
Coloured and colour-matched sealant in Memsie, Aberdeenshire
Coloured and colour-matched sealant for visible joints in Memsie. CHAS accredited and fully insured, with a 12-month guarantee.
- Discoloured joints on a visible elevation
- Colour changes after a rebrand or refit
- Smeared sealant on stone or joinery
Coloured sealant near Memsie
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Building owners, agents and FMs in Memsie
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Memsie. One quote can cover more than one site, so there’s one set of paperwork to deal with.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Memsie can form part of a wider programme across Aberdeenshire.
About our coloured sealant in Memsie
On a finished interior or a high-quality elevation, the sealant is part of the look. Our coloured sealant work blends joints into the surrounding materials, from powder-coated frames to stone and brick, for clients in Memsie. Performance decides the product; the colour is chosen from that product’s range. Most enquiries involve patch repairs in several different colours and failed coloured sealant that has split or peeled, across cladding panels, office fit-out finishes and shop-fit joinery and counters. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Memsie it comes down to the same thing: the right product in a properly prepared joint.
Travel to smaller places such as Memsie is planned so the whole job is finished in one visit where possible, so it helps to have photographs and a full list first. If neighbouring businesses have work too, the visits can be grouped.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.

- Location
- Memsie (AB43)
- Region
- Aberdeenshire
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Quoting for work in Memsie
We price every job individually. The things that drive the figure:
- Specialist products, such as fire-rated or hygienic sealants
- Distance, for remote addresses
- Whether the work must be split into stages
- Any access equipment needed
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
What we need to price the job
We can often quote from photos and a few details. It helps to include:
- The product your specification calls for
- What the building is and how it’s used
- Your programme or deadline
- How the joints are reached, and at what height
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or email us.
Why deal with it now?
It’s far cheaper to approve a sample than to strip and redo a full run. A short trial bead costs very little. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Memsie, a repair visit takes planning, so it’s better to act early.
Pricing colour-matched joints depends on how many there are, their condition and the access, plus any specification you are working to. Call for a quote.
What you get with us
- One contact handling all your sites
- Failed material removed, not covered up
- CHAS accredited
- Colour agreed before work starts
Read what affects the cost and our accreditations and insurance.
On site: what to expect
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, and the work usually takes a day for a modest shop fit, and longer for a full building or several floors. Travel to smaller Scottish places like Memsie is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- We confirm the product the joint needs before talking about colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We take out the existing bead, clean the joints and fit backing.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
Preparing the site
- Tell us what induction or permit system the site runs
- Confirm the product named in the specification
- Tell us which areas need to stay in use
Getting a fixed quote
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. If you have questions first, call the office on 01277 525 020 or send photos by email.
Advice
Do you need coloured sealant in Memsie?
Exposure takes its toll on colour. UV, grime and weathering alter how a bead looks after a few years, so joints that once matched no longer do. A reseal brings the colour back in line.
Clients typically get in touch after noticing something like this:
- Old colour-matched joints lifting at the edges
- Sealant that no longer suits recoated frames
- Dirty, discoloured joints in public areas
- Hotel refurbishments with a set colour scheme
A unit on an estate like Kessock Road Industrial Estate, 2.7 miles to the north-east of Memsie, normally has an office front, a trade counter and staff facilities with joints of their own.
Questions to ask before you book
- What the guarantee covers, and for how long
- What level of public liability insurance do they hold?
- How they handle RAMS and site documents
- How they’ll work around occupants
How the job changes by surface
Paintable sealants
Where no colour in the range is close, a paintable hybrid or PU sealant can sometimes be painted to match. It depends on movement and the specification, as paint can crack on a moving joint.
Office fit-outs
Partition frames and joinery are often in a set colour. We choose sealant colours to suit.
Your questions answered
Will you take on work at estates like Kessock Road Industrial Estate, close to Memsie?
Yes. Our area takes in Memsie and its surroundings, with estates and business parks such as Kessock Road Industrial Estate included. To start, just ring 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.
Can you supply sealant in our brand colour for a site in Memsie?
Yes, we can usually get close to most finishes from the product’s colour range. Send colour references or photographs and we’ll confirm what’s available for the product.
How much does the work cost?
We don’t publish prices, as every site differs. Send photographs or drawings and we will price it at a fixed figure.
Do you need to see the site first?
That depends on the size and complexity of the job. Straightforward work can often be priced from photographs and measurements, and bigger or more complex jobs usually get a visit.
Can you work to our specification?
Yes. Send it with your enquiry, and we will price the work to it, flagging anything that needs clarifying.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Are you insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Also near Memsie
Other services in Memsie
What Memsie’s businesses ask us to seal
Memsie is in the east of Scotland, which is drier than the west. Winter frost and damp frames still stop outside sealing on some days. In winter, outside joints are timed for when surfaces are dry and within the product’s range
For a hotel such as Heath Hill Hotel, 0.5 miles to the north-west of Memsie, the colour of a joint at the bar or the bath matters to the look of the room.
Memsie is about 3 miles south-west of Fraserburgh, in Aberdeenshire. Commercial clients in Memsie use us for work on colour-matched joints. Our Aberdeenshire coverage takes in 179 places, from busy centres to rural villages. We also cover Aberdeen, around 35 miles from Memsie.
Postcode districts covered here: AB43. Among the streets we cover are Cairn Close, Westcroft Close and Muir Road, and sites on any of them can send details for a fixed quote. Sites close to Memsie are covered too, including Fraserburgh (3 miles north-east), Sandhaven (3 miles north), Broadsea (3 miles north), Pittulie (3 miles north) and Rosehearty (4 miles north-west). Bigger towns within reach include Peterhead (14 miles south-east), Roanheads (14 miles south-east), Clerkhill (14 miles south-east), Port Henry (14 miles south-east), Mintlaw (9 miles south) and Longside (10 miles south-east).
Around Memsie
Nearby you’ll also find Fraserburgh Heritage Centre (3.4 miles north-east) and Fraserburgh Hospital (2.7 miles north-east). Open spaces near Memsie include Mormond Hill.