Mastic sealing for building owners and managing agents in Hillswick, Shetland Islands
Commercial sealant work in Hillswick for contractors, FMs and building owners: mastic sealing for building owners, managing agents and housing associations, quoted at a fixed price.
- Water getting in round frames after rain
- Draught complaints from residents or tenants
- Mastic failing across several blocks on an estate
Need mastic sealing in Hillswick?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Planned mastic for Hillswick portfolios
The sea is no more than about 1 mile from Hillswick. On buildings near the shore, the side facing the weather typically needs its mastic renewed first, so it’s worth inspecting those sides more often. Being in the east of Scotland, Hillswick gets less rain than the west coast. Outside mastic still waits for dry, frost-clear conditions. Block programmes are built with that in mind
Around Hillswick, a planned programme renews failed mastic across a building or estate in one go. Churches, halls and community buildings such as Northmavine Parish Church and Churchyard are looked after by trustees and committees like any other owner, and their frames, doors and external joints need mastic renewed in time.
Hillswick is in the Shetland Islands. If you are looking for mastic sealing in Hillswick, we can help, as we do across the Shetland Islands. Across the Shetland Islands, 63 places are covered, including Hillswick.
If you need mastic sealing in ZE2, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Close to Hillswick, our area also takes in Urafirth (1 mile north-east), Braehoulland (3 miles north-west), Hogaland (4 miles east), Sullom (5 miles south-east) and Ollaberry (5 miles east). Where a site is remote or on an island, travel and materials need planning ahead.
Near you in Hillswick
Recent enquiries here include premises near The Booth pub and the streets around them. Well-known places in the area include Tangwick Haa Museum (3.4 miles west). Not far away are Ness-houlls Water.
Mastic sealing in Hillswick
Blocks are lived in, so access and disruption have to be thought through. The sequence, the areas and the dates are settled with you so you can let residents know what is happening. Communal entrances and stairs stay usable throughout. We work on communal kitchens and washrooms, balcony and threshold joints and window and door perimeters on blocks, and the usual reasons a site gets in touch are communal area joints that look neglected and failed external movement joints. Whether you call it commercial sealant work, mastic application or joint sealing, in Hillswick it comes down to the same thing: the right product in a properly prepared joint.
In smaller Scottish places like Hillswick, managed property is mostly small blocks, sheltered housing, hotels and community buildings. Exposed walls take Scottish weather hard, and frame mastic shows it first.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Hillswick (ZE2)
- Region
- Shetland Islands
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Cost factors for mastic joints
These are the things that shape the price:
- Backing rod, priming and other preparation
- How much there is to seal
- How much existing material needs removing
- Induction, permit and paperwork requirements
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
What to include in your enquiry
The more we know, the firmer the quote. When you get in touch, include:
- Photos of the joints, close up and from further back
- The postcode of the building
- Rough lengths or quantities, or drawings if you have them
- How the joints are reached, and at what height
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call the office on 01277 525 020 or email the details over.
General trades versus a specialist
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
What else we do in Hillswick
Why it’s worth doing now in Hillswick
Sealing over failed mastic looks tidy for a while. It doesn’t bond and usually fails within a short time. Cutting out and resealing properly does it once. Around smaller places like Hillswick, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Early resealing prevents it.
A quote for mastic joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Why clients in Hillswick choose us
- One contact handling all your sites
- Specification-led, product-correct work
- Colour options checked against the specified product
- Joints cleaned back to sound surfaces
Surface by surface
Tenement and older buildings
Traditional buildings have joints that need a careful approach. We look at the substrate before choosing a sealant.
Communal areas
Communal areas stay in use while we work. Work is planned in sections.
When something else is needed
Being straight saves everyone time. Fresh joints won’t solve:
- Materials that need asbestos testing before work
- Leaks from above rather than through a joint
- Glazing that needs replacing
If you are not sure, just call the office on 01277 525 020 or email the details over and we’ll give you a straight answer.
Where we work in Hillswick
- Window and door perimeters on blocks
- Shopfronts below residential blocks
- External wall and movement joints
- Balcony and threshold joints
- Communal entrances and stairwells
- Communal kitchens and washrooms
How a job runs
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself usually taking one or more days per building, depending on the joint lengths and the access. For a building near Hillswick, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We inspect each building and record the joints that have failed.
- The quote is fixed and split as suits you.
- We agree the programme and dates with you.
- Failed sealant is removed and the faces prepared.
- New sealant goes in with backing rod and primer where needed.
- We check the finished work and confirm the guarantee.
What we need from you
- Send asbestos survey details if the building is pre-2000
- Tell us your opening times and when work is allowed
- Warn occupants and staff about the work
Getting a fixed quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, call 01277 525 020 or email drawings and photos.
Advice
Common questions from Hillswick clients
Is Hillswick inside the area you cover, given it’s on an island?
Yes. Every Scottish council area is within our area, and that includes island locations such as Hillswick. Ferry times and the weather set the plan, so we ask for photographs and a full list first.
Does a coastal location like Hillswick affect which sealant is used?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Do you check for asbestos in old sealant?
Some mastics in pre-2000 buildings contain asbestos. We check the asbestos register or survey before disturbing it and suspect material is tested first.
How long does a typical visit take?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Will residents or tenants be disturbed?
Occupiers stay in the building throughout. We flag any areas that need internal access well before the dates so it can be arranged.