Kenmore coloured sealant
Work needed on a colour-matched joint in Kenmore? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Old sealant that has yellowed, darkened or faded
- Previous reseals that don’t match the original
- White or grey sealant that clashes with the finish
Coloured sealant for Kenmore sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Different surfaces, different methods
Shop-fit and joinery finishes
Counters, display units and wall linings are seen close up. A sharp, even bead is as important as the colour.
Cladding panels
Cladding joints are often seen across a whole elevation. We pick a facade-grade sealant in a shade that sits with the panels, rated for the joint’s movement.
How we handle coloured sealant in Kenmore
Colour is often written into the specification, by RAL reference or by matching a sample. Standard sealant ranges cover many colours, so we check what the specified product is made in at quote stage. We don’t promise an exact custom match, but we’ll show you the closest options. We work on natural stone and brick, office fit-out finishes and cladding panels, and the failures we’re asked to look at most are marked sealant in hotel bathrooms and patch repairs in several different colours. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Kenmore is the same: the right product in a properly prepared joint.
For work in and around Kenmore, we’d rather do everything on one trip, so it helps to have photographs and a full list first. Several jobs nearby can also be put together.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Kenmore (PH15)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Places near Kenmore
Also in Kenmore
Owners, agents and contractors
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. One quote can cover more than one site, which keeps the paperwork simple.
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Frontages, fit-outs and joints in Kenmore
The east of Scotland, where Kenmore is, gets less rain than the west. Cold snaps still affect when external joints can be sealed. There are several hotels within about 2 miles of Kenmore. Refits in hotels bring joints at vanity tops, bar counters and reception desks where the colour has to suit the scheme, with rooms done in turn while the rest stay let.
Refits at hotels like Kenmore Hotel, less than half a mile west of Kenmore, bring joints at vanity tops, bars and reception desks that guests see every day.
Kenmore is about 24 miles north-west of Perth, in Perth and Kinross. We cover Kenmore and the rest of Perth and Kinross, with the same fixed quotes and 12-month guarantee as everywhere else. Kenmore is one of 114 places in Perth and Kinross on our list for colour-matched joints. Sites around Dundee have their own page, about 40 miles away.
Work on colour-matched joints is covered throughout PH15, whatever the building. If your site is on The Square, Taymouth Drive and Pier Road or close by, we can quote for colour-matched joints. Close to Kenmore, our area also takes in Acharn (1 mile south-west), Fearnan (3 miles west), Boreland (4 miles west), Aberfeldy (6 miles north-east) and Little Ballinluig (9 miles north-east).
Around Kenmore
Other landmarks nearby include Scottish Crannog Centre (0.5 miles south-west) and Taymouth Castle (less than half a mile north). Green spaces nearby include Drummond Hill.
FAQs: Kenmore
Can you supply sealant in our brand colour for a site in Kenmore?
Yes, we can normally get close to most finishes from the product’s colour range. Available colours for the product are confirmed with the quote.
Must a hotel around Kenmore close while you work?
In the majority of cases no closure is needed: we work room by room or floor by floor. Housekeeping and our team agree each day’s rooms.
Do you work in Kenmore?
Yes. Kenmore falls within our area, and the simplest way to start is to ring 01277 525 020 or use the quote form.
Can you fit around our working hours?
We’re in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
What site paperwork can you supply?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
How do we ask for a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or email us. Include photographs or drawings if you have them.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
After the work
To get the most from the new sealant:
- Settle the colour with the designer at the start
- Keep harsh solvents away from visible joints
- Use one colour standard across multi-site work
- Plan full-run reseals on visible elevations
Note the sealant type and colour on the building file. It makes matching later repairs much easier, avoiding a patchwork.
Put the sealant colour into the specification or finishes schedule. Late decisions lead to substitutes and mismatches, so agree it with the designer at the start.
Why it’s worth doing now in Kenmore
A standard colour is quicker to source, though not always right. On visible work, the small extra effort of a colour from the product’s range pays off at handover. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Early resealing prevents it.
A quote for colour-matched joints depends on quantities, condition and access. Call for a quote.
What you get with us
- CSCS-carded applicators
- RAL and finish matching where the product range allows
- Constructionline member for supplier checks
- Coloured sealants to suit the setting, where available
See our cost guide or our accreditations.
On site: what to expect
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For a building near Kenmore, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- Photos or drawings show us the finishes and joints.
- Colour options from the specified product’s range are shared with you.
- Tell us your site hours and access windows and we will plan around them.
- Joints are prepared, primed where specified and backed.
- We seal in the approved colour and tool it smooth.
What we need from you
- Agree which areas must stay open
- Move anything stored against the joints
- For older buildings, check the asbestos register before work
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or send details through our quote form with what you know.
Read more
Signs you need coloured sealant in Kenmore
Most enquiries start with a joint that looks wrong: white silicone against dark cladding, grey against timber or a yellowed bead on stone. Replacing it with a suitable colour restores the intended look.
Clients usually get in touch after noticing one or more of the following:
- Smeared sealant on stone or joinery
- Joints that need to match a new RAL frame colour
- Coloured joints that have cracked with movement
- A bead that fights the cladding or frame colour
A lasting commercial joint around Kenmore begins with the old bead fully out and the faces clean and dry.
Comparing quotes
- How they handle RAMS and site documents
- Is the sealant right for the movement and the substrate?
- Do they follow the manufacturer’s priming guidance?
- The terms of the workmanship guarantee