Shere floor joint sealing
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Shere and the surrounding area. Send photographs or drawings for a fixed quote.
- Loading bay joints breaking down
- Scruffy, dirty joint lines on a shop or showroom floor
- Broken arrises where pallet trucks cross
Floor joint sealing in Shere
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our floor joint sealing in Shere
Across Shere and the rest of Surrey, it runs the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Approximate joint lengths, a few photographs and a floor plan are enough for a quick quote and a visit can be arranged where that is easier. If you are dealing with failing joints at loading bays and dock doors and untidy open joints in a retail unit, we can help, whatever the surface. Whoever orders the work in Shere, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around smaller places such as Shere, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant.
- Location
- Shere (GU5)
- Region
- Surrey
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
General trades versus a specialist
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. If an area should be left alone while the sealant cures, we say how long and put signs out. Rural sites near Shere may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
Before we start on site
- Share your working hours and any access restrictions
- Tell us which areas need to stay in use
- Tell us what induction or permit system the site runs
Get a fixed quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or email us to discuss it first.
Related advice
Other services in Shere
Leave it or put it right?
Broken joints shake trucks, stock and operators alike. That means extra wear on wheels and a rougher ride for staff, adding costs nobody plans for. A filled joint takes most of that out. Converted and older buildings near places like Shere tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
Why clients in Shere choose us
- Our applicators hold CSCS cards
- Failed material removed, not covered up
- Commercial sealant work since 2005
- Constructionline member
See how commercial sealant jobs are priced and our accreditations and insurance.
Joints that move: notes for Shere
The South East is one of the drier parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in. Shere is about 25 miles from central London. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift.
For a school such as Shere CofE Aided Infant School, playground and building joints can be done in the holidays. Hospital campuses such as St. Luke’s Hospital (to the west of Shere) grow in stages, leaving movement joints wherever new blocks meet old.
Shere is about 5 miles east of Guildford, in Surrey. Looking for floor joint sealing in Shere? We can help. Our Surrey coverage takes in 379 places, large and small. We also cover London, some 25 miles away.
We take on floor joints across the GU5 postcode area, whatever the building. Streets here include Lower Street, Orchard Road and Shere Lane. Just outside Shere, we also work in Gomshall (1 mile east), Albury Heath (1 mile south-west), Little London (1 mile south-west), Albury (1 mile west) and Abinger Hammer (1 mile east). Further afield, our area takes in Guildford (5 miles west), Woking (8 miles north-west), Camberley (14 miles north-west), Epsom (12 miles north-east), Horley (13 miles east) and Redhill (13 miles east).
Near you in Shere
We work on buildings around Colekitchen Down and The White Horse Public House. For rail, the closest station is Gomshall station, roughly 1.1 miles east. Well-known places in the area include Shere Museum (under half a mile east) and Abinger Castle (2.8 miles south-east). For a walk, there’s Silent Pool and St Martha's Hill.
Questions about Shere
Would you work within a site like St. Luke’s Hospital?
Yes, healthcare and care buildings are part of our work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Must our site in Shere stop work while the joints are done?
Typically not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we will plan from there.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
How long do sealant joints last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
What happens if the joint edges are damaged?
A filler needs sound edges to grip. We’ll tell you if the joint edges need repairing first, so you can decide how to proceed.
Is Shere in your area?
Yes. We cover Shere, and the simplest way to start is to call the office on 01277 525 020 or email drawings and photos.
Different surfaces, different methods
Semi-rigid joint fillers
If a joint is still opening, a semi-rigid filler may part from one face. A later top-up typically puts that right, and we’ll explain it when we quote.
Isolation joints at walls and columns
Isolation joints separate the slab from walls, columns and plinths so it can move independently. Something flexible normally suits them, not a stiff filler.
What we can’t put right
Part of a good diagnosis is knowing where sealant stops. We will tell you if the real problem is one of these:
- Level or flatness problems across the floor
- Broken concrete either side of the joint
- Unstable slabs moving under traffic
If you’re not sure, just give us a call on 01277 525 020 or email drawings and photos and we will give you a straight answer.
Where we work in Shere
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Construction joints
- Retail and showroom floors
- Loading bays
- Joints along racking aisles
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.