Facade and window perimeter sealing in Hollington, Hampshire
Our CSCS-carded applicators take on facade joint and window perimeter sealing on commercial buildings in Hollington. Send photos or drawings for a fixed quote.
- Sealant pulling away from frames or panels
- Hard, chalky sealant that no longer flexes
- Failed sealant on precast panel joints
Facade sealing for Hollington sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our facade sealing in Hollington
We seal window and door perimeters, cladding panel joints, external facade joints and perimeter joints where frames meet the structure. Where sealant is the specified fix, we also take on coping and flashing joints. If you have old perimeter mastic that has dried out and water coming in around window frames, we can put it right, on shopfront frames, cladding panel joints and stone and brick facade joints alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Hollington, preparation and product choice get the time they need.
In the countryside around places like Hollington, conversion schemes put new frames into old stone, flint, brick or timber. Those joints need a sealant that suits an uneven, sometimes porous surface, and often a colour chosen for the building.
Our workmanship is guaranteed for 12 months, in Hollington as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Hollington (RG20)
- Region
- Hampshire
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When to call us in Hollington
A frequent fault is a bead stuck to the joint’s rear face as well as its sides. With no backing, the sealant is restrained.
What tends to prompt an enquiry:
- Staining on stone next to old sealant
- Water coming in around window frames
- Cladding panel joints that have opened up
- Failed seals around shopfront and entrance frames
Older buildings in the area around Hollington, such as Stargroves, 0.8 miles north-west of Hollington, need care when sealed: the product has to suit soft or historic materials.
Before you book anyone
- What site paperwork they can supply
- The terms of the workmanship guarantee
- The named product and why it was chosen
- Their plan for phasing and protecting the area
Nearby places to Hollington
Also in Hollington
Facade sealing in Hollington: the local picture
The South East is one of the drier parts of the UK. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, so the external programme keeps a little slack. At about 57 miles from central London, Hollington is within reach of the capital. Towns within reach of London tend to keep building, from flats to offices and schools, and main contractors there need mastic that keeps to the programme.
For contractors at a school such as St Thomas' Church of England Infant School, sealing has to be finished before term starts.
Hollington is about 5 miles south-west of Newbury, in Hampshire. Looking for facade sealing in Hollington? We can help. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. Sites around Reading have their own page, about 20 miles away.
We cover the RG20 postcode districts for facade joints. Just outside Hollington, we also work in Highclere (1 mile north-east), Woolton Hill (2 miles north-east), Penwood (2 miles north-east), Ball Hill (2 miles north) and Enborne Row (3 miles north-east). Bigger towns within reach include Basingstoke (14 miles east), Andover (10 miles south-west), Tadley (11 miles east), Popley (14 miles east), Tidworth (13 miles south-west) and Kempshott (13 miles south-east).
Local landmarks in Hollington
The closest station to Hollington is Kintbury station, roughly 4.9 miles north-west. Other landmarks nearby include Newbury Castle (4.2 miles north). Open spaces near Hollington include Kintbury Newt Ponds and Pilot Hill.
How the quote is worked out
What shapes the price:
- Any access equipment needed
- Whether old sealant has to be cut out first
- The site’s rules and procedures
- The total length or number of joints
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Send us:
- Anything awkward about access or site hours
- Your programme or deadline
- The product your specification calls for
- The site address and postcode
To get a fixed quote, call the office on 01277 525 020 or email a schedule or drawings. Our quote form is another easy route.
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Check that rainwater leaves the facade the way it was designed to
- Brief window cleaners about newly sealed joints
- Combine resealing with other works that need access
- Inspect facade joints on a regular cycle
Following storms, look inside for damp or staining near frames. Catching a new leak early keeps the repair small.
In pre-2000 buildings, check the asbestos register before old sealant is cut out. Older sealants can contain asbestos, and if it’s suspected, we stop until it has been tested.
How a job runs
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. For a building around Hollington, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- We look at the joints, the drawings and the access before pricing.
- The old bead is cut away completely, not overlaid.
- Both faces are cleaned and, where the product needs it, primed.
- Closed-cell rod fixes the depth, and the sealant grips two sides only.
- A facade-grade sealant rated for the movement goes in, tooled to a concave profile.
- The completed runs are checked with you, then the 12-month guarantee applies.
Before we start on site
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we’ll be in
- Send asbestos survey details if the building is pre-2000
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call the office on 01277 525 020 or use the quote form.
Related advice
FAQs: Hollington
What documents will you need to give us for a job in Hollington?
RAMS, insurance certificate, CSCS details: list what the site needs and we’ll confirm it with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
Can the mastic package for our job in Hollington follow the site programme?
Yes. The mastic is planned around your key stages. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Are you insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards.
Is colour matching possible?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We’ll confirm the colours available for the specified product.
Do you run new sealant over the existing bead?
No. Overlaying is a shortcut that peels away quickly. Our method is a full cut-out, cleaning, backing and a new bead.
Do you use silicone for external joints?
Low-modulus, neutral-cure silicone suits many facade and perimeter joints. Some joints call for hybrid, PU or polysulphide instead, depending on the substrate and the specification.
Owners, agents and contractors
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Building owners and managing agents use us on everything from one building to a spread of sites around Hollington. One quote can cover more than one site, which keeps the paperwork simple.
Surface by surface
Perimeter joints at frames and structure
Perimeter joints at frames often show their age first. They are cut out, cleaned, backed and resealed using a sealant classified for that use.
Coping and flashing joints
Sometimes the coping or flashing itself has failed. Where the issue isn’t the sealant, we say so.