Shorne expansion joint sealing
Commercial sealant work in Shorne for contractors, FMs and building owners: expansion and movement joint sealing in walls, decks and floors, with a fixed quote first.
- Brittle, chalky sealant on external joints
- Debris jammed in movement joints
- Sealant peeling off one face of the joint
Expansion joint sealing near Shorne
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing in Shorne
We cover the full range of movement joints: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. The product depends on the movement, the weather and anything that runs over it. Most enquiries involve arrises breaking up along floor joints and weathered movement joint sealant that no longer flexes, on brickwork movement joints, precast concrete panel joints and car park decks and ramps. For commercial sealant work in Shorne, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
For a site near Shorne, measurements and photos up front mean one trip where possible, with the right materials on hand. Note joint widths and the traffic that uses them, and we will take it from there.
A 12-month guarantee applies to all our work in Kent. Should something we installed fail, phone 01277 525 020 or use the quote form and we’ll come back to it.
- Where
- Shorne (DA12)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Common problems we fix in Shorne
With no backing rod or bond-breaker in place, sealant grips the base of the joint too. Bonded on three faces, it can’t stretch evenly when the joint opens so backing is set before sealing.
It’s worth sending us details if you spot any of the following:
- Joints packed with grit and debris
- Car park joints leaking onto vehicles below
- Arrises breaking up along floor joints
- Damp inside where a wall movement joint has failed
In a school such as Shorne Church of England Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
What your quote should include
- Whether primer will be used where the manufacturer specifies it
- Who will actually carry out the work
- Will failed sealant be removed rather than covered?
- Will RAMS and insurance details be available?
How the quote is worked out
These are the things that shape the price:
- The total length or number of joints
- Any access equipment needed
- Whether old sealant has to be cut out first
- Backing rod, priming and other preparation
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a fixed quote once you have the details.
What to include in your enquiry
A few photos plus some basic facts will normally do. It helps to include:
- Where the site is, with the postcode
- The type of building and who uses it
- Rough lengths or quantities, or drawings if you have them
- Whether an asbestos survey exists
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Why it’s worth doing now in Shorne
A failed joint seal doesn’t mean the slab, panel or wall needs replacing. If the material either side is sound, a properly prepared reseal restores the joint. If the edges have broken up, we’ll tell you they need repairing first. Converted and older buildings near places like Shorne tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
Why us?
- Clear, fixed quotes
- Joints cleaned back to sound surfaces
- Coloured sealants to suit the setting, where available
- Colour options checked against the specified product
Read our cost guide or our accreditations.
Places near Shorne
What else we do in Shorne
Diagnose, treat, sign off
Site rules come first: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. If others near Shorne need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Share the asbestos register for older buildings
- Tell us which areas need to stay in use
- Share your working hours and any access restrictions
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, phone 01277 525 020 or email drawings and photos.
Advice
Surface by surface
Internal floor movement joints
Forklift and pallet-truck wheels break unsupported joint edges. We match the product to the traffic and the movement, and tell you if edges need repairing first.
Cladding panel joints
Access to cladding joints is agreed before the price is fixed. Close-up photographs help us judge the joints, or we visit if they don’t show enough.
When something else is needed
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Joints too narrow for the movement, which need redesigning by the engineer
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
Not sure which it is? You can ring 01277 525 020 or use the quote form and we’ll tell you honestly.
Surfaces we seal
- Brickwork movement joints
- Car park decks and ramps
- Blockwork control joints
- Cladding panel joints
- Precast concrete panel joints
- Podiums and floor movement joints
Slabs, ramps and loading bays in Shorne
The sea is no more than about 3 miles from Shorne. Open joints in coastal car parks and yards let in salt-laden water as well as grit, and edges left open tend to break up faster. Central London is about 23 miles from Shorne. The roads out of London are lined with trade parks and distribution sheds, and their floor joints take forklift and pallet-truck traffic all day.
Hospitals like Gravesham Community Hospital (to the north-west of Shorne) have multi-storey or surface car parks whose joints carry vehicles round the clock. If you manage units on an estate such as Nuralite Industrial Estate, which lies north-east of Shorne, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Shorne is about 2 miles south-east of Gravesend, in Kent. Across the DA12 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Shorne is one of 931 places in Kent on our list. There’s a separate page for London, roughly 23 miles from Shorne.
We take on movement joints across the DA12 postcode area, for business premises of every kind. Among the streets we cover are The Street, Cob Drive and Crown Green, and sites on any of them can send details for a fixed quote. Sites close to Shorne are covered too, including Upper Ifield (1 mile west), Shorne Ridgeway (1 mile south), Higham (1 mile east), Thong (1 mile west) and Gadshill (1 mile east). Nearby towns on our patch include Maidstone (11 miles south), Sittingbourne (14 miles east), Dartford (9 miles west), Sevenoaks (14 miles south-west), Northfleet (4 miles west) and Swanley (11 miles west).
Near you in Shorne
Locally, jobs take us to sites close to The Rose and Crown pub, Shorne Woods Country Park and Thamesview School. Shorne’s nearest station is Higham station, about 1.7 miles north-east of the centre. Well-known places in the area include Gravesham Museum (3.2 miles north-west) and Gravesham Community Hospital (3.4 miles north-west). The countryside around Shorne includes Rede Common and Gad's Hill.
FAQs: Shorne
Is a hospital such as Gravesham Community Hospital somewhere you can work?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is a smaller place like Shorne outside your area?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.
What timescale should we allow for resealing expansion joints?
That depends on joint lengths, widths, access and how much old sealant or filler needs removing. As a guide, it typically takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access.
Can you seal joints in cold or wet weather?
Weather matters for any external joint because a damp or frozen joint won’t take a proper bond. Indoor joints can typically carry on regardless.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Why do our movement joints keep failing?
It depends on how the sealant has let go: tearing down the centre means too much movement, and lifting off one side means poor adhesion. Broken edges are a third possibility.