
Coloured and colour-matched sealant in Old Blair, Perth and Kinross
Looking for coloured sealant in Old Blair? It’s simple: send details, get a quote, we seal, guaranteed.
- Old colour-matched joints lifting at the edges
- White or grey sealant that clashes with the finish
- Hotel refurbishments with a set colour scheme
Coloured sealant across Old Blair
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Old Blair: questions and answers
Can you supply sealant in our brand colour for a site in Old Blair?
Yes, we can normally get close to most finishes from the product’s colour range. Send colour references or photographs and we’ll confirm what’s available for the product.
Is Old Blair too far out for you?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. We plan jobs in smaller places so return trips are kept to a minimum.
What about RAMS and site documents?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it, flagging anything that needs clarifying.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
What hours do you work?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
How we handle coloured sealant in Old Blair
We can agree a short trial length before the full run. Cured sealant may look a shade different from the wet bead, and lighting changes it again, so approving a sample on site is worth doing. Let us know who signs off colour, and we’ll fit the sample into the programme. Most enquiries involve previous reseals that don’t match the original and old colour-matched joints lifting at the edges, on powder-coated and anodised frames, hotel bathrooms and public areas and natural stone and brick. Looking for mastic applicators who cover Old Blair? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
For a job around Old Blair, the Scottish weather is part of the planning: outside joints need dry, frost-clear surfaces, so we agree a window with some give in it. Indoor work isn’t held up by rain.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.

- Where
- Old Blair (PH18)
- Wider area
- Perth and Kinross
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Aftercare for building managers
To get the most from the new sealant:
- Don’t let trades patch coloured joints with a random sealant
- Plan full-run reseals on visible elevations
- Standardise colours across a portfolio
- Protect fresh coloured sealant from dust and handling
Colours can soften with light and weathering. Some fading is part of normal ageing outdoors, and resealing restores the look when the time comes.
Plan resealing of visible joints before they look tired. Replacing them on a schedule keeps finishes looking right across the building.
Diagnose, treat, sign off
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed before the next one starts. Travel to smaller Scottish places like Old Blair is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- Photos or drawings show us the finishes and joints.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- The agreed colour is installed and tooled neatly.
Preparing the site
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we’ll be in
- For older buildings, check the asbestos register before work
Getting a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Read more
Why act early in Old Blair
Standard white or grey sealant is cheaper to stock, but it doesn’t always suit the finish. On visible work, the small extra effort of a colour from the product’s range pays off. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Old Blair, a repair visit takes planning, so it’s better to act early.
Pricing colour-matched joints depends on how many there are, their condition and the access. Call for a quote.
Why choose Mastic Doctor in Old Blair
- Coloured sealants to suit the setting, where available
- CHAS accredited contractor
- Workmanship guaranteed for 12 months
- A fixed quote before work starts
Read our cost guide and how we’re accredited.
Nearby places to Old Blair
Other services in Old Blair
Site staff or a sealant specialist?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
What affects the price in Old Blair
The price varies from site to site. Expect it to depend on:
- The total length or number of joints
- How accessible the joints are
- Travel to remote or island sites
- Whether old sealant has to be cut out first
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- Clear photos of the problem areas
- The site address and postcode
- The asbestos register, for older buildings
- Any specification or named product
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or ring 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Coloured sealant in Old Blair: the local picture
A 2-mile radius around Old Blair takes in a number of hotels. Refits in hotels bring joints at vanity tops, bar counters and reception desks where the colour has to suit the scheme. The east of Scotland, where Old Blair is, gets less rain than the west. Frost and condensation on winter mornings can still hold up external sealing. Outside work is booked with that in mind
Refits at hotels like Atholl Arms Hotel (to the south-east of Old Blair) bring joints at vanity tops, bars and reception desks that guests see every day. Premises within reach of Blair Atholl station, 0.5 miles south-east of Old Blair, often have busy frontages where joints are seen by everyone passing.
Old Blair is about 23 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. We send applicators to Old Blair for colour-matched joints. We work across 114 places in Perth and Kinross, from busy centres to rural villages. For work in that direction, see our Dundee page.
Postcode districts covered here: PH18. Nearby places we also cover include Bridge of Tilt (1 mile east), Blair Atholl (1 mile east), Old Struan (4 miles west), Moulin (6 miles south-east) and Pitlochry (7 miles south-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Old Blair
The nearest railway station is Blair Atholl station, roughly 0.5 miles south-east of the centre. Nearby you’ll also find Atholl Country Life Museum (0.5 miles south-east) and Blair Castle (under half a mile north). Not far away are Loch Moraig and Creag Odhar.
What the job involves on each surface
Paintable sealants
Overpainting is most common on internal joints with little movement. If the joint needs a product that can’t be painted, we say so.
Brick and masonry
Brickwork joints typically look best in a colour close to the mortar or brick. The nearest colour in the range is agreed with you for the elevation.