Industrial and floor joint sealing in Clouston, Orkney Islands
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Clouston and the surrounding area. Send details for a fixed quote.
- Old filler gone hard, cracked or loose
- Drivers complaining about joints on a route
- Unfilled floor joints collecting dirt and grit
Floor joint sealing for Clouston sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle floor joint sealing in Clouston
Open joints take a beating from forklift and pallet-truck wheels. Each crossing knocks the unsupported edge until a crisp saw cut becomes a wide, broken groove. A properly filled joint carries the wheel over and protects both arrises. It also smooths the route for drivers and stock. If you’re dealing with flexible sealant torn out by wheels and cracked and crumbling joint fill, we can put it right. A specialist sealant contractor works differently from a general builder: on jobs in Clouston, preparation and product choice get the time they need.
For floor or movement joints around smaller places like Clouston, we plan to finish in one visit where we can. Photos, approximate widths and what uses the floor help us bring the right materials.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Clouston (KW16)
- Region
- Orkney Islands
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Travel to smaller Scottish places like Clouston is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. External joints need a dry spell as well.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- A fixed quote follows, listing the treatment for each area and the order of work.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- We tell you when each zone can carry trucks again and move on to the next.
Getting the site ready
- Let building users know which areas are affected
- For older buildings, check the asbestos register before work
- Move anything stored against the joints
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Read more
What we can’t put right
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be one of these:
- Worn screed or surface finishes
- A floor that rocks at the joints, which needs a structural fix
- Broken concrete either side of the joint
If in doubt, call the office on 01277 525 020 or use the quote form and we will say what we think.
Where we work in Clouston
- Saw-cut induced joints
- Construction joints
- Joints along racking aisles
- Forklift and pallet-truck routes
- Retail and showroom floors
- Loading bays
Joints that move: notes for Clouston
Clouston sits close to the coast, within about 1 mile. Open joints in coastal car parks and yards let in salt-laden water as well as grit, and edges left open tend to break up faster. For an island location such as Clouston, work is planned around ferry crossings and the weather. Photos and joint sizes help us load the right products.
University campuses such as Robert Gordon University Orkney Project, 3.1 miles to the south-west of Clouston, have car parks, paved walkways and building elevations with movement joints. In and around Clouston, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Clouston is about 9 miles west of Kirkwall, in the Orkney Islands. We send applicators to Clouston for floor joints, handled exactly as we handle every other area. Clouston is one of 51 places in the Orkney Islands on our list.
We cover the KW16 postcode districts for floor joints. If your building is just outside Clouston, we cover Stenness (1 mile north-east), Cairston (2 miles west), Grimeston (2 miles north), Germiston (3 miles east) and Wasbister (3 miles north-west). For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.
Landmarks near Clouston
Well-known places in the area include Stromness Museum (3.3 miles south-west). Not far away are Brodgar RSPB Reserve and Loch of Stenness.
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Ask drivers not to drag forks or pallets
- Let us know what the floor is cleaned with
- Treat loading bay joints first if they’re failing
- Photograph any joint that starts to chip
Problems inside the 12-month guarantee period are ours to put right. Beyond that, an inspection once or twice a year catches failing joints early.
Joints are easiest to look after when someone checks them regularly. A phased plan, worst routes first, spreads the work out so nothing is left to fail.
How the quote is worked out
Each job is priced on its own details. The main factors are:
- Joint width, depth and condition
- Site requirements such as inductions and permits
- Whether the work must be split into stages
- Distance, for remote addresses
What a job costs comes down to the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.
Before you send an enquiry
A few photos plus some basic facts will normally do. It helps to include:
- Access details, including height
- Rough lengths or quantities, or drawings if you have them
- Your programme or deadline
- What the building is and how it’s used
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or send details through our quote form.
FAQs: Clouston
Do you work on the island where Clouston is?
Yes. Every Scottish council area is within our area, and that includes island locations such as Clouston. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Does a site in Clouston have to shut while its joints are sealed?
Usually not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
Is it normal for joint filler to separate?
Separation typically comes from slab shrinkage, poor preparation or the wrong product. We look at which it is before recommending anything.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
Do you repair broken joint edges?
Filling against broken edges doesn’t last. If the arrises have spalled, we will say they need repair before filling and set out how that affects the job.
Who decides which product is used?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
What else we do in Clouston
Owners, agents and contractors
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.