Washroom Sealing contractors in Kempshott
Sealing in commercial washrooms, showers, kitchens and wet areas in Kempshott. CHAS accredited and fully insured, with a 12-month guarantee.
- Urinal joints that look unhygienic
- Washrooms that look worn because of the sealant
- Kitchen worktop joints that can’t be kept clean
Washroom sealing in Kempshott
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Washroom sealing for commercial buildings in Kempshott
Accessible toilets, shower rooms and changing rooms have joints that work harder than most: shower trays, wet-room floor edges, basins and floor-to-wall junctions. Gaps in those places let water get under the floor or behind panels, so we look at them closely. Most enquiries involve split or peeling sealant at shower trays and failed joints along IPS and cubicle panels, across kitchens and tea points, urinals and WCs and IPS panels and cubicles. Searching for sealant specialists in Kempshott? We have been sealing commercial buildings since 2005.
Around Kempshott, washroom work normally comes one building at a time. A list and photos let us quote and plan so it’s done in one visit where possible.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Place
- Kempshott (RG22, RG23)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Several jobs near Kempshott can be grouped on one trip. Mention the building’s opening times and we’ll work within them.
- We inspect each washroom and record the joints to be resealed.
- You get a fixed quote with the phasing plan.
- Old sealant is removed completely and the faces cleaned.
- Each joint is cleaned and left dry.
- A sanitary silicone bead is laid and given a smooth tooled finish.
- Each area is handed back when ready.
What we need from you
- Send your site hours and access windows
- Let building users know which areas are affected
- Agree which areas must stay open
Quotes
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Related advice
Why it’s worth doing now in Kempshott
Water gets behind panels and under floors through a failed joint. That can lead to swollen boards, marked ceilings below and lingering smells which costs more to fix than a reseal. Small buildings around Kempshott suffer from failed joints as much as large ones. Catching it early means a reseal rather than repairs.
The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why appoint us
- Specification-led, product-correct work
- Failed material removed, not covered up
- Over 20 years of commercial sealing
- Fixed quotes based on photographs, drawings or a visit
Take a look at what affects the cost and our accreditations.
Also near Kempshott
Other services in Kempshott
Do you need washroom sealing in Kempshott?
Decorators’ caulk and general sealants sometimes end up where sanitary silicone belongs. They don’t stand up to constant water, and they stain, crack or wash out.
Any of the following is a good reason to get the joints checked over:
- Complaints from staff, guests or users about tired washrooms
- Failed joints along IPS and cubicle panels
- Stained sealant around pans and urinals
- Resealing that didn’t last because the old bead stayed
For a college such as Queen Mary's College (2.4 miles east of Kempshott), half-term and summer give the windows for washroom work.
Questions to ask before you book
- How they handle RAMS and site documents
- Their approach to joint depth and backing
- The named product and why it was chosen
- The terms of the workmanship guarantee
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
How the quote is worked out
A fixed quote reflects the actual work. It takes account of:
- Access and working height
- Whether old sealant has to be cut out first
- Which sealant the job calls for
- Travel to remote or island sites
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Sending details for a quote
Good information means a firmer quote. When you get in touch, include:
- Approximate linear metres or a joint schedule
- Where the site is, with the postcode
- Anything awkward about access or site hours
- Specification clauses that apply
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, speak to us on 01277 525 020 or email a schedule or drawings.
Sanitary sealant for Kempshott buildings
Kempshott lies roughly 48 miles out from central London. Business park offices have washrooms in daily use by staff, which is why the work is phased. Two care or nursing homes sit less than 2 miles from Kempshott. In a care setting, a mouldy or lifting joint in a wet room is a hygiene issue as much as a cosmetic one. We plan the work with the manager so residents are disturbed as little as possible.
At a school such as Kempshott Junior School, changing rooms and kitchens need cleanable joints as much as the toilets. Where you are responsible for a hall attached to a building such as Saint Mark's Church, its kitchen and toilets need sealant that stays cleanable.
Kempshott is about 2 miles south-west of Basingstoke, in Hampshire. Any commercial site in Kempshott is covered. We work across 723 places in Hampshire, large and small. For work in that direction, see our Reading page (16 miles or so).
We cover the RG22 and RG23 postcode districts. Buildings on Roman Road, Aster Road and Osprey Road are within our area. Nearby places we also cover include Buckskin (1 mile north), Hatch Warren (1 mile south-east), Worting (1 mile north), Brighton Hill (1 mile east) and South Ham (2 miles north-east). Further afield, our area takes in Winchester (15 miles south-west), Fleet (13 miles east), Andover (15 miles west), Alton (10 miles south-east), Yateley (15 miles north-east) and Tadley (8 miles north).
What’s near Kempshott
We work on buildings around Brighton Hill Community School and Coppice Spring School, among other places. The nearest railway station is Basingstoke station, roughly 2.8 miles north-east. Nearby you will also find Willis Museum (2.6 miles north-east) and The Malls (2.8 miles north-east). For a walk, there’s Daneshill Park Woods and Farleigh Hill.
When something else is needed
Sealant solves a lot, but not everything, and we are upfront when that’s the case. It won’t fix:
- A room that stays damp because ventilation isn’t working
- Failed tanking beneath a wet-room floor or behind tiles
- Hollow tiles or loose panels behind the joint
Not sure which it is? You can speak to us on 01277 525 020 or use the quote form and we will tell you honestly before you book.
What we seal
- Accessible toilets and changing rooms
- IPS panels and cubicles
- Vanity units and basins
- Showers, trays and wet room floors
- Urinals and WCs
- Kitchens and tea points
Your questions answered
Can work in a care setting near Kempshott go ahead while residents are there?
Yes. We work around residents’ routines, a room or two at a time. Noise and disruption are kept to a minimum.
Can you work on a hospital site such as Basingstoke and North Hampshire Hospital?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Is old silicone taken out first?
We strip every bit of the failed bead and wipe away the residue first. It’s the difference between a joint that lasts and one that peels.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure, and sign any area that should be left alone.