The Mastic Doctor team standing beside their branded vans outside an office building
Orkney Islands · Scotland

Washroom Sealing in Gorseness

Washroom sealing in Gorseness, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.

  • Stained or open joints at kitchen sinks and worktops
  • Gaps where vanity tops meet the wall
  • Black mould inside silicone joints that cleaning can’t shift
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Signed off, with 12 months’ guarantee.
South East, London & Scotland
CHAS accredited
£5m PL insurance

Washroom sealing near Gorseness

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Our process

Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Travel to smaller Scottish places like Gorseness is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.

  1. Every room is surveyed and the failed joints listed.
  2. The fixed quote sets out the rooms, the products and the phasing.
  3. The whole of the old bead is removed.
  4. Joints are degreased and dried.
  5. A sanitary silicone bead is laid and given a smooth tooled finish.
  6. Each area is handed back when ready.

What we need from you

  • Explain the parking and delivery arrangements
  • Let us know about inductions and permits
  • Warn occupants and staff about the work

Request a quote

Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or use the quote form with what you know.

Get a price

Related advice

How we handle washroom sealing in Gorseness

In a commercial washroom, sealant is typically the first thing to wear out. Around basins, urinals, cubicles, IPS panels and shower trays it takes water, soap, cleaning chemicals and knocks every day, and once mould grows into it, it can’t be scrubbed out. The fix is to remove it completely and reseal with sanitary silicone containing anti-mould additives. If you have resealing that didn’t last because the old bead stayed and washrooms that look worn because of the sealant, we can help. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Gorseness is the same: the right product in a properly prepared joint.

Travel to smaller places like Gorseness is planned so the work is finished on one visit. Send photos and a room list and we will give a fixed quote.

Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.

Location
Gorseness (KW17)
Region
Orkney Islands
Cover
12 months on every job
Quotes
Fixed quote, scope in writing
Phone
01277 525 020
Last updated
3 November 2026
Mastic Doctor team members lined up next to their branded vans outside an office building

When to call us in Gorseness

Sometimes the sealant fails because something behind it is moving or wet: a loose panel, a leaking waste or water coming through the wall. We look for it before resealing and tell you if another trade is needed.

These are often picked up first by site or facilities staff:

  • Resealing that didn’t last because the old bead stayed
  • Gaps where vanity tops meet the wall
  • Black mould inside silicone joints that cleaning can’t shift
  • Sealant lifting along a tray edge

Church halls and community buildings, such as those at North Hackland Church, have kitchens and toilets used by many groups, and their sanitary sealant works hard.

Before you book anyone

  • How they’ll work around occupants
  • How long is the guarantee, and what does it include?
  • Who will actually carry out the work
  • Is depth set with backing rod, or bond-breaker tape in shallow joints?

How to choose a sealant contractor

Questions about Gorseness

Will all the washrooms in our Gorseness building be closed at once?

Rarely all at once: work is phased so some facilities are always available. Sanitary silicone needs time to cure before the area is used, and we’ll tell you how long for the product used.

What site paperwork comes with a job in Gorseness?

Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.

What do you charge?

Every job gets its own fixed quote. To get one, call 01277 525 020 or email us with a description of the work.

Do you do washroom sealing in healthcare settings?

We do. We work to your estates and infection-control requirements and any site permits, and phase the work so areas keep facilities.

When can showers be used after new sealant?

Each sealant has a cure time before it should get wet. Phasing is planned with the cure time in mind so facilities are never short.

Are you fully insured?

Yes. We’re fully insured, including public liability cover.

Can weather delay the job?

It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.

Wet areas in Gorseness’s workplaces

The sea is no more than about 1 mile from Gorseness, and coastal hotels, guest houses and holiday sites tend to fill up in the busy months. Washrooms used guest after guest wear their sanitary silicone faster, so resealing in the quieter months keeps rooms ready. For an island location such as Gorseness, work is planned around ferry crossings and the weather. Photos and a room list let us plan the visit around the crossings.

Washrooms near Gorseness get the old silicone stripped out and a fresh anti-mould bead on dry joints.

Gorseness is about 6 miles north of Kirkwall, in the Orkney Islands. Our applicators travel to Gorseness for work on washrooms and wet areas. Gorseness is one of 51 places in the Orkney Islands on our list for washrooms and wet areas.

Work on washrooms and wet areas is covered throughout KW17. Nearby places we also cover include Isbister (2 miles south-west), Tingwall (2 miles north-west), Norseman (2 miles south-west), Settiscarth (3 miles west) and Balfour (5 miles south-east). For island and remote sites, we plan travel and materials carefully.

Near you in Gorseness

Well-known places in the area include Langskaill House (1.7 miles north-east). Open spaces near Gorseness include Trumland RSPB reserve and Loch of Brockan.

Map of Gorseness © OpenStreetMap contributors

How the job changes by surface

IPS and cubicle panels

Swollen or delaminated boards need replacing and we’ll point out any we see.

Changing rooms and gyms

Changing rooms can be phased so one stays open. Phasing follows your site hours and access windows.

Leave it or put it right?

A tired-looking washroom doesn’t always need a refurbishment. If the finishes are in good order, replacing the sealant may do much of what’s needed for now. Renewing every failing joint on one visit is the sensible approach for a place like Gorseness. Send photos and we will quote for everything together.

The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.

Why us?

  • Colours chosen to suit frames, cladding or finishes where possible
  • One number for every site we cover
  • A Constructionline member, so easy to vet
  • Work to your specification and the manufacturer’s guidance

Read how commercial sealant jobs are priced and our accreditations.

Keeping the joints sound

After handover, these steps help:

  • Clean sealant with gentle products and a soft cloth
  • Photograph and log failed joints across the estate
  • Squeegee showers and trays after busy periods
  • Act on the first split you see at a shower tray

We hand each area back once the silicone has had the cure time the product needs. You’ll be told when showers and basins can be used again and signage stays in place until that time.

Mould in a joint spreads along the bead and into nearby grout, and complaints follow. Replacing it early keeps the job to a reseal.

Cost factors for washrooms and wet areas

The price varies from site to site. Expect it to depend on:

  • The product specified
  • Any access equipment needed
  • Travel to remote or island sites
  • Working within restricted access windows

Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.

Details that help us quote

A few photos plus some basic facts will normally do. Please tell us:

  • The asbestos register, for older buildings
  • Your programme or deadline
  • Any specification or named product
  • Where the site is, with the postcode

Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.

Accreditations

Trusted. Accredited. Insured.