Sealant applicators in Memsie
Sealant work for offices, shops, hotels and other commercial buildings across Memsie, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Messy, uneven beads from earlier work that let the building down
- Frame mastic that has hardened and come away from the wall
- Greasy, split joints in a kitchen or tea point
Commercial sealant contractors near Memsie
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When to call us in Memsie
If only one face has lost its grip, that’s an adhesion failure. Typical reasons include rushed preparation, no primer where one was needed, dust or release agents on the surface, or three-sided adhesion. We see it often where joints were sealed in a hurry.
Common reasons buildings call us in:
- Layers of sealant, all of them failing
- Hardened, chalky sealant on south-facing or exposed elevations
- Damp patches where an external joint has failed
- Black mould through washroom sealant that won’t clean off
If you run a unit on an estate such as Kessock Road Industrial Estate (2.7 miles north-east of Memsie), the trade counter, offices and staff facilities have joints to look after as well as the warehouse.
Questions to ask before you book
- Do they follow the manufacturer’s priming guidance?
- Is the sealant right for the movement and the substrate?
- Who will actually carry out the work
- What site paperwork they can supply
Commercial sealant contractors for commercial buildings in Memsie
How long a joint lasts is decided before any sealant leaves the gun. Silicone has no grip on cured silicone, so the failed bead is cut out completely and the faces are cleaned until they’re sound and dry, with no dust or grease left. Primer is used wherever the manufacturer calls for it on that surface, and a backing rod limits the depth to give the sealant room to work. If you’re dealing with weathered facade sealant that no longer flexes and smeared sealant across finishes from a rushed job, we can help, on external facade joints, kitchen worktops and splashbacks and window and door perimeters alike. Facilities teams, main contractors and managing agents in Memsie tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
The most common commercial job in Memsie is resealing joints that have simply reached the end of their life: hardened, cracked or shrunk away from the faces, and letting water or dirt in.
Around smaller places such as Memsie, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Each has kitchens, washrooms and frames that depend on sound joints.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Where
- Memsie (AB43)
- Region
- Aberdeenshire
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Why it’s worth doing now in Memsie
Some low prices are low because nothing gets cut out. Sealing over looks tidy at handover, then lifts once the joint starts moving. Our prices always include removal of the failed bead and full joint preparation, which is where the lasting value is. Renewing every failing joint on one visit is the sensible approach for a place like Memsie. Photos of each area help us quote the whole job.
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote once you have the details.
Why us?
- Fixed quotes based on photos, drawings or a visit
- Colour agreed before work starts
- Fully insured
- Failed material removed, not covered up
Read what affects the cost or our accreditations.
FAQs: Memsie
Can the sealant on our Memsie premises match the finishes?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Send colour references or photos and we will confirm what’s available for the product.
Do you cover business parks and estates near Memsie, such as Kessock Road Industrial Estate?
Yes. Estates, retail parks and business parks around Memsie, Kessock Road Industrial Estate among them, are all within reach. To start, just call 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
What about asbestos in old mastic?
It’s possible in older buildings, especially those built before 2000. We ask to see the asbestos register or survey before disturbing old sealant, and if something is suspected, work stops until it’s tested.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
How long does a job like this take?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
What site paperwork can you provide?
Let us know your requirements when you ask for a price. From you, we’ll need the asbestos information for older buildings and any site rules.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Commercial clients in Memsie
For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Commercial premises in Memsie
The east of Scotland, where Memsie is, gets less rain than the west. Cold snaps still affect when external joints can be sealed. Outside work is booked with that in mind
For a hotel such as Heath Hill Hotel, 0.5 miles to the north-west of Memsie, the colour of a joint at the bar or the bath matters to the look of the room.
Memsie is about 3 miles south-west of Fraserburgh, in Aberdeenshire. Looking for commercial sealant contractors in Memsie? We can help. We work across 179 places in Aberdeenshire, large and small. Our Aberdeen page has more on work in that area (35 miles or so).
Postcode districts covered here: AB43. Streets here include Cairn Close, Westcroft Close and Muir Road, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Fraserburgh (3 miles north-east), Sandhaven (3 miles north), Broadsea (3 miles north), Pittulie (3 miles north) and Rosehearty (4 miles north-west). Nearby towns on our patch include Peterhead (14 miles south-east), Roanheads (14 miles south-east), Clerkhill (14 miles south-east), Port Henry (14 miles south-east), Mintlaw (9 miles south) and Longside (10 miles south-east).
Around Memsie
A little further out are Fraserburgh Heritage Centre (3.4 miles north-east) and Fraserburgh Hospital (2.7 miles north-east). Green spaces nearby include Mormond Hill.
Doing it in-house
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
On site: what to expect
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes a few hours for one area, or a planned series of visits across a bigger building. Travel to smaller Scottish places like Memsie is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- First, details come to us: photographs, drawings or a schedule of the areas, and a site visit is booked where it helps.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- Before anything is cut out, we agree access, timings and sequence.
- Failed sealant is cut out and each joint cleaned back to sound, dry faces.
- Backing and primer go in where needed, then the chosen sealant is applied and tooled.
- Finished joints are checked with you and handed over with our 12-month guarantee.
Before we start on site
- Agree which areas must stay open
- Tell us what induction or permit system the site runs
- Send any specification or drawings in advance
Getting a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Read more
Towns and villages near Memsie
Also in Memsie
How the job changes by surface
Window and door perimeters
Inside, cracked sealant around frames and window boards is common. We use a paintable product where decorating follows and a silicone where it doesn’t, matched to the frame colour where colour matters.
Movement joints in walls and floors
A trafficked floor joint needs a different product from a wall joint. We’ll recommend the right filler or sealant for the traffic and movement; if the arrises are broken, we will say so before sealing.