Surrey · England
Commercial sealant contractors in KT22
We cover every part of the KT22 postcode district, which takes in Leatherhead, Fetcham and Oxshott. Failed sealant is always cut out completely, with a 12-month guarantee.
Need sealant work in KT22?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Where we work in KT22
What we do in KT22
- Facade and window perimeter sealing
- Commercial sealant contractors
- Mastic sealing for building owners and managing agents
- Construction and new-build mastic
- Coloured and colour-matched sealant
- Commercial washroom and wet-area sealing
- Fire-rated sealing and fire stopping
- Industrial and floor joint sealing
- Expansion and movement joint sealing
- All services
Tell us what needs doing and your postcode and we’ll come back with a price: ring 01277 525 020 or email drawings and photos.
Postcodes nearby
Elsewhere in Surrey
Every town in Surrey
Areas we cover
How commercial sealant contractors works in KT22
If you look after more than one building, a single sealant contractor saves a lot of chasing. Single jobs, multi-site packages and planned programmes all come to us, run the same way on every site: details in, a fixed quote back, the sealing done, then our 12-month guarantee. For sites in KT22, the quickest start is to ring 01277 525 020 or email drawings and photos with a list of addresses. We work on kitchen worktops and splashbacks, external facade joints and movement joints in walls and floors, and the failures we’re asked to look at most are hardened, chalky sealant on south-facing or exposed elevations and smeared sealant across finishes from a rushed job.
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it.
- We start with the evidence: photographs, drawings or a look on site.
- A fixed quote follows, with removal and preparation included.
- Sequence, access and working times are settled before the first joint is touched.
- The failed sealant comes out and the faces are prepared, with primer where required.
- Backing goes in, the new sealant is laid and tooled, and the area is left neat.
- Completed areas are signed off with you under our 12-month guarantee.
What you’ll pay
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What you get with us
- RAL and finish matching where the product range allows
- Standard and matched colours in many product ranges
- CHAS accredited contractor
- Products installed to the manufacturer’s instructions
Request a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or send photos by email.
What’s near Leatherhead
Around Leatherhead, our work takes us to commercial buildings near St Andrew's Catholic School, Duke's Head Public House and River Mole LNR. You will also find Leatherhead Trinity School and Children's Centre (less than half a mile north), St Andrew's Catholic School (0.6 miles north-east) and Church of Our Lady and St Peter (less than half a mile north-east). There’s a railway station in Leatherhead itself: Leatherhead station. Nearby you’ll also find Walton on the Hill (3.5 miles east) and Headley Court (2.2 miles east). Not far away are Claremont Lake and Jubilee Wood.
Where commercial joints are in KT22
Shop fits, office refurbishments and hotel refits in towns such as Leatherhead, Ashtead and Great Bookham all leave joints that need sealing. Visible joints call for a matched colour and a clean tooled finish.
Around the motorway corridors of the South East, business parks and industrial estates are common, and KT22 is part of the area we cover.
Leatherhead: Sites a few miles apart, such as Leatherhead Industrial Estate and Mole Business Park, can share one programme and one point of contact. Premises within reach of Leatherhead station, under half a mile north-west of Leatherhead, often have busy frontages where joints are seen by everyone passing.
Signs you need commercial sealant contractors
Outside, sunlight and rain wear sealant down year after year. Sunny elevations dry the surface out and exposed ones take driving rain, so beads chalk, stiffen and lose their stretch. A hardened bead can’t follow the building any more.
Look out for the following:
- Expansion joints with the sealant torn out
- Weathered facade sealant that no longer flexes
- Gaps behind commercial kitchen worktops and sinks
- Leaks that seem to come through a sealant line
Site staff or a sealant specialist?
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Keeping the joints sound
Problems stay small when the joints are checked regularly. In particular:
- Act on the first lifting edges rather than waiting
- On pre-2000 buildings, share the asbestos information before work starts
- Look at the sealant around anything that has been moved or replaced
- Put external and wet-area joints on a regular inspection round
Keep an eye out for other trades after we have gone. When fittings are moved or cabling added, the sealant nearby is easily disturbed, and it’s easy to forget to reseal afterwards. If that happens, speak to us on 01277 525 020 or email a schedule or drawings and we will price putting it right.
Sealant installed at the same time usually fails in sequence. A few splits this year normally mean more next year, so it makes sense to look at the wider elevation or block. We can assess the lot and suggest what to do now and later.
Surface by surface
Fire-rated seals where specified
Intumescent and other fire-rated sealants go in at service penetrations and linear gaps to the maker’s tested details, where they are specified. Fire-stopping design and sign-off sit with the designer, fire engineer or building control.
Movement joints in walls and floors
A trafficked floor joint needs a different product from a wall joint. We’ll recommend the right filler or sealant for the traffic and movement, and tell you if the edges need repairing first.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Old mastic that tests positive for asbestos
- Structural cracks or movement the joints weren’t designed for
- Misted, cracked or failed glazing units (a glazier’s job)
Questions we’re asked in KT22
Can you handle sealant work across several sites?
Yes. We regularly take on multi-site work and planned maintenance programmes, quoted per building or as a package.
What site paperwork can you provide?
The paperwork is agreed with the quote: most clients ask for RAMS, our insurance certificate and CSCS details. Our applicators are CSCS-carded.
Do you cover KT22?
Yes. We take on work across KT22.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Do you work for facilities managers and managing agents?
Yes. FMs, managing agents and landlords are among our regular clients, alongside main contractors. We can work to your instruction process and site rules.
How do you keep disruption to occupiers down?
It’s normal for us to work in occupied buildings. Only the area being sealed is closed, and the sequence is agreed in advance for as long as the cure needs.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.