Greater London · England
Commercial sealant contractors in KT6
Commercial sealant, construction mastic and joint sealing across KT6, from Surbiton, Seething Wells and Surbiton Park, with a fixed quote before we start.
Sealant contractors for KT6
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Where we work in KT6
Our services across KT6
- Commercial sealant contractors
- Commercial washroom and wet-area sealing
- Construction and new-build mastic
- Fire-rated sealing and fire stopping
- Mastic sealing for building owners and managing agents
- Coloured and colour-matched sealant
- Expansion and movement joint sealing
- Industrial and floor joint sealing
- Facade and window perimeter sealing
- All services
Let us know the job and your postcode for a fixed quote: call 01277 525 020 or send details through our quote form.
About commercial sealant contractors in KT6
Pricing a commercial reseal is a short process. Our quote form takes photographs, drawings or a schedule of the areas. Where the photographs don’t tell the full story, we arrange a site visit. The enquiries we see most involve water staining near frames, panels or ceilings and frame mastic that has hardened and come away from the wall, on movement joints in walls and floors, washrooms and tea points and floor and threshold joints.
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off.
- First, details reach us through the quote form or a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Work is phased around your occupiers where areas need to stay in use.
- Every failed bead is removed rather than covered.
- A suitable product for each joint goes in at the right depth and is tooled.
- A final walk-round, then the 12-month guarantee applies.
How we quote
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
Why appoint us
- 12-month guarantee on workmanship
- CHAS accredited contractor
- Old sealant cut out, never sealed over
- One phone line for London, the South East and Scotland
Get a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call 01277 525 020 or email drawings and photos.
Near you in Surbiton
We work on buildings around Coronation Hall pub, The Hollyfield School and Sixth Form Centre and Lime Tree Primary School, among other places. Nearby too are Stokes Field (1.4 miles south-west), Shrewsbury House School (0.8 miles south) and St Mark's Church (less than half a mile north). Surbiton has its own railway station: Surbiton station. Other landmarks nearby include Tolworth Hospital (1 mile south-east) and Metropolitan Police Mounted Branch Museum (2.2 miles west). The countryside around Surbiton includes The Wood and The Lake.
Commercial premises across KT6
Across KT6, from Surbiton, Chessington and Seething Wells to the smaller places between, commercial buildings run from high-street shops and offices to hotels, schools and business parks. Because we cover all of it, multi-site occupiers can bring every building under one quote, with colours matched site to site where the brand needs it.
We work across Greater London and the South East counties, so jobs in KT6 are planned with access, loading and parking in mind.
Surbiton: Premises within reach of Surbiton station (to the west of Surbiton) often have busy frontages where joints are seen by everyone passing. In hotels such as Bosco Hotel & Lounge, under half a mile to the north-west of Surbiton, refurbishments usually mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes.
What we’re called out for in KT6
No sealant joint is permanent. How long one lasts depends on the movement it takes, its exposure to sun and weather, the cleaning regime, the traffic and the product itself. On a busy commercial site several of those pile up at once, which is why regular inspection pays.
Things that normally lead to an enquiry:
- Layers of sealant, all of them failing
- Greasy, split joints in a kitchen or tea point
- Movement joints packed with grit and debris
- Messy, uneven beads from earlier work that let the building down
What sealant work can’t fix
Honesty saves time and money. New sealant won’t cure:
- Structural cracks or movement the joints weren’t designed for
- Faulty windows rather than failed perimeter sealant
- Roof leaks that only look like a joint problem
Looking after the joints
Problems stay small when the joints are checked regularly. In particular:
- Act on the first lifting edges rather than waiting
- Respect the cure time before reopening an area
- On pre-2000 buildings, share the asbestos information before work starts
- Keep washroom and kitchen extraction working
Give fresh sealant time to cure before it’s cleaned, wetted or walked past. Cure time varies with the product, conditions and depth of the joint, and we confirm it when each area is handed back. Leaving the area closed until then keeps the bead neat.
Sealant installed at the same time typically fails in sequence. A few splits this year typically mean more next year. We can assess the lot and suggest what to do now and later.
Doing it in-house
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.
How the job changes by surface
Commercial kitchens and tea points
A smooth, continuous joint is easier to keep clean, which matters when environmental health officers look at a kitchen. We seal to a neat, cleanable finish and work around service times you agree with us.
Shop fronts and retail fit-outs
Shop fits put sealant right in front of customers. Counters, display units, shopfront frames and floor trims all need a neat line. We will confirm the colours available for the specified product.
Common questions from KT6 clients
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.
What site paperwork can you provide?
The paperwork is agreed with the quote: most clients ask for RAMS, our insurance certificate and CSCS details. Every applicator holds a CSCS card.
How long does a typical visit take?
It depends on the scope, though a typical visit typically takes a few hours to several days on most single sites, depending on joint lengths and access. For bigger or phased jobs, we’ll set out a timescale with the quote.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Will the building have to shut during the work?
Most of the buildings we work in stay occupied. Only the area being sealed is closed, and the sequence is agreed in advance.
Do you check for asbestos before removing sealant?
It’s possible in older buildings, especially those built before 2000. We ask to see the asbestos register or survey before disturbing old sealant, and anything suspect is left until it has been tested.
Can one contractor look after sealant on all our buildings?
Yes, within the areas we cover: South East England, Greater London and Scotland. Each site gets the same process and a single contact.