Washroom Sealing contractors in Old Blair
Washroom sealing in Old Blair, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Discoloured joints around urinals and WC pans
- Shower tray joints that have opened up
- Washrooms that look worn because of the sealant
Need washroom sealing in Old Blair?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Washroom sealing for commercial buildings in Old Blair
In healthcare and care settings, sealing is part of keeping surfaces cleanable. We work to your organisation’s estates and infection-control requirements and any site permits. Any records you need are confirmed with the quote. If you’re dealing with sealant laid over old silicone and now peeling and failed sealant in a tea point or staff kitchen, we can help, on vanity units and basins, accessible toilets and changing rooms and IPS panels and cubicles alike. One point of contact handles commercial sealant work in Old Blair from the first photographs to the final walk-round, whether it’s one building or several.
Travel to smaller places like Old Blair is planned so the work is finished on one visit. Send photos and a room list and we will give a fixed quote.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Location
- Old Blair (PH18)
- Region
- Perth and Kinross
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Questions we are asked in Old Blair
Will the toilets in our Old Blair building be out of use?
Normally only some of them, for a short time. We work in phases so other facilities stay open. We’ll tell you the curing time for the product before we start.
Will our hotel in Old Blair need to close for the work?
Rarely, if ever. We take a few rooms out at a time. We agree the order of rooms and the timings with you before we start.
Is old silicone taken out first?
We always remove it. Fresh silicone can’t key to an old bead, so sealing over it soon peels.
Can washrooms stay open while you work?
The work is phased so users always have somewhere to go. One washroom, one bank of cubicles or one changing room is done at a time around your site hours and access windows.
What will the job cost?
Every job gets its own fixed quote. For yours, phone 01277 525 020 or email us with a description of the work.
When can showers be used after new sealant?
Each sealant has a cure time before it should get wet. Phasing is planned with the cure time in mind so facilities are never short.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For a building near Old Blair, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- Every washroom is checked joint by joint, with loose panels, leaks or damp noted for the right trade.
- The phasing is agreed so there are always facilities open.
- We strip out the old bead and clean off the residue left behind.
- Joints are cleaned, degreased and dried before sealing.
- New sanitary silicone with anti-mould additives goes in and is tooled neat.
- Rooms reopen after the product’s cure time, and we move to the next.
Getting the site ready
- Point out parking and an unloading spot
- Warn occupants and staff about the work
- Make sure the joints can be reached
Request a quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, phone 01277 525 020 or use the quote form.
Read more
Nearby places to Old Blair
What else we do in Old Blair
What happens if it’s left?
Sealing on top of old silicone saves nothing. It doesn’t bond, so it peels and traps dirt behind it. Cutting out completely and cleaning back takes a little longer and lasts. Renewing every failing joint on one visit is the sensible approach for a place like Old Blair. Send photos and we will quote for everything together.
Pricing washrooms and wet areas depends on quantities, condition and access. Ask us for a fixed quote.
Why appoint us
- Public liability insurance in place
- Products installed to the manufacturer’s instructions
- Colour options checked against the specified product
- A Constructionline member, so easy to vet
Site staff or a sealant specialist?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Wet areas in Old Blair’s workplaces
Old Blair has a number of hotels close by, all within 2 miles. Each has en suites, back-of-house toilets and kitchens with sealant that moulds and splits. We work a handful of rooms at a time, so the hotel keeps letting the rest. Being in the east of Scotland, Old Blair gets less rain than the west coast. Even so, a washroom that doesn’t dry out between uses will see mould get into its sealant.
Washrooms near Old Blair get the old silicone stripped out and a fresh anti-mould bead on dry joints. For a hotel such as Atholl Arms Hotel, which lies south-east of Old Blair, resealing en suites a few rooms at a time keeps the rest available.
Old Blair is about 23 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Our applicators travel to Old Blair for work on washrooms and wet areas, handled exactly as we handle every other area. Across Perth and Kinross, 114 places are covered, Old Blair among them. For work in that direction, see our Dundee page.
We cover the PH18 postcode districts. Just outside Old Blair, we also work in Bridge of Tilt (1 mile east), Blair Atholl (1 mile east), Old Struan (4 miles west), Moulin (6 miles south-east) and Pitlochry (7 miles south-east). For island and remote sites, we plan travel and materials carefully.
Near you in Old Blair
For rail, the closest station is Blair Atholl station, about 0.5 miles south-east of the centre. Well-known places in the area include Atholl Country Life Museum (0.5 miles south-east) and Blair Castle (under half a mile north). Green spaces nearby include Loch Moraig and Creag Odhar.
What we can’t put right
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Condensation from failed extract fans
- Water from plumbing, not from a joint
- Failed tanking beneath a wet-room floor or behind tiles
If you’re not sure, just speak to us on 01277 525 020 or email drawings and photos and we will give you a straight answer.
Joints and surfaces we work on
- IPS panels and cubicles
- Kitchens and tea points
- Urinals and WCs
- Vanity units and basins
- Showers, trays and wet room floors
- Accessible toilets and changing rooms
Aftercare for building managers
For the best life from the joints:
- Report split joints at trays and basins early
- Mention any site permits or estates rules at quote stage
- Photograph and log failed joints across the estate
- Avoid scourers and harsh descalers on silicone
Include sealant joints in your planned maintenance checks. Check for mould spots, splits, lifting edges and open joints at trays, basins and urinals and log what you find.
A few failed joints can be resealed with hardly any disruption. Left, it tends to become a building-wide job and more closures to manage.
Commercial clients in Old Blair
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.