Coloured Sealant in Shorne
Coloured and colour-matched sealant for visible joints in Shorne and across Kent. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Hotel refurbishments with a set colour scheme
- Old sealant that has yellowed, darkened or faded
- Smeared sealant on stone or joinery
Need coloured sealant in Shorne?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Site staff or a sealant specialist?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
How we handle coloured sealant in Shorne
On a finished interior or a high-quality elevation, the sealant is part of the look. We install coloured and colour-matched sealant so joints sit quietly against cladding, stone, brick, frames and shop-fit finishes. The right product for the joint always comes first, then the colour. Most enquiries involve old colour-matched joints lifting at the edges and fit-outs with a sealant colour in the specification, on powder-coated and anodised frames, office fit-out finishes and natural stone and brick. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Shorne is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Business units in the countryside around places like Shorne are often converted barns, stables or farmyards. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Place
- Shorne (DA12)
- Region
- Kent
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Cost factors for colour-matched joints
Your fixed quote is built from the real scope. It takes account of:
- Backing rod, priming and other preparation
- Specialist products, such as fire-rated or hygienic sealants
- Whether the work must be split into stages
- Site requirements such as inductions and permits
A quote for colour-matched joints depends on how many there are, their condition and the access, plus any specification you’re working to. Ask us for a fixed quote.
What we need to price the job
The more we know, the firmer the quote. Helpful details to send:
- When you need the work done
- Specification clauses that apply
- Drawings or a marked-up plan, if available
- The asbestos register, for older buildings
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. If you have questions first, call 01277 525 020 or send details through our quote form.
Do you need coloured sealant in Shorne?
When frames are recoated or a space is rebranded, the old joints may no longer suit. Refurbishments and rebrands often bring a new colour scheme.
Most enquiries start with something like this:
- Coloured joints that have cracked with movement
- Patch repairs in several different colours
- Discoloured joints on a visible elevation
- A bead that fights the cladding or frame colour
If you have premises on more than one site, say at Nuralite Industrial Estate and Lion Business Park, one contractor and one quote can cover both.
Questions to ask before you book
- How the joint faces will be prepared and primed
- The named product and why it was chosen
- How joint depth will be controlled
- Whether their applicators hold CSCS cards
FAQs: Shorne
Will you take on work at estates like Nuralite Industrial Estate, close to Shorne?
Yes. Our area takes in Shorne and its surroundings, with estates and business parks such as Nuralite Industrial Estate included. To start, just give us a call on 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Is Shorne too small for you to travel to?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Is any job too small?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
How do we ask for a quote?
The quote form is the simplest route, though you can also speak to us on 01277 525 020 or email a schedule or drawings. Include photographs or drawings if you have them.
Can weather delay the job?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
How a job runs
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Jobs in and around smaller places like Shorne are typically planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- We start with photographs, drawings or a visit to see the finishes.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- We prepare each joint, prime where needed and fit backing.
- The agreed colour is installed and tooled neatly.
Preparing the site
- Tell staff and tenants when we will be in
- Point out parking and an unloading spot
- Send your site hours and access windows
Quotes
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or send details through our quote form.
Related advice
Why it’s worth doing now in Shorne
Across a chain of shops or hotels, consistency matters. Setting one product and colour for every site avoids variation from one fit-out to the next. Halls, stores and units around places like Shorne may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why us?
- Colour options checked against the specified product
- Sealing commercial buildings since 2005
- Specification-led, product-correct work
- Our applicators hold CSCS cards
Read what affects the cost or our accreditations.
Maintenance after handover
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Plan full-run reseals on visible elevations
- Insist on the agreed colour for any repair
- Approve a sample bead on high-profile areas
- Keep harsh solvents away from visible joints
Expect some change in appearance over the years. That is normal for exposed sealant.
Plan resealing of visible joints before they look tired. Replacing them on a schedule keeps finishes looking right.
Also near Shorne
More services for Shorne
Frontages, fit-outs and joints in Shorne
With the shore within about 3 miles, Shorne counts as a coastal location. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. Where a frontage needs a particular colour, the product still has to suit that exposure. Less than 3 miles from Shorne there are at least three named estates and business parks. Tenant changes on such sites bring fit-outs, and fit-outs bring new joints, often in a colour the occupier specifies.
A unit on an estate like Nuralite Industrial Estate (to the north-east of Shorne) normally has an office front, a trade counter and staff facilities with joints of their own. Offices and shops close to stations such as Higham station (to the north-east of Shorne) tend to be busy all day, so sealant work is planned around opening hours.
Shorne is about 2 miles south-east of Gravesend, in Kent. Looking for coloured sealant in Shorne? We can help. 931 places across Kent fall within our area, Shorne among them. There’s a separate page for London, about 23 miles away.
Commercial sites across DA12 are covered. Among the streets we cover are The Street, Cob Drive and Crown Green, and sites on any of them can send details for a fixed quote. If your building is just outside Shorne, we cover Upper Ifield (1 mile west), Shorne Ridgeway (1 mile south), Higham (1 mile east), Thong (1 mile west) and Gadshill (1 mile east). A short drive away, we cover Maidstone (11 miles south), Sittingbourne (14 miles east), Dartford (9 miles west), Sevenoaks (14 miles south-west), Northfleet (4 miles west) and Swanley (11 miles west).
Landmarks near Shorne
We work on buildings around The Rose and Crown pub, Shorne Woods Country Park and Thamesview School, among other places. Shorne’s nearest station is Higham station, roughly 1.7 miles north-east. Nearby you’ll also find Gravesham Museum (3.2 miles north-west) and Gravesham Community Hospital (3.4 miles north-west). For a walk, there’s Rede Common and Gad's Hill.