Coloured and colour-matched sealant in Shere, Surrey
Coloured and colour-matched sealant for visible joints in Shere and across Surrey. CHAS accredited and fully insured, with a 12-month guarantee.
- Coloured joints that have cracked with movement
- Smeared sealant on stone or joinery
- Old sealant that has yellowed, darkened or faded
Need coloured sealant in Shere?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant for commercial buildings in Shere
Shop fits, hotels and offices are where colour-matched sealant earns its place. A grey bead on a black shopfront or a white line against oak looks like a defect, however well it was installed. We pick a colour from the product’s range that sits with the finish. Site teams most often ask us about fit-outs with a sealant colour in the specification and white or grey sealant that clashes with the finish, on natural stone and brick, shop-fit joinery and counters and powder-coated and anodised frames. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Shere is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
A job in a smaller place like Shere is usually a single building. We’ll want a full list and photographs first, so the right products come on the day and nothing waits for a second trip.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Shere (GU5)
- Wider area
- Surrey
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What affects the price in Shere
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Joint width, depth and condition
- Removal of failed or old sealant
- Whether the work must be split into stages
- Any access equipment needed
The specified product makes a difference, and so does the preparation. Access, phasing and site requirements come into it too.
What to include in your enquiry
However big the job, these details speed things up:
- Anything awkward about access or site hours
- The product your specification calls for
- The asbestos register, for older buildings
- Any dates the work must fit around
For a fixed quote, call the office on 01277 525 020 or email a schedule or drawings. Our quote form is another easy route.
What we can’t put right
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- A colour that never alters with age
- Repairing damaged frames or cladding
- A guaranteed perfect match to every finish
Not sure which it is? You can call 01277 525 020 or email drawings and photos and we’ll tell you honestly before you book.
Surfaces we seal
- Cladding panels
- Natural stone and brick
- Hotel bathrooms and public areas
- Shop-fit joinery and counters
- Powder-coated and anodised frames
- Office fit-out finishes
Your questions answered
Is Shere too far out for you?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Which documents can you supply for work in Shere?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We are CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
Does coloured sealant change colour outdoors?
It can, to a degree. How much depends on the product, the colour and the exposure, and we can’t promise a colour that never alters.
Can we specify the colour by RAL number?
Yes. Give us the RAL reference and we will check it against the product’s range. We’ll tell you which colour is closest before work starts.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also call 01277 525 020 or email us. Include photographs or drawings if you have them.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we will plan around them. Our office runs Monday to Friday, 8am until 5pm.
Surface by surface
Natural stone
Natural stone rarely has one colour, and the sealant has to work with that. A stone-safe neutral-cure product is used.
Shop-fit and joinery finishes
Retail fit-outs mix many finishes in a small space. We choose sealant colours that suit each junction.
Our process
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first, and our waste is bagged and taken away as we go. For a building around Shere, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- Photos or drawings show us the finishes and joints.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- The agreed colour is installed and tooled neatly.
Preparing the site
- For older buildings, check the asbestos register before work
- Clear stock, furniture or equipment away from the joints
- Point out any areas we must not close
Quotes
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, give us a call on 01277 525 020 or send details through our quote form.
Read more
Working on commercial sites near Shere
The South East is one of the drier parts of the UK. Drier doesn’t mean dry every day, so frontage work still has some give in the dates. Shere lies roughly 25 miles out from central London. Business parks and retail centres are common around the capital’s motorway corridors. If you have premises across the region, one contractor can cover them all.
Offices and shops close to stations such as Gomshall station, 1.1 miles east of Shere, tend to be busy all day, so sealant work is planned around opening hours. For any commercial premises in Shere, a lasting joint depends on full removal of the old sealant and clean, dry faces.
Shere is about 5 miles east of Guildford, in Surrey. Any commercial site in Shere is covered. Shere is one of 379 places we cover in Surrey for colour-matched joints. London is covered too, around 25 miles from Shere.
We take on colour-matched joints across the GU5 postcode area. We cover commercial and managed buildings on Lower Street, Orchard Road and Shere Lane and the roads nearby. If your building is just outside Shere, we cover Gomshall (1 mile east), Albury Heath (1 mile south-west), Little London (1 mile south-west), Albury (1 mile west) and Abinger Hammer (1 mile east). Nearby towns on our patch include Guildford (5 miles west), Woking (8 miles north-west), Camberley (14 miles north-west), Epsom (12 miles north-east), Horley (13 miles east) and Redhill (13 miles east).
Around Shere
In Shere, that means premises near Colekitchen Down and The White Horse Public House, among other places. For rail, the closest station is Gomshall station, roughly 1.1 miles east of the centre. Other landmarks nearby include Shere Museum (less than half a mile east) and Abinger Castle (2.8 miles south-east). Open spaces near Shere include Silent Pool and St Martha's Hill.
Why it’s worth doing now in Shere
Standard white or grey sealant is cheaper to stock, but it doesn’t always suit the finish. Where joints are on show, choosing a better colour is normally worth it in how the finished space looks. Converted and older buildings near places like Shere tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Why choose Mastic Doctor in Shere
- Specification-led, product-correct work
- Clear, fixed quotes
- Fully insured, including public liability cover
- A range of standard colours, depending on the product
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Maintenance after handover
A few simple habits keep the new joints working:
- Agree the sealant colour early and write it into the specification
- Keep the area clear while the sealant cures
- Ask contractors to check the colour before resealing
- Look at the cured colour before the full run
Let the joints cure as the manufacturer advises before they’re cleaned. Coloured sealant marks more visibly than white while it is fresh, so brief cleaners and other trades.
Settle the colour early in the project. When colour is left to the last minute, it is often wrong, so agree it with the designer at the start.