Commercial washroom and wet-area sealing in Hollington, Hampshire
Sealing in commercial washrooms, showers, kitchens and wet areas in Hollington. CHAS accredited and fully insured, with a 12-month guarantee.
- Mould spotting along silicone joints
- Shower tray joints that have opened up
- Failed sealant behind washroom basins
Washroom sealing across Hollington
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Washroom sealing in Hollington, done properly
In a busy washroom, the sealant usually gives up long before the tiles or fittings. Basin tops, urinal backs, panel joints and shower trays put it under water, chemicals and daily cleaning and mould that roots into it can’t be cleaned away. The fix is to remove it completely and reseal with sanitary silicone containing anti-mould additives. We work on kitchens and tea points, urinals and WCs and IPS panels and cubicles, and the failures we’re asked to look at most are complaints from staff, guests or users about tired washrooms and sealant lifting along a tray edge. One point of contact handles commercial sealant work in Hollington from the first photographs to the final walk-round, whether it’s one building or several.
Rural businesses near smaller places such as Hollington, from cafés to event venues, rely on washrooms and kitchens that stay clean. Tell us your opening times and quiet periods and we’ll plan around them.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Hollington (RG20)
- Region
- Hampshire
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Why act early in Hollington
Bleaching black sealant may lighten it for a few days, but the mould is rooted in the silicone and comes back. Replacement deals with the cause in the joint and cleaners stop fighting a losing battle. Converted and older buildings near places like Hollington tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Why clients in Hollington choose us
- One number for every site we cover
- 12-month guarantee on workmanship
- Constructionline member for supplier checks
- A range of standard colours, depending on the product
See our cost guide and how we’re accredited.
Surface by surface
Changing rooms and gyms
Changing rooms in gyms and leisure centres stay wet and warm so sealant there works very hard. Anti-mould sanitary silicone is the standard choice.
Urinals and WC pans
Joints around urinals and WC pans take splashes, cleaning chemicals and knocks. Stained or split joints here trap smells and make the room look neglected.
Keeping the joints sound
Regular inspection catches problems early. In particular:
- Mention any site permits or estates rules at quote stage
- Avoid scourers and harsh descalers on silicone
- Include joints in routine washroom inspections
- Respect the cure time before reopening each room
Where possible, have shower floors and trays squeegeed after busy periods. Standing water on a joint all day shortens its life.
A split joint at a shower tray can leak for a long time before anyone sees it. By then, other trades may be needed as well so failed joints are worth acting on quickly.
From enquiry to sign-off
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Smaller jobs around Hollington can be grouped with others nearby. A fixed quote is given before anything starts.
- Every washroom is checked joint by joint, with loose panels, leaks or damp noted for the right trade.
- We agree which rooms close and when, so users always have somewhere to go.
- The failed silicone is stripped and every face scraped clean of residue.
- Each joint is degreased and left dry, because silicone won’t bond to damp or soapy surfaces.
- We lay a sanitary silicone bead and tool it smooth so it is easy to clean.
- Each room is handed back once the sealant has had its cure time.
Before we start on site
- Have the specification and drawings to hand
- Tell us your opening times and when work is allowed
- Tell staff and tenants when we will be in
Request a quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or give us a call on 01277 525 020 or send photos by email if you’d rather talk the job through.
Read more
When to bring in a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Washroom sealing in Hollington: the local picture
At about 57 miles from central London, Hollington is within reach of the capital. Washrooms in commuter-belt offices take constant weekday traffic, so we work a block of facilities at a time.
Schools such as St Thomas' Church of England Infant School have toilets, changing rooms and kitchens that are best resealed in the holidays. Church halls and community buildings, such as those at Church of St Thomas, have kitchens and toilets used by many groups, and their sanitary sealant works hard.
Hollington is about 5 miles south-west of Newbury, in Hampshire. We send applicators to Hollington for washrooms and wet areas. Hollington is one of 723 places in Hampshire on our list for washrooms and wet areas. There’s a separate page for Reading, about 20 miles away.
We take on washrooms and wet areas across the RG20 postcode area, whatever the building. If your building is just outside Hollington, we cover Highclere (1 mile north-east), Woolton Hill (2 miles north-east), Penwood (2 miles north-east), Ball Hill (2 miles north) and Enborne Row (3 miles north-east). Bigger towns within reach include Basingstoke (14 miles east), Andover (10 miles south-west), Tadley (11 miles east), Popley (14 miles east), Tidworth (13 miles south-west) and Kempshott (13 miles south-east).
Local landmarks in Hollington
For rail, the closest station is Kintbury station, roughly 4.9 miles north-west. Nearby you will also find Newbury Castle (4.2 miles north). For a walk, there’s Kintbury Newt Ponds and Pilot Hill.
FAQs: Hollington
Is Hollington too far out for you?
No. Places such as Hollington are covered as much as the big towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
What paperwork can you provide for a job in Hollington?
RAMS, insurance certificate, CSCS details: list what the site needs and we will confirm it with the quote. We are CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
How long before the toilets can reopen?
The silicone needs time to cure before water reaches it. Phasing is planned with the cure time in mind so facilities are never short.
Do you work in hospitals, clinics and care homes?
Yes. Your infection-control rules, estates requirements and permits are followed. The work is phased around patients or residents.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Do you guarantee washroom sealing?
Our workmanship has a 12-month guarantee, and we carry public liability insurance.
Will all the toilets be closed at once?
Just the room being resealed is out of use. Each room reopens after the sealant’s cure time, then we move on.
How the quote is worked out
To price the job, we consider:
- The total length or number of joints
- Location, for remote and island sites
- The size and state of each joint
- Induction, permit and paperwork requirements
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
Details that help us quote
It doesn’t need to be a full survey. A few details are enough to get going:
- Rough lengths or quantities, or drawings if you have them
- Where the site is, with the postcode
- The type of building and who uses it
- Any dates the work must fit around
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.