, we say so.

Shop-fit and joinery finishes

Shop fits bring laminate, timber, metal and stone together, each with its own colour. Each joint gets a colour that suits the materials it sits between from the product’s range.

Our process

We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Jobs near Fearnan are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.

  1. We confirm the product the joint needs before talking about colour.
  2. Colour references, samples or photographs of the finish are checked against the product’s range.
  3. Where colour is critical, a sample bead can be agreed in a discreet spot.
  4. We remove the existing bead, clean the faces and set the depth.
  5. We apply the agreed colour and tool it neatly, with masking where the finish needs it.

Preparing the site

  • Point out parking and an unloading spot
  • Agree which areas must stay open
  • Send asbestos survey details if the building is pre-2000

Get a fixed quote

A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.

Get a price

Advice

Commercial premises in Fearnan

Being in the west of Scotland, Fearnan gets more rain than eastern areas. We plan external joints for dry spells and keep internal work in reserve. Shopfronts and frames facing the prevailing weather are where failures show first

A lasting commercial joint around Fearnan begins with the old bead fully out and the faces clean and dry.

Fearnan is about 27 miles north-west of Perth, in Perth and Kinross. We send applicators to Fearnan for colour-matched joints. Our Perth and Kinross coverage takes in 114 places, from busy centres to rural villages. Sites around Dundee have their own page, about 43 miles away.

Work on colour-matched joints is covered throughout PH15, whatever the building. Streets here include Dalcharian, Tay Sealladh and Tigh na Loan, and sites on any of them can send details for a fixed quote. Close to Fearnan, our area also takes in Boreland (1 mile west), Acharn (2 miles east), Kenmore (3 miles east), Aberfeldy (9 miles east) and Kinloch Rannoch (9 miles north-west).

What’s near Fearnan

Nearby you’ll also find Carnbane Castle (3.4 miles north-west) and Scottish Crannog Centre (3 miles east). Green spaces nearby include Lochan nan Uan and Drummond Hill.

Map of Fearnan © OpenStreetMap contributors

Do you need coloured sealant in Fearnan?

Sometimes the wrong colour went in at the start, or a substitute product was used. It seals fine but catches the eye, so someone asks for it to be changed.

Any of the following is a good reason to get the joints checked over:

  • Weathered sealant that no longer matches
  • Patch repairs in several different colours
  • Hotel refurbishments with a set colour scheme
  • Joints that need to match a new RAL frame colour

Colour matters on frontages and fit-outs, so the quote confirms which colours the chosen product comes in.

Questions to ask before you book

  • Are they CHAS accredited or on Constructionline?
  • How long is the guarantee, and what does it include?
  • Their public liability cover
  • How the existing material will be dealt with

Choosing a commercial sealant contractor

Commercial clients in Fearnan

Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.

We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Fearnan. Several sites can go on one quote, which keeps the paperwork simple.

Common questions from Fearnan clients

Is Fearnan too far out for you?

Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Good photographs up front let us bring everything on the first visit.

What paperwork can you provide for a job in Fearnan?

We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.

Can you fit around our working hours?

The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.

Do you seal on top of existing sealant?

No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.

Can the building stay open while you work?

Yes, with some planning. Tell us your site hours and access windows and we’ll plan around them.

Can we approve the colour on site?

Yes. Where colour is critical, we can agree a short sample bead in a discreet spot. The colour can shift a little as it cures, so it’s worth checking in real light.

Will the sealant be an exact match to our finish?

No, not always. We match as closely as the product’s range allows and a sample can be approved before the full run.

Accreditations

Trusted. Accredited. Insured.