Port Dundas washroom sealing
We carry out sealing in commercial washrooms, showers, kitchens and wet areas in Port Dundas and the surrounding area. Send photos or drawings for a fixed quote.
- Failed sealant in a tea point or staff kitchen
- Mould spotting along silicone joints
- Shower tray joints that have opened up
Washroom sealing in Port Dundas
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Keeping the joints sound
Your facilities or cleaning team can help the joints last. Share these points with them:
- Photograph and log failed joints across the estate
- Share your site rules when you send details
- Don’t leave trays and floors sitting wet
- Make sure washroom ventilation is running
Add washroom sealant to routine inspections. Check for mould spots, splits, lifting edges and open joints at trays, basins and urinals and photograph anything new.
In food areas, cleanability is something environmental health officers look at. Resealing sinks, worktops and splashbacks before an inspection is a simple step.
About our washroom sealing in Port Dundas
Closing all the facilities in a building isn’t an option. We phase the work one washroom, one bank of cubicles or one changing room at a time, so staff, guests or pupils always have somewhere to go. Give us your site hours and access windows and the phasing is planned around them. If you’re dealing with discoloured joints around urinals and WC pans and open joints along basins and vanity units, we can put it right. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Port Dundas is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Hospitality businesses in Scotland’s cities rely on washrooms and kitchens that look right and clean easily. We use anti-mould silicone in washrooms and food-safe hygienic sealant at kitchen worktops.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Port Dundas (G4, G2, G3)
- Region
- Glasgow
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Wet areas in Port Dundas’s workplaces
The west of Scotland, where Port Dundas is, gets more rain than the east. Where ventilation is poor, damp washrooms here tend to see black mould in the sealant sooner. There are two care or nursing homes within about 2 miles of Port Dundas. In a care setting, a mouldy or lifting joint in a wet room is a hygiene issue as much as a cosmetic one. We plan the work with the manager so residents are disturbed as little as possible.
For centre management at a site such as The Savoy Centre, 0.6 miles south of Port Dundas, washroom work is planned around footfall. At a hospital like Glasgow Royal Infirmary, 1 mile south-east of Port Dundas, patient and staff washrooms are best done in short phases agreed with the ward.
Port Dundas is about 2 miles north-east of Glasgow, in Glasgow. Any commercial site in Port Dundas is covered, whether it’s a single job or part of a planned programme. Port Dundas is one of 171 places we cover in Glasgow.
Commercial sites across G4, G2 and G3 are covered for washrooms and wet areas. Among the streets we cover are Possil Road, Dawson Road and Braid Square, and sites on any of them can send details for a fixed quote. Port Dundas sits on or close to the A804. If your building is just outside Port Dundas, we cover Cowcaddens (1 mile south-west), Hamiltonhill (1 mile north-west), Sighthill (1 mile east), Townhead (1 mile south-east) and Garnethill (1 mile south-west). Nearby towns on our patch include Langside (3 miles south), Yoker (5 miles west), Mount Florida (4 miles south), Hillpark (4 miles south), Shawlands (3 miles south-west) and Temple (3 miles north-west).
Around Port Dundas
Recent enquiries here include premises near Andersonian Library, St Vincent Street Church and College of Piping and the streets around them. Nearby too are Kelvingrove Park (1.3 miles west) and 81 pub (0.7 miles south). The closest station to Port Dundas is Glasgow Queen Street station, roughly 0.7 miles south of the centre. Other landmarks nearby include Bishop's Castle (1 mile south-east) and Chinatown (under half a mile south-west). For a walk, there’s Hogganfield Loch and Lenzie Moss.
Why act early in Port Dundas
Gaps and mould in joints give dirt and bacteria somewhere to sit which matters most in healthcare, food and education settings. Sound, smooth joints are much easier to keep clean. Failed sealant in a shared building in Port Dundas can affect more than one owner. Fixing it promptly keeps repairs small.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why appoint us
- 12 months’ guarantee on every job
- Sealing commercial buildings since 2005
- Work to your specification and the manufacturer’s guidance
- RAL and finish matching where the product range allows
What we are called out for in Port Dundas
Cubicle panels, IPS panels and vanity units flex when people lean on them or doors are slammed, and shower trays shift under foot. A bead that can’t cope with the movement splits along one edge.
Any of the following is a good reason to get the joints checked over:
- Black mould inside silicone joints that cleaning can’t shift
- Panel joints letting water behind
- Shower tray joints that have opened up
- Resealing that didn’t last because the old bead stayed
At a university such as Glasgow Caledonian University, under half a mile south of Port Dundas, summer is the usual window for resealing residence bathrooms.
What to look for in a quote
- Do they follow the manufacturer’s priming guidance?
- Who will actually carry out the work
- How long is the guarantee, and what does it include?
- What site paperwork they can supply
FAQs: Port Dundas
Will you work in a care home in Port Dundas without moving residents out?
Yes. We work around residents’ routines, a room or two at a time. We follow the home’s own procedures throughout.
Will you plan work around the academic year at somewhere like Glasgow Caledonian University?
Yes. We plan campus work around teaching, exams and residence turnarounds. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
How many days will you need on site?
That varies with the scale of the job, though a typical visit typically takes a few hours for one toilet block, with bigger buildings phased across a number of visits. For bigger or phased jobs, we’ll set out a timescale with the quote.
Should maintenance staff do it?
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong usually costs more in the end than doing them right.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
On site: what to expect
In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before we move to the next. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Tell us the rules and we’ll work to them.
- Every room is surveyed and the failed joints listed.
- You get a fixed quote with the phasing plan.
- The whole of the old bead is removed.
- Each joint is cleaned and left dry.
- A sanitary silicone bead is laid and given a smooth tooled finish.
- Each area is handed back when ready.
Preparing the site
- Make sure the joints can be reached
- Explain the parking and delivery arrangements
- Tell us what induction or permit system the site runs
Get a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
Nearby places to Port Dundas
Also in Port Dundas
What sets the cost
To price the job, we consider:
- Backing rod, priming and other preparation
- Removal of failed or old sealant
- Phasing around occupants
- Specialist products, such as fire-rated or hygienic sealants
A quote for washrooms and wet areas depends on quantities, condition and access. Call for a quote.
Before you send an enquiry
The more we know, the firmer the quote. Helpful details to send:
- Specification clauses that apply
- Photos of the joints, close up and from further back
- Whether the building will be occupied during the work
- How the joints are reached, and at what height
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. If you have questions first, ring 01277 525 020 or email drawings and photos.