Woking floor joint sealing
Floor joint sealing in Woking, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Flexible sealant torn out by wheels
- Unfilled floor joints collecting dirt and grit
- Broken arrises where pallet trucks cross
Need floor joint sealing in Woking?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing for commercial buildings in Woking
It isn’t only heavy industry. Shops, showrooms and trade counters have joints that take trolleys, foot traffic and scrubber-driers, and an open, grimy joint line looks poor as well as catching wheels. A neat, flush fill makes the floor easier to clean and look after. The enquiries we see most involve grimy joint lines spoiling a showroom floor and flexible sealant torn out by wheels, on joints along racking aisles, forklift and pallet-truck routes and construction joints. Most enquiries from Woking start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Work on floor and movement joints in a large place such as Woking is usually phased: aisle by aisle or deck by deck, with areas handed back as each section cures.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
Doing it in-house
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
What sealant work can’t fix
Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:
- Cracks across panels caused by settlement or overload
- Joint edges that have already broken away, which need repairing before filling (we’ll tell you if so)
- Slab panels that rock or move under load
If in doubt, call the office on 01277 525 020 or send details through our quote form and we’ll say what we think.
Joints and surfaces we work on
- Construction joints
- Loading bays
- Retail and showroom floors
- Forklift and pallet-truck routes
- Joints along racking aisles
- Saw-cut induced joints
Joints that move: notes for Woking
At least three named trading, business or retail sites lie within about 3 miles of Woking. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. Woking is about 24 miles from central London. The roads out of London are lined with trade parks and distribution sheds.
Another example is Lion Retail Park, 1.4 miles east of Woking, where floors and yards would be done in stages around the occupiers. If you manage units on an estate such as Goldsworth Park Trading Estate, 0.8 miles north-west of Woking, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch. In a school such as Goldsworth Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Woking is about 24 miles south-west of London, in Surrey. Our applicators travel to Woking for work on floor joints. Across Surrey, 379 places are covered, including Woking. For work in that direction, see our Reading page (20 miles or so).
If you need floor joint sealing in GU21, GU22, GU24 and GU3, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on High Street, Market Walk and Gloucester Square. Main routes into Woking include the A247 and A320, which helps when planning parking and deliveries for the job. Close to Woking, our area also takes in Goldsworth Park (1 mile west), St John's (1 mile west), Horsell (1 mile north-east), Westfield (1 mile south-east) and Mimbridge (2 miles north). Bigger towns within reach include Guildford (5 miles south), Camberley (7 miles west), Epsom (13 miles east), Farnham (12 miles south-west), Ewell (14 miles east) and Egham (8 miles north). Woking is one of the busier places in Surrey, and we take on floor joints for its commercial and public buildings.
What’s near Woking
Recent enquiries here include premises near The Red Lion pub, Woking High School and Hoe Valley Linear Park and the streets around them. The nearest railway station is Woking station, roughly 0.7 miles east. Nearby you’ll also find The Peacocks (0.6 miles east) and The Hockey Museum (0.7 miles east). Green spaces nearby include Brookwood Lye.
Different surfaces, different methods
Flexible floor sealants
Polyurethane sealants suit floor joints with larger movement. They give less edge support than semi-rigid fillers so they are used where movement matters more than wheel load.
Isolation joints at walls and columns
Where racking or plant sits near column joints, access is agreed before we start.
Looking after the joints
Problems stay small when the joints are checked regularly. Specifically:
- Ask drivers not to drag forks or pallets
- Check joint lines on busy aisles regularly
- Plan for a top-up on newer floors
- Clear packed debris from open joints regularly
Problems inside the 12-month guarantee period are ours to put right. Beyond that, an inspection once or twice a year catches failing joints early.
Joints are easiest to look after when someone checks them regularly. A phased plan, worst routes first, spreads the work out and keeps on top of the rest.
How a job runs
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. For premises in central Woking, deliveries and parking need a bit of planning, while out-of-town estates usually have yards and car parks. Let us know what’s there when you send details.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
What we need from you
- Flag any permit to work we will need
- Tell us your opening times and when work is allowed
- Confirm the product named in the specification
Getting a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photos and a description will do.
Advice
Your questions answered
Is a hospital such as Woking Community Hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Is Goldsworth Park Trading Estate, near Woking, within your area?
Yes. Estates, retail parks and business parks around Woking, Goldsworth Park Trading Estate among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Can you send site paperwork?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Should floor joints be filled or sealed?
There isn’t one answer for a whole floor. Hard wheels need edge support, which points to a semi-rigid filler, and movement joints or perimeters need something flexible. The quote sets out what goes where.
Is the floor joint work guaranteed?
Our workmanship carries a 12-month guarantee and the work is covered by public liability insurance.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
What sets the cost
Quotes vary with the job. It mainly depends on:
- Whether old sealant has to be cut out first
- Induction, permit and paperwork requirements
- How much there is to seal
- Location, for remote and island sites
A quote for floor joints depends on quantities, condition and access, plus any specification you are working to. Call for a quote.
What we need to price the job
Good information means a firmer quote. Helpful details to send:
- Any specification or named product
- Photos of the joints, close up and from further back
- Drawings or a marked-up plan, if available
- Any dates the work must fit around
To get a fixed quote, speak to us on 01277 525 020 or send photos by email with the site address and an outline of the work. You can also send details through our quote form.