Floor Joint Sealing in Old Blair
Floor joint sealing and filling in warehouses, factories and industrial units in Old Blair. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Untidy open joints in a retail unit
- Joint edges breaking up under truck wheels
- Flexible sealant torn out by wheels
Floor joint sealing near Old Blair
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our floor joint sealing in Old Blair
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Pricing depends on the length of joint, how worn the edges are and when we can get in and the figure is fixed before work begins. Site teams most often ask us about brittle joint filler breaking up and loading bay joints breaking down, on saw-cut induced joints, forklift and pallet-truck routes and construction joints. Most enquiries from Old Blair start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
For floor or movement joints around smaller places like Old Blair, we plan to finish in one visit where we can. Send photos, joint widths and details of the traffic first.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Old Blair (PH18)
- Region
- Perth and Kinross
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Should maintenance staff do it?
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
What the job involves on each surface
Semi-rigid joint fillers
For trafficked warehouse joints, semi-rigid fillers are common. We place them to depth and trim them level with the slab.
Saw-cut induced joints
Saw cuts are made soon after the slab is cast so shrinkage cracks follow a line. They start narrow and widen as the concrete dries, and on truck routes they need a filler that supports the edges.
Questions about Old Blair
Which documents can you supply for work in Old Blair?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
Is Old Blair off your patch?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
How soon can traffic go back on the floor?
Each product has its own cure time and cooler floors take longer. We plan the phasing so that waiting time fits your operation.
Why has the filler pulled away from one side?
Young concrete carries on shrinking for a long time and a stiff filler can separate down one side. It is usually dealt with by topping up.
What information helps you price floor joint sealing?
Approximate metres of joint, photographs of typical and worst areas, and a floor plan let us give a quick quote. We can visit where that helps so call the office on 01277 525 020 or email drawings and photos to set one up.
How many days will you need on site?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we will send them with the quote.
On site: what to expect
At the end of each section, the masking comes off, the area is cleaned and every joint is checked with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. Tell us who will meet us and how to get in at your building near Old Blair. That goes into the plan alongside the quote.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Preparing the site
- Tell us which areas need to stay in use
- Let building users know which areas are affected
- Tell us what induction or permit system the site runs
Getting a fixed quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or use the quote form.
Related advice
Aftercare for building managers
For the best life from the joints:
- Plan for a top-up on newer floors
- Keep grit out of unfilled joints in the meantime
- Make joint checks part of your floor inspections
- Put loading bays at the top of the list
On younger slabs, a fine line can open down one side of a filled joint as the concrete keeps shrinking. That is common and is usually dealt with by topping up once the slab has settled down in most cases.
A broken joint on a main route is crossed by every truck on that route. Sorting it early looks after your equipment as well as the slab.
Floors, slabs and movement joints in Old Blair
Being in the east of Scotland, Old Blair gets less rain than the west coast. Frost and de-icing salt still find their way into open external joints. Sealing them before winter limits the damage.
Around Old Blair, each joint gets a filler or sealant matched to what crosses it and how much it moves. Once a joint near Old Blair opens up, grit and water get in and the edges start to break.
Old Blair is about 23 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Our applicators travel to Old Blair for work on floor joints, handled exactly as we handle every other area. 114 places across Perth and Kinross fall within our area, Old Blair among them. Sites around Dundee have their own page, roughly 39 miles from Old Blair.
If you need floor joint sealing in PH18, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Nearby places we also cover include Bridge of Tilt (1 mile east), Blair Atholl (1 mile east), Old Struan (4 miles west), Moulin (6 miles south-east) and Pitlochry (7 miles south-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Local landmarks in Old Blair
For rail, the closest station is Blair Atholl station, roughly 0.5 miles south-east of the centre. Other landmarks nearby include Atholl Country Life Museum (0.5 miles south-east) and Blair Castle (under half a mile north). Not far away are Loch Moraig and Creag Odhar.
Also near Old Blair
Also in Old Blair
For managing agents and facilities managers
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Old Blair can sit alongside others in a wider programme across Perth and Kinross.
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
What sealant work can’t fix
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- A floor that is out of level for the racking or trucks
- A floor that rocks at the joints, which needs a structural fix
- Structural cracking in the slab
Not sure which it is? You can call the office on 01277 525 020 or email a schedule or drawings and we will tell you honestly before you book.
What we seal
- Loading bays
- Retail and showroom floors
- Construction joints
- Joints along racking aisles
- Saw-cut induced joints
- Forklift and pallet-truck routes