Industrial and floor joint sealing in Gravesend, Kent
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Gravesend. Send photographs or drawings for a fixed quote.
- Filler that has parted from one face
- Flexible sealant torn out by wheels
- Old filler gone hard, cracked or loose
Need floor joint sealing in Gravesend?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing in Gravesend, done properly
Concrete floors in warehouses and factories are cut into bays with saw cuts and day joints, and each joint line is a weak edge that wheels run over all day. Our job is to put the right filler or sealant into them for the loads and the movement they see, so the arrises are supported and grit stays out. If you have a gap opening alongside old joint filler and untidy open joints in a retail unit, we can help. Most enquiries from Gravesend start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Car parks and yards in towns like Gravesend take tyre loads and, in winter, de-icing salt. Catching a joint before its edges break is the simpler route.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Gravesend (DA12, DA11)
- Region
- Kent
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What we are called out for in Gravesend
An ageing filler or sealant can go brittle and split especially under daily scrubbing and traffic. At that point it neither holds the edges nor keeps debris out.
Common reasons buildings call us in:
- Trucks and loads jolting over damaged joints
- Sealant pulled out along a truck route
- Old filler gone hard, cracked or loose
- Failing joints at loading bays and dock doors
Schools like Whitehill Primary School often have long brick elevations with movement joints that age quietly.
What your quote should include
- How joint depth will be controlled
- Health and safety accreditation such as CHAS
- Which product they’ll use, and why it suits the joint
- Will RAMS and insurance details be available?
Owners, agents and contractors
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Slabs, ramps and loading bays in Gravesend
With the shore within about 2 miles, Gravesend counts as a coastal location. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. Gravesend lies roughly 21 miles out from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors; their floors carry heavy traffic every shift.
A campus such as University of Greenwich, 4.9 miles west of Gravesend, has long runs of movement joint in its buildings, decks and paving. If you manage units on an estate such as Canal Industrial Park, 0.7 miles north of Gravesend, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Gravesend is about 9 miles north-west of Gillingham, in Kent. We cover commercial sites throughout Gravesend, whether it’s a single job or part of a planned programme. Gravesend is one of 931 places we cover in Kent. For work in that direction, see our London page (21 miles or so).
Anyone looking for floor joint sealing in DA12 and DA11 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Christ Church Road, Hillside Drive and Laurel Avenue. Being close to the A2 and A226, Gravesend is easy to get to with materials and equipment. Close to Gravesend, our area also takes in Windmill Hill (1 mile north-west), Milton-next-Gravesend (1 mile north-east), Denton (1 mile east), Singlewell or Ifield (1 mile south) and Northfleet (1 mile west). A short drive away, we cover Maidstone (13 miles south-east), Dartford (7 miles west), Sevenoaks (13 miles south-west), Swanley (9 miles west), Kings Hill (11 miles south) and Foley Park (12 miles south-east).
Local landmarks in Gravesend
Locally, jobs take us to sites close to Northfleet Urban Country Park, St John's Catholic Comprehensive and St John's Catholic Comprehensive, among other places. The closest station to Gravesend is Gravesend station, roughly 0.9 miles north-west. A little further out are Gravesham Museum (0.9 miles north-west) and Stone Castle (4.5 miles west). For a walk, there’s Sawyers Lake and Gad's Hill.
Keeping the joints sound
For the best life from the joints:
- Tell us about strong cleaning chemicals before we quote
- Photograph any joint that starts to chip
- Walk the main routes and inspect joint lines on a regular cycle
- Stop forks and pallets being dragged across joints
A routine walk of the busiest aisles shows how the joints are holding up. Look for separation down one side, new chips in the arris and debris gathering and keep photographs so changes are easy to compare.
Edges tend to break slowly at first, then quickly. Each chip makes the drop deeper and the next impact harder, so it pays to act at the first signs.
On site: what to expect
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Most work in Gravesend is one building at a time: a school, a unit, an office or a block. Your photos, drawings or a site visit come first, followed by a fixed quote.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- We hand each phase back when it can take traffic.
Getting the site ready
- Let us know about inductions and permits
- Clear stock, furniture or equipment away from the joints
- Tell staff and tenants when we’ll be in
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Advice
Your questions answered
Will you take on work at estates like Canal Industrial Park, close to Gravesend?
Yes, sites like Canal Industrial Park are within our area, along with the rest of Gravesend. A few photographs and the unit address let us price the work.
Does a coastal location like Gravesend affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Why is there a gap next to the joint filler?
It can be shrinkage, contamination on the joint faces or a product unsuited to the movement. We look at which it is before recommending anything.
Which is better for warehouse joints, filler or sealant?
It depends on the traffic and the movement. Trafficked joints on truck routes usually need a semi-rigid filler to support the edges, while joints that move more take a flexible sealant.
What information helps you price floor joint sealing?
Send details through our quote form or by email and tell us what runs on the floor. A fixed quote follows with the product and phasing set out.
Nearby places to Gravesend
What else we do in Gravesend
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
How the quote is worked out
A fixed quote reflects the actual work. It takes account of:
- Whether the work must be split into stages
- Access and working height
- Site requirements such as inductions and permits
- The total length or number of joints
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site requirements come into it too.
Details that help us quote
The more we know, the firmer the quote. When you get in touch, include:
- Anything awkward about access or site hours
- The site address and postcode
- The product your specification calls for
- Approximate linear metres or a joint schedule
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.