Greater London · England
Commercial sealant contractors in KT9
Commercial sealant, construction mastic and joint sealing across KT9, covering Chessington, Hook and Barwell, with a fixed quote before we start.
Need sealant work in KT9?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Where we work in KT9
Services in KT9
- Expansion and movement joint sealing
- Facade and window perimeter sealing
- Construction and new-build mastic
- Commercial washroom and wet-area sealing
- Industrial and floor joint sealing
- Mastic sealing for building owners and managing agents
- Commercial sealant contractors
- Fire-rated sealing and fire stopping
- Coloured and colour-matched sealant
- Every service
Tell us what needs doing and your postcode for a fixed quote: give us a call on 01277 525 020 or send details through our quote form.
About commercial sealant contractors in KT9
A reseal stands or falls on the preparation underneath it. Old silicone gives new sealant nothing to grip, so every trace of it is removed, then both faces are cleaned back to sound, dry material with no dust or grease on them. Primer is used wherever the manufacturer calls for it on that surface and the joint depth is controlled with backing rod. We work on movement joints in walls and floors, window and door perimeters and kitchen worktops and splashbacks, and the failures we are asked to look at most are messy, uneven beads from earlier work that let the building down and weathered facade sealant that no longer flexes.
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself normally taking anything from part of a day on a short run of joints to several weeks on a large phased package.
- Send details through our quote form, or ask for a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Where parts of the building must stay open, the work is phased.
- Every failed bead is removed rather than covered.
- Each joint gets a suitable sealant, laid to depth and tooled.
- We check the work with you, and the 12-month guarantee starts.
What you’ll pay
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why appoint us
- Commercial sealant work since 2005
- A fixed quote before work starts
- Workmanship guaranteed for 12 months
- Old sealant cut out, never sealed over
Get a fixed quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. For a chat about it beforehand, phone 01277 525 020 or email the details over.
Around Chessington
Recent enquiries here include premises near Chessington Community College, Church of St Mary the Virgin and Castle Hill Primary School, among other places. Nearby too are Horton Country Park (0.8 miles south-east) and Shrewsbury House School (1.2 miles north). There’s a railway station in Chessington itself: Chessington North station. Well-known places in the area include Tolworth Hospital (1.2 miles north-east) and Chessington Castle Hill (0.5 miles south-east). The countryside around Chessington includes Kingston Hill Road area and Bonesgate Open Space.
Where commercial joints are in KT9
The commercial stock in KT9 mixes older town-centre buildings with newer offices and units, in places such as Chessington, Hook and Ditton Hill and beyond. Each building needs the right product for its surfaces, from stone and brick to coated aluminium and laminate.
We work across Greater London and the South East counties, and every job in KT9 starts with access, parking and site rules.
Chessington: In a retail centre such as The Ashley Centre, which lies south-east of Chessington, new tenants mean new shop fits, and the sealant at counters, frontages and floor edges is part of the finish. For a hotel such as Chessington Safari Hotel (1.1 miles south-west of Chessington), the colour of a joint at the bar or the bath matters to the look of the room.
When something else is needed
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Leaks from pipework, wastes or valves (that’s plumbing)
- Removing asbestos-containing materials (a licensed or specialist contractor’s job)
- Misted, cracked or failed glazing units (a glazier’s job)
How the quote is worked out
A fixed quote reflects the actual work. It takes account of:
- Travel to remote or island sites
- Backing rod, priming and other preparation
- Whether old sealant has to be cut out first
- Induction, permit and paperwork requirements
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote and we’ll price your job on its own details.
What to include in your enquiry
A good diagnosis starts with the right details. Tell us:
- Your programme or deadline
- Clear photographs of the problem areas
- Where the site is, with the postcode
- Specification clauses that apply
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Keeping the joints sound
Once the work is signed off, a little attention goes a long way:
- Look at the sealant around anything that has been moved or replaced
- Put external and wet-area joints on a regular inspection round
- Act on the first lifting edges rather than waiting
- Have extract fans checked so wet areas dry out
Our workmanship on each job is backed by a 12-month guarantee. Keep the handover details with your O&M or maintenance records so it’s easy to find if a joint we sealed gives trouble inside the 12 months.
Occupiers often notice failing sealant before the facilities team does, and in a hotel, office or shop it makes the whole space look neglected. Planned replacement saves fielding the same complaint again and again.
What we’re called out for in KT9
External sealant takes a steady beating from the weather. Sunny elevations dry the surface out and exposed ones take driving rain; in time the surface chalks, hardens and cracks. A hardened bead can’t follow the building any more.
It’s worth sending us details if you spot any of the following:
- Untidy joints in a reception, shop floor or lobby
- Movement joints packed with grit and debris
- Leaks that seem to come through a sealant line
- Frame sealant that has cracked, shrunk or pulled away
Different surfaces, different methods
Movement joints in walls and floors
Brickwork, blockwork and floor slabs all have movement joints that need a flexible seal. When the seal fails, debris gets in and the joint stops working. The joints are resealed using a sealant matched to the movement and any traffic.
Shop fronts and retail fit-outs
Retail work typically has to fit around trading. Tell us your trading hours and access windows and we’ll plan around them.
KT9: questions and answers
What do you need from us to quote?
Price depends on joint lengths and widths, how much removal is involved, the product, access and phasing. To get a fixed price, send details through our quote form, or phone or email us.
How many days will you need on site?
It depends on the scope, though a typical visit usually takes a few hours to several days on most single sites, depending on joint lengths and access. For bigger or phased jobs, we will set out a timescale with the quote.
What about asbestos in old mastic?
In buildings from before 2000 in particular, some old mastics and sealants may contain asbestos. Before cutting anything out, we ask for the asbestos register or survey, and if something is suspected, work stops until it’s tested.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and we will price the work to it.
Do you work for facilities managers and managing agents?
Yes. You send the details, we return a fixed quote, and the job is done and signed off.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.