Stromness floor joint sealing
Sealant work in Stromness for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.
- A gap opening alongside old joint filler
- Scruffy, dirty joint lines on a shop or showroom floor
- Chipped and spalling edges along forklift routes
Need floor joint sealing in Stromness?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
FAQs: Stromness
Do we have to stop operations in Stromness while the joints are sealed?
Normally not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we will plan from there.
Can you take on a job in Stromness, on the island?
Yes. We work across every Scottish council area, and that includes island locations such as Stromness. Ferry times and the weather set the plan, so we ask for photographs and a full list first.
Which is better for warehouse joints, filler or sealant?
There isn’t one answer for a whole floor. Hard wheels need edge support, which points to a semi-rigid filler, and movement joints or perimeters need something flexible. You will see the choice for each area in the quote.
Is it normal for joint filler to separate?
Young concrete carries on shrinking for a long time and a stiff filler can separate down one side. A top-up normally puts it right.
What information helps you price floor joint sealing?
Use our quote form, or email photographs and a plan, with the traffic on each area. We then send a fixed quote that shows the products and zones.
Is the floor joint work guaranteed?
A 12-month guarantee covers the work we do. It applies to our workmanship rather than structural movement or accidental damage.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
Floor joint sealing in Stromness, done properly
Not every floor joint we treat is in a warehouse. Retail units, showrooms and trade counters have slab joints crossed by trolleys, footfall and cleaning machines, where a gappy, dirty joint looks untidy and snags castors. A flush, well-finished joint tidies the whole floor. If you are dealing with soft sealant dragged out of trafficked joints and saw-cut joints left open and packed with grit, we can help, on saw-cut induced joints, joints along racking aisles and forklift and pallet-truck routes alike. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Stromness it comes down to the same thing: the right product in a properly prepared joint.
In smaller places such as Stromness, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Slabs and yards take vehicles, rain and frost.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Where
- Stromness (KW16)
- Region
- Orkney Islands
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Cost factors for floor joints
What shapes the price:
- Whether the work must be split into stages
- How much there is to seal
- The size and state of each joint
- Any access equipment needed
The product called for affects the cost, and so does the preparation. Access, phasing and site requirements come into it too.
What to include in your enquiry
There’s no need for a formal survey. A few details are enough to get going:
- Where the site is, with the postcode
- The type of building and who uses it
- Anything awkward about access or site hours
- When you need the work done
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Common problems we fix in Stromness
A slab keeps shrinking for a long time after it is cast, and the saw cuts are there so it cracks in straight, controlled lines. Each panel pulls back as it shrinks and the joints open up so a filler put in early may separate along one side.
Site and facilities staff are often the first to spot these:
- Failing joints at loading bays and dock doors
- A gap opening alongside old joint filler
- Old filler gone hard, cracked or loose
- Trucks and loads jolting over damaged joints
Schools like stromness primary school often have long brick elevations with movement joints that age quietly.
Comparing quotes
- How joint depth will be controlled
- How the existing material will be dealt with
- Can the work be phased to keep areas open?
- How long is the guarantee, and what does it include?
More services for Stromness
Surface by surface
Construction joints
Construction joints, sometimes called day joints, mark where one pour ended and the next began. They often see more movement than sawn joints, and that shapes the product choice.
Isolation joints at walls and columns
Where racking or plant sits near column joints, access is agreed before we start.
Building owners, agents and FMs in Stromness
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. One quote can cover more than one site, which keeps the paperwork simple.
On site: what to expect
At the end of each section, we remove the tape, clean down and inspect every joint, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. For work around Stromness, we aim for one trip, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
Preparing the site
- Confirm the product named in the specification
- Point out any areas we must not close
- Share your working hours and any access restrictions
Get a fixed quote
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or email the details over to discuss it first.
Read more
Joints that move: notes for Stromness
The sea is no more than about 1 mile from Stromness. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so it pays to keep them sealed. Stromness is in the east of Scotland, which is drier than the west. Frost and de-icing salt still find their way into open external joints. Sealing them before winter limits the damage.
Campuses like Heriot-Watt University - Orkney Campus (less than half a mile north of Stromness) mix old and new buildings, with movement joints wherever they meet.
Stromness is about 12 miles west of Kirkwall, in the Orkney Islands. We cover commercial sites throughout Stromness. Across the Orkney Islands, 51 places are covered, including Stromness.
Business premises anywhere in KW16 are within our area for floor joints. We cover commercial and managed buildings on Franklin Road, Manse Lane and Springfield Crescent. You will find Stromness on or near the A965. Nearby places we also cover include Cairston (1 mile north-east), Clouston (3 miles north-east), Stenness (4 miles north-east), Hoy (4 miles south) and Wasbister (4 miles north-east). Stromness is one of the busier places in the Orkney Islands, and its commercial and public buildings are all within our area. Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you phone 01277 525 020 or send photos by email.
Landmarks near Stromness
Well-known places in the area include Stromness Museum (under half a mile south). The countryside around Stromness includes Hill of Lynedardy and Brodgar RSPB Reserve.
Should maintenance staff do it?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.