Coloured Sealant in Gorseness
Sealant work in Gorseness for main contractors, managing agents and facilities managers: coloured and colour-matched sealant for visible joints, with a fixed quote first.
- Poorly tooled joints on visible finishes
- Coloured joints that have cracked with movement
- Fit-outs with a sealant colour in the specification
Coloured sealant for Gorseness sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant in Gorseness
Colour is often written into the specification, by RAL reference or by matching a sample. Standard sealant ranges cover many colours, so we check what the specified product is made in before we quote. We don’t promise an exact custom match, but we’ll show you the closest options. If you’re dealing with stained or mouldy coloured joints in washrooms and old sealant that has yellowed, darkened or faded, we can put it right, whatever the surface. Whether you call it commercial sealant work, mastic application or joint sealing, in Gorseness it comes down to the same thing: the right product in a properly prepared joint.
Around smaller places such as Gorseness, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Their kitchens, washrooms and window perimeters all need joints that keep water out.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Gorseness (KW17)
- Region
- Orkney Islands
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
When something else is needed
Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is any of the following:
- Custom-mixed sealant colours
- Stopping sealant from ever changing colour outdoors
- Materials with mixed tones that defy a single match
If you’re not sure, just give us a call on 01277 525 020 or send photos by email and we will give you a straight answer before you book.
Joints and surfaces we work on
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Office fit-out finishes
- Cladding panels
- Natural stone and brick
- Shop-fit joinery and counters
Why it’s worth doing now in Gorseness
Standard white or grey sealant is cheaper to stock, but it doesn’t always suit the finish. Where joints are on show, choosing a better colour is normally worth it in how the finished space looks. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why us?
- CHAS accredited contractor
- Work carried out by CSCS-carded applicators
- Joints cleaned back to sound surfaces
- Work to your specification and the manufacturer’s guidance
Read what affects the cost and how we’re accredited.
Frontages, fit-outs and joints in Gorseness
Gorseness sits close to the coast, within about 1 mile. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. A matched colour is only half the brief on an exposed frontage. Being on an island, Gorseness means planning around ferry times as well as the weather. A complete list with photographs means one crossing, not two.
A lasting commercial joint around Gorseness begins with the old bead fully out and the faces clean and dry. Where a joint is on show in Gorseness, we will check which shades the product offers before work starts.
Gorseness is about 6 miles north of Kirkwall, in the Orkney Islands. Businesses, contractors and managing agents in Gorseness use us for work on colour-matched joints. Gorseness is one of 51 places in the Orkney Islands on our list.
Business premises anywhere in KW17 are within our area. Close to Gorseness, our area also takes in Isbister (2 miles south-west), Tingwall (2 miles north-west), Norseman (2 miles south-west), Settiscarth (3 miles west) and Balfour (5 miles south-east). For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Landmarks near Gorseness
A little further out are Langskaill House (1.7 miles north-east). Not far away are Trumland RSPB reserve and Loch of Brockan.
Quoting for work in Gorseness
Before we quote, we look at:
- Phasing around occupants
- Location, for remote and island sites
- The site’s rules and procedures
- The total length or number of joints
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
What to include in your enquiry
However big the job, these details speed things up:
- The asbestos register, for older buildings
- Any specification or named product
- Your programme or deadline
- The postcode of the building
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Questions we’re asked in Gorseness
Does a coastal location like Gorseness affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Can you take on a job in Gorseness, on the island?
Yes. Islands are part of our area, Gorseness included. Island work is planned around ferry crossings and the weather, so photos and a full list before we travel are essential.
What happens if old sealant might contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Will sunlight affect the sealant colour?
Some change over time is normal. Exposure, product and colour all play a part, and we can’t promise a colour that never alters.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Our process
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself usually taking a day for a modest shop fit, and longer for a full building or several floors. Tell us who will meet us and how to get in at your building near Gorseness. That goes into the plan alongside the quote.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- We prepare each joint, prime where needed and fit backing.
- The agreed colour is installed and tooled neatly.
Getting the site ready
- Arrange parking or a loading space
- For older buildings, check the asbestos register before work
- Point out any areas we must not close
Ask for a quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Related advice
Also in Gorseness
Site staff or a sealant specialist?
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Different surfaces, different methods
Shop-fit and joinery finishes
Shop fits bring laminate, timber, metal and stone together, each with its own colour. Each joint gets a colour that suits the materials it sits between from the product’s range.
Brick and masonry
Vertical movement joints run the full height of many brick walls. The right colour keeps them discreet without affecting the joint’s performance.