Floor Joint Sealing in Memsie
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Memsie. Send photos or drawings for a fixed quote.
- Brittle joint filler breaking up
- Soft sealant dragged out of trafficked joints
- Trucks and loads jolting over damaged joints
Floor joint sealing near Memsie
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing for commercial buildings in Memsie
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Pricing depends on the length of joint, how worn the edges are and when we can get in and the figure is fixed before work begins. If you have loading bay joints breaking down and old filler gone hard, cracked or loose, we can put it right, whatever the surface. Most enquiries from Memsie start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
For floor or movement joints around smaller places like Memsie, we plan to finish in one visit where we can. Send photos, joint widths and details of the traffic first.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Location
- Memsie (AB43)
- Region
- Aberdeenshire
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Why deal with it now?
Every jolt over a broken joint passes into the truck, the load and the driver. Wheels and bearings wear faster and loads can shift, which nobody budgets for. A properly filled joint smooths the route. Renewing every failing joint on one visit is the sensible approach for a place like Memsie. Photos of each area help us quote the whole job.
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a quote when you are ready.
Why clients in Memsie choose us
- Commercial sealant work since 2005
- CHAS accredited
- Old sealant cut out, never sealed over
- Constructionline member for supplier checks
Read how commercial sealant jobs are priced or how we’re accredited.
Nearby places to Memsie
What else we do in Memsie
Building owners, agents and FMs in Memsie
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, with CSCS-carded applicators on site.
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
FAQs: Memsie
Is a hospital such as Fraserburgh Hospital somewhere you can work?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
Is Memsie too small for you to travel to?
No. Places such as Memsie are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Can the warehouse stay open while you work?
We phase it. Areas are taken out of use a section at a time. Tell us your site hours and access windows and we’ll plan around them.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Does the weather affect the work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Should floor joints be filled or sealed?
It depends on the traffic and the movement. Forklift routes generally call for a semi-rigid filler that holds the arrises, while joints that move more take a flexible sealant.
When to call us in Memsie
Small, hard wheels put a lot of load through a very small area. Where a joint is open, the wheel dips and strikes the far edge, and repeated impacts break the concrete away.
It’s worth sending us details if you spot any of the following:
- Broken arrises where pallet trucks cross
- A rough ride across broken joints
- Saw-cut joints left open and packed with grit
- Sealant pulled out along a truck route
For an estate such as Fraserburgh Hospital, which lies north-east of Memsie, the joints in ramps, decks and long building elevations all need attention over time.
Questions to ask before you book
- What level of public liability insurance do they hold?
- The named product and why it was chosen
- How the joint faces will be prepared and primed
- How they’ll work around occupants
Floors, slabs and movement joints in Memsie
Memsie is on Scotland’s drier eastern side. Frost and de-icing salt still find their way into open external joints. Autumn is a sensible time to seal them.
Warehouse floors on estates like Kessock Road Industrial Estate (to the north-east of Memsie) carry pallet trucks and forklifts over every saw-cut joint.
Memsie is about 3 miles south-west of Fraserburgh, in Aberdeenshire. Across the AB43 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Memsie is one of 179 places in Aberdeenshire on our list for floor joints. Our Aberdeen page has more on work in that area, about 35 miles away.
Commercial sites across AB43 are covered for floor joints. Streets here include Cairn Close, Westcroft Close and Muir Road. Sites close to Memsie are covered too, including Fraserburgh (3 miles north-east), Sandhaven (3 miles north), Broadsea (3 miles north), Pittulie (3 miles north) and Rosehearty (4 miles north-west). A short drive away, we cover Peterhead (14 miles south-east), Roanheads (14 miles south-east), Clerkhill (14 miles south-east), Port Henry (14 miles south-east), Mintlaw (9 miles south) and Longside (10 miles south-east).
Local landmarks in Memsie
Nearby you’ll also find Fraserburgh Heritage Centre (3.4 miles north-east) and Fraserburgh Hospital (2.7 miles north-east). Green spaces nearby include Mormond Hill.
Our process
Working in a building that stays open takes some planning. We sign and contain the area we’re in, with routes through the building left open and work section by section so the rest of the building stays in use. Tell us who will meet us and how to get in at your building near Memsie. We’ll confirm the plan with the fixed quote.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- We vacuum each run and prime it if the chosen product requires a primer.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- The area is handed back once it has cured enough to take traffic.
Getting the site ready
- Make sure the joints can be reached
- Send your site hours and access windows
- Arrange parking or a loading space
Get a fixed quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. For a chat about it beforehand, call the office on 01277 525 020 or email the details over.
Advice
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- A floor that is out of level for the racking or trucks
- Damaged or worn floor coatings and screeds
- Joint edges that have already broken away, which need repairing before filling (we will tell you if so)
Not sure which it is? You can call the office on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
Surfaces we seal
- Saw-cut induced joints
- Construction joints
- Loading bays
- Joints along racking aisles
- Forklift and pallet-truck routes
- Retail and showroom floors
General trades versus a specialist
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.