Fire-rated sealing and fire stopping in Leatherhead, Surrey
Fire stopping for Leatherhead, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Fire sealant pulled out of the opening
- Penetration schedules that need working through
- Unsealed joints where partitions meet the slab
Fire stopping in Leatherhead
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Diagnose, treat, sign off
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For a town like Leatherhead, we try to group jobs for the same client into one visit, with one quote covering them. Tell us when the building is open and we will plan to suit.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Agree which areas must stay open
- Arrange parking or a loading space
- Move anything stored against the joints
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or send details through our quote form.
Related advice
Fire stopping in Leatherhead, done properly
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail. We work on joints between fire-resisting walls and floors, cable penetrations and service gaps in risers, and the failures we are asked to look at most are unsealed openings around new pipes and cables and unsealed joints where partitions meet the slab. Facilities teams, main contractors and managing agents in Leatherhead tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Older buildings in towns like Leatherhead have often been rewired and replumbed several times, and each change can leave unsealed holes in walls and floors. Intumescent or fire-rated sealant is used wherever the specification asks for it, built up exactly as tested.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Place
- Leatherhead (KT22)
- Region
- Surrey
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Where services cross fire walls in Leatherhead
Central London is about 17 miles from Leatherhead. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls, and the gaps need sealing with the specified product. For England, the fire stopping of penetrations is dealt with in Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
In a building such as Church of Our Lady and St Peter, any service penetration through a fire-resisting wall should be sealed to the specified detail. Industrial units on estates such as Leatherhead Industrial Estate (less than half a mile west of Leatherhead) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. On a hospital site such as Leatherhead Community Hospital, less than half a mile to the east of Leatherhead, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Leatherhead is about 4 miles south-west of Epsom, in Surrey. Anywhere in KT22, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Leatherhead is one of 379 places in Surrey on our list for service penetrations. Our London page has more on work in that area, about 17 miles away.
If you need fire stopping in KT22, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on High Street, Church Road and Station Road. Leatherhead sits on or close to the A24 and A245. We also cover Fetcham (1 mile west), Mickleham (2 miles south), Great Bookham (2 miles south-west), Westhumble (3 miles south) and Little Bookham (3 miles south-west) for service penetrations. A short drive away, we cover Guildford (11 miles west), Woking (11 miles west), Epsom (4 miles north-east), Horley (11 miles south-east), Redhill (8 miles south-east) and Ewell (5 miles north-east).
Landmarks near Leatherhead
Around Leatherhead, our work takes us to commercial buildings near St Andrew's Catholic School, St Andrew's Catholic School and Duke's Head Public House, among other places. Leatherhead has its own railway station: Leatherhead station. A little further out are Walton on the Hill (3.5 miles east) and Headley Court (2.2 miles east). Not far away are Claremont Lake and Jubilee Wood.
What affects the price in Leatherhead
Each job is priced on its own details. The things that drive the figure:
- Phasing around occupants
- How much existing material needs removing
- Joint width, depth and condition
- How accessible the joints are
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Send us:
- How the joints are reached, and at what height
- The site address and postcode
- Clear photographs of the problem areas
- Your programme or deadline
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. To get it moving, call 01277 525 020 or email the details over.
Maintenance after handover
A few simple habits keep the new joints working:
- Settle who seals which penetrations at the start of a project
- Have penetrations checked while they can still be seen
- Include service cupboards in routine inspections
- Ask which product is in place before decorating
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
Leave it or put it right?
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. A failed joint is easier to put right before damp shows inside. After a leak, there’s drying, repairs and redecoration on top.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Why appoint us
- 12 months’ guarantee on every job
- Work to your specification and the manufacturer’s guidance
- Joints cleaned back to sound surfaces
- One phone line for London, the South East and Scotland
Take a look at our cost guide and how we’re accredited.
Places near Leatherhead
Other services in Leatherhead
Work for main contractors and building owners
For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
Honest limits
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Walls or floors that aren’t fire-resisting to begin with
- Plastic pipes whose detail calls for a collar or wrap
- Issuing fire ratings or certificates for seals
Not sure which it is? You can give us a call on 01277 525 020 or email us and we will tell you honestly.
Where we work in Leatherhead
- Linear gaps at wall heads
- Pipe penetrations
- Cable penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
Questions about Leatherhead
Do you take on work at healthcare sites like Leatherhead Community Hospital?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can work at a site such as University for the Creative Arts fit around teaching?
Yes. Tell us the term dates, vacation periods and access windows, and we will plan the work around them. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Which sealant will you use?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Do the same rules apply to fire stopping in Scotland?
Building standards in Scotland are separate from England’s, and England uses Approved Document B. Wherever the site is, our work follows the specification and the tested detail.
Will you come and look before quoting?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
Do you seal on top of existing sealant?
No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.