Memsie mastic sealing
Mastic sealing for Memsie, from a contractor working since 2005. Fully insured and CHAS accredited.
- Brittle perimeter mastic across a building
- Open joints in brickwork or panels
- Worn sealant at communal door frames
Mastic sealing for Memsie sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle mastic sealing in Memsie
Most buildings come with mastic joints nobody has looked at since handover and it slowly wears out: window perimeters, door frames, external joints and communal junctions all rely on it. Once it cracks, hardens or comes away, draughts and water find a way in, and occupiers start reporting it. If you are dealing with damaged joints in communal entrances and corridors and open joints in brickwork or panels, we can put it right. Looking for mastic applicators who cover Memsie? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
Outside mastic in Scotland needs dry joints and the right temperature, so work around Memsie is planned with the forecast. Programmes allow for the weather.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Place
- Memsie (AB43)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Asbestos-containing sealant, which we don’t remove
- Broken glass or failed sealed units
- Failed window or door frames, which need a window contractor
If you are not sure, just phone 01277 525 020 or email a schedule or drawings and we will give you a straight answer.
Where we work in Memsie
- External wall and movement joints
- Shopfronts below residential blocks
- Window and door perimeters on blocks
- Communal kitchens and washrooms
- Communal entrances and stairwells
- Balcony and threshold joints
Leave it or put it right?
Dealing with failed joints one report at a time is slow and scattered. Planned resealing covers a whole building or estate in one go and is simpler to manage and budget. Around smaller places like Memsie, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
Why clients in Memsie choose us
- Fully insured, including public liability cover
- Old sealant cut out, never sealed over
- CSCS-carded applicators
- Over 20 years of commercial sealing
Take a look at how commercial sealant jobs are priced or our accreditations.
Towns and villages near Memsie
Other services in Memsie
Building owners, agents and FMs in Memsie
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Memsie: questions and answers
Will you price a mastic programme across our Memsie portfolio?
Yes. Planned programmes across a building, block or estate are a core part of this service. Residents are given notice through you, and the work moves building by building.
Is Memsie off your patch?
Not at all. Memsie is within our area. We cover the whole of Scotland. Where we can, we group nearby jobs to make the most of each trip.
How long does a job like this take?
The duration is planned around your programme and the access we are given. We will give you an estimate of time on site when we quote.
What guarantee do you give on resealing?
A 12-month guarantee covers our work. It applies to our workmanship rather than damage or problems with the frames.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Will residents or tenants be disturbed?
Residents and tenants carry on as normal. If any flats or units need access, we will tell you in advance so you can arrange it with occupiers.
Does weather matter for sealant work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Mastic sealing in Memsie: the local picture
Memsie is in the east of Scotland, which is drier than the west. External mastic still needs a dry joint and the right temperature, and winter mornings can be frosty. Block programmes are built with that in mind
For owners of several units at places like Kessock Road Industrial Estate, 2.7 miles north-east of Memsie, one programme can deal with frame and external mastic across the lot.
Memsie is about 3 miles south-west of Fraserburgh, in Aberdeenshire. If you’re looking for mastic sealing in Memsie, we can help, as we do across Aberdeenshire. Our Aberdeenshire coverage takes in 179 places, from busy centres to rural villages. For work in that direction, see our Aberdeen page.
We take on mastic joints across the AB43 postcode area. Among the streets we cover are Cairn Close, Westcroft Close and Muir Road. Close to Memsie, our area also takes in Fraserburgh (3 miles north-east), Sandhaven (3 miles north), Broadsea (3 miles north), Pittulie (3 miles north) and Rosehearty (4 miles north-west). Further afield, our area takes in Peterhead (14 miles south-east), Roanheads (14 miles south-east), Clerkhill (14 miles south-east), Port Henry (14 miles south-east), Mintlaw (9 miles south) and Longside (10 miles south-east).
Local landmarks in Memsie
Nearby you will also find Fraserburgh Heritage Centre (3.4 miles north-east) and Fraserburgh Hospital (2.7 miles north-east). For a walk, there’s Mormond Hill.
When to call us in Memsie
Much failed sealant was laid on dirty, dusty or damp surfaces. Without clean, sound faces and a primer where the product needs one it comes away from one face.
Most enquiries start with one or more of the following:
- Draughts at frames across a block
- Old repairs sealed over failed mastic
- Open joints in brickwork or panels
- Repeated reactive repairs to the same buildings
Around Memsie, a planned programme renews failed mastic across a building or estate in one go.
Comparing quotes
- Can the work be phased to keep areas open?
- How they handle RAMS and site documents
- How the existing material will be dealt with
- Are they CHAS accredited or on Constructionline?
From enquiry to sign-off
We follow your site rules from the start: signing in, inductions and any permit to work. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact. Where we can, we combine work around Memsie with other jobs nearby. Tell us how flexible your dates are.
- We inspect each building and record the joints that have failed.
- The quote is fixed and split as suits you.
- Dates and areas are agreed so occupiers can be told.
- Old mastic is removed and the joint faces prepared.
- Joints are resealed and tooled.
- Each building is checked and signed off with the 12-month guarantee.
Before we start on site
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we’ll be in
- Share the asbestos register for older buildings
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Read more
What sets the cost
The price varies from site to site. It mainly depends on:
- The product specified
- Working within restricted access windows
- Backing rod, priming and other preparation
- Access and working height
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
What to include in your enquiry
The more we know, the firmer the quote. When you get in touch, include:
- Drawings or a marked-up plan, if available
- The product your specification calls for
- Your programme or deadline
- Anything awkward about access or site hours
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, call 01277 525 020 or use the quote form.