Floor Joint Sealing in Shorne
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Shorne. Send details for a fixed quote.
- Untidy open joints in a retail unit
- Chipped and spalling edges along forklift routes
- Dock area joints that have failed first
Floor joint sealing in Shorne
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Shorne
Sometimes the concrete either side of a joint has already spalled. Filling against a crumbled arris won’t hold for long, so if the edges need repair before any filling, we’ll say so and explain how it affects the programme. The enquiries we see most involve saw-cut joints left open and packed with grit and failing joints at loading bays and dock doors, across retail and showroom floors, joints along racking aisles and loading bays. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Shorne, that means joint design, primers and backing rod as standard.
Around smaller places such as Shorne, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Shorne (DA12)
- Region
- Kent
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Traffic, movement and joints around Shorne
Shorne sits close to the coast, within about 3 miles. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so it pays to keep them sealed. At least three named trading, business or retail sites lie within about 3 miles of Shorne. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
A campus such as University for the Creative Arts - Rochester (4.3 miles south-east of Shorne) has long runs of movement joint in its buildings, decks and paving. For a school such as Shorne Church of England Primary School, playground and building joints can be done in the holidays.
Shorne is about 2 miles south-east of Gravesend, in Kent. If you’re looking for floor joint sealing in Shorne, we can help. Across Kent, 931 places are covered, including Shorne. For work in that direction, see our London page, about 23 miles away.
Commercial sites across DA12 are covered for floor joints. If your site is on The Street, Cob Drive and Crown Green or close by, send details and we will quote for floor joints. Sites close to Shorne are covered too, including Upper Ifield (1 mile west), Shorne Ridgeway (1 mile south), Higham (1 mile east), Thong (1 mile west) and Gadshill (1 mile east). Bigger towns within reach include Maidstone (11 miles south), Sittingbourne (14 miles east), Dartford (9 miles west), Sevenoaks (14 miles south-west), Northfleet (4 miles west) and Swanley (11 miles west).
Local landmarks in Shorne
Recent enquiries here include premises near The Rose and Crown pub, Shorne Woods Country Park and Thamesview School, among other places. The closest station to Shorne is Higham station, roughly 1.7 miles north-east of the centre. A little further out are Gravesham Museum (3.2 miles north-west) and Gravesham Community Hospital (3.4 miles north-west). The countryside around Shorne includes Rede Common and Gad's Hill.
Signs you need floor joint sealing in Shorne
Pallet-truck and forklift wheels concentrate weight on a tiny contact patch. Crossing an open joint, the wheel drops and knocks the opposite arris and those knocks chip the edge apart bit by bit.
Site and facilities staff are often the first to spot these:
- Broken arrises where pallet trucks cross
- Grimy joint lines spoiling a showroom floor
- Brittle joint filler breaking up
- Unfilled floor joints collecting dirt and grit
Another example is Lion Business Park, 2.2 miles north-west of Shorne, where floors and yards would be done in stages around the occupiers.
Before you book anyone
- How long is the guarantee, and what does it include?
- How they handle RAMS and site documents
- Whether primer will be used where the manufacturer specifies it
- How joint depth will be controlled
After the work
A few simple habits keep the new joints working:
- Stop forks and pallets being dragged across joints
- Tell us about strong cleaning chemicals before we quote
- Keep photographs of joints that look like they’re failing
- Sweep debris out of open joints until they can be filled
A routine walk of the busiest aisles shows how the joints are holding up. Watch for filler pulling away from an edge, fresh chipping or grit collecting and keep photos so changes are easy to compare.
A broken joint on a main route is crossed by every truck on that route. Sorting it early looks after your equipment as well as the slab.
When to bring in a specialist
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
For managing agents and facilities managers
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
We work for building owners and managing agents on everything from one building to a spread of sites. Several sites can go on one quote, so there’s one set of paperwork to deal with.
How a job runs
Tell us your site hours and access windows and we will plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Rural sites near Shorne may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- We look at joint widths, edge condition and the traffic on each route.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- We vacuum each run and prime it if the chosen product requires a primer.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- Each phase reopens when the product is ready for wheels, then we start the next.
Preparing the site
- Let us know about inductions and permits
- Point out any areas we must not close
- Send asbestos survey details if the building is pre-2000
Get a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, phone 01277 525 020 or email the details over.
Advice
Towns and villages near Shorne
What else we do in Shorne
How the quote is worked out
These are the things that shape the price:
- Access and working height
- The size and state of each joint
- How much there is to seal
- Distance, for remote addresses
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Before you send an enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- The site address and postcode
- Specification clauses that apply
- Photos of the joints, close up and from further back
- The type of building and who uses it
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or send photos by email.
FAQs: Shorne
Is a smaller place like Shorne outside your area?
No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Does the sea air around Shorne change the choice of sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Will we need to close the floor?
In the majority of cases, just the area being treated is coned off. Each zone reopens when the product can take traffic, then we move to the next.
Who decides which product is used?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Why is there a gap next to the joint filler?
Young concrete carries on shrinking for a long time and a stiff filler can separate down one side. It is typically dealt with by topping up.