Boreland commercial sealant contractors
Commercial sealant contractors in Boreland, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Mouldy silicone around WCs, urinals and vanity tops
- External beads that have gone brittle and cracked
- Window and door perimeter joints that have cracked open
Commercial sealant contractors for businesses in Boreland
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Commercial sealant contractors in Boreland
Inside a commercial building, sealant does a lot of quiet work: around sanitaryware, along worktops and splashbacks, at window boards, partition heads and floor junctions. Externally it keeps rain out of frame perimeters, panel joints and movement joints. We deal with internal and external sealant joints alike. Site teams most often ask us about frame mastic that has hardened and come away from the wall and leaks that seem to come through a sealant line, across kitchen worktops and splashbacks, movement joints in walls and floors and window and door perimeters. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Boreland, that means joint design, primers and backing rod as standard.
Multi-site clients with buildings in and around Boreland can put several sites on one programme, with one quote format and one point of contact.
For work in and around Boreland, we’d rather do everything on one trip: send photos and a complete list so the right products and colours come on the day. If neighbouring businesses have work too, the visits can be grouped.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Boreland (PH15)
- Wider area
- Perth and Kinross
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What the job involves on each surface
Facade and cladding joints
Facade joints move every day as panels warm and cool. The product has to suit the movement, and the depth has to be controlled with backing. We confirm the access in place before we quote.
Commercial kitchens and tea points
In kitchens, sealant lines at worktops, sinks and wall panels take heat, grease and daily cleaning. They’re degreased thoroughly before resealing, with a food-safe or hygienic product wherever food contact can happen.
Working on commercial sites near Boreland
Boreland is in the west of Scotland, the wetter side of the country. Outside sealing needs dry spells and a programme that can move a little. Weather-facing frames tend to need resealing before the sheltered ones
A lasting commercial joint around Boreland begins with the old bead fully out and the faces clean and dry. For premises around Boreland where the joint is seen, colour options for the product are confirmed with the quote.
Boreland is about 17 miles north-west of Crieff, in Perth and Kinross. Any commercial site in Boreland is covered. 114 places across Perth and Kinross fall within our area, including Boreland. Our Dundee page has more on work in that area, about 43 miles away.
Postcode districts covered here: PH15. If your site is on Tay Sealladh and Tigh na Loan or close by, send details and we will quote for sealant joints. Sites close to Boreland are covered too, including Fearnan (1 mile east), Acharn (3 miles east), Kenmore (4 miles east), Aberfeldy (9 miles east) and Kinloch Rannoch (9 miles north-west).
Around Boreland
A little further out are Scottish Crannog Centre (3.3 miles east) and Carnbane Castle (3.2 miles north-west). The countryside around Boreland includes Drummond Hill and Lochan nan Uan.
Questions about Boreland
Can the sealant on our Boreland premises match the finishes?
Yes, we can typically get close to most finishes from the product’s colour range. Send colour references or photographs and we’ll confirm what’s available for the product.
Is Boreland too small for you to travel to?
No. Places such as Boreland are covered as much as the big towns. Every Scottish council area is within our area. Where we can, we group nearby jobs to make the most of each trip.
How do we get a quote?
Send photos, drawings or a list of locations through the quote form on this site. If a visit is needed we will book one, and a fixed quote follows.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
What guarantee do you give on resealing?
Our workmanship is guaranteed for 12 months. Public liability insurance is in place too.
Is the old sealant taken out first?
Removal of the failed sealant is always part of the job. New sealant can’t grip the old bead, so laying over it never lasts; the faces are then cleaned and prepared.
Does weather matter for sealant work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Diagnose, treat, sign off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work normally takes a few hours for one area, or a planned series of visits across a bigger building, and we clear our waste as we work. Travel to smaller Scottish places like Boreland is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- First, details reach us through the quote form or a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Work is phased around your occupiers where areas need to stay in use.
- Old sealant is cut out completely, never sealed over.
- A suitable product for each joint goes in at the right depth and is tooled.
- We check the work with you, and the 12-month guarantee starts.
Preparing the site
- Send your site hours and access windows
- Move anything stored against the joints
- Let us know about inductions and permits
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Read more
Owners, agents and contractors
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Boreland can form part of a wider programme across Perth and Kinross.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
What sets the cost
Your fixed quote is built from the real scope. It allows for:
- Site requirements such as inductions and permits
- Access and working height
- How much existing material needs removing
- Working within restricted access windows
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we’ll explain how it’s made up.
Before you send an enquiry
To price the job accurately, we need to understand the site. Useful things to include:
- The product your specification calls for
- How the joints are reached, and at what height
- Whether the building will be occupied during the work
- Drawings or a marked-up plan, if available
To get a fixed quote, call 01277 525 020 or email drawings and photos with the site address and an outline of the work. Our quote form is another easy route.
Other services in Boreland
Doing it in-house
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Why deal with it now?
Leaving a failed joint rarely saves money. Once water gets behind the seal, finishes and ceilings underneath are next, which brings decorators and flooring contractors into the repair. Dealing with it while the damage stops at the bead is the cheaper route. Renewing every failing joint on one visit is the sensible approach for a place like Boreland. Photos of each area help us quote the whole job.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why us?
- Constructionline member
- A range of standard colours, depending on the product
- Public liability insurance in place
- One contact handling all your sites
Read how commercial sealant jobs are priced or how we’re accredited.