Shere commercial sealant contractors
Need commercial sealant contractors in Shere? It’s simple: send details, get a quote, we seal, guaranteed.
- Sanitary sealant that has gone black and patchy
- Gaps behind commercial kitchen worktops and sinks
- Leaks that seem to come through a sealant line
Need commercial sealant contractors in Shere?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Different surfaces, different methods
Facade and cladding joints
On a facade, a failed joint is often only visible close up. Close-up photos or a site visit tell us what’s needed, and we will confirm the colours available for the specified product.
Commercial kitchens and tea points
A smooth, continuous joint is easier to keep clean. Work is timed around the hours you give us so the kitchen isn’t out of use longer than needed.
How we handle commercial sealant contractors in Shere
If you look after more than one building, a single sealant contractor saves a lot of chasing. We take on one-off reseals, runs of jobs across a portfolio and planned maintenance programmes: details in, a fixed quote back, the sealing done, then our 12-month guarantee. To get a programme moving in Shere, give us a call on 01277 525 020 or email us with the site addresses. Site teams most often ask us about damp patches where an external joint has failed and hardened, chalky sealant on south-facing or exposed elevations, on movement joints in walls and floors, floor and threshold joints and window and door perimeters. One point of contact handles commercial sealant work in Shere from the first photographs to the final walk-round, whether it’s one building or several.
A lot of what we do in Shere is replacing sealant that has done its years: split, chalky or peeling, with leaks or mould starting behind it.
Rural business units near smaller places such as Shere are frequently converted agricultural buildings. Their mix of old walls with new frames, partitions and floors means many joints between unlike materials, and a sealant colour that suits the building’s character is often part of the brief.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Shere (GU5)
- Region
- Surrey
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Common problems we fix in Shere
No sealant joint is permanent. Its life comes down to movement, UV and weather, how it’s cleaned, how much traffic passes it and what was used in the first place. In commercial buildings those factors tend to act together.
Common reasons buildings call us in:
- Layers of sealant, all of them failing
- Messy, uneven beads from earlier work that let the building down
- Shrunken sealant along kitchen worktops and splashbacks
- Window and door perimeter joints that have cracked open
A lasting commercial joint around Shere begins with the old bead fully out and the faces clean and dry.
What to look for in a quote
- Their pre-qualification and accreditations
- What level of public liability insurance do they hold?
- Can the work be phased to keep areas open?
- Whether their applicators hold CSCS cards
Questions we’re asked in Shere
What site paperwork comes with a job in Shere?
We’ll confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
Can you supply sealant in our brand colour for a site in Shere?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Send colour references or photos and we will confirm what’s available for the product.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
What guarantee do you give on resealing?
The work is guaranteed for 12 months. Should a joint we sealed give trouble during those 12 months, let us know and we will look at it.
Is Shere in your area?
Yes. We take on work across Shere, with one number for every area we cover.
Do you work for facilities managers and managing agents?
Yes. A large share of our work comes through facilities managers, managing agents and landlords, alongside main contractors. Tell us how you issue work and we’ll fit in.
Is the old sealant taken out first?
Full removal is part of every quote. Sealing over traps water and lifts once the joint moves.
Shops, offices and hotels in and around Shere
Shere sits in one of the drier corners of the country, the South East. Drier doesn’t mean dry every day, so frontage work still has some give in the dates. Central London is about 25 miles from Shere. This part of the South East is dense with business parks and out-of-town offices. Occupiers with several premises in the region tend to prefer one contractor and one point of contact.
Shops and cafés around stations like Gomshall station (1.1 miles east of Shere) trade from early, so work is timed around them.
Shere is about 5 miles east of Guildford, in Surrey. Any commercial site in Shere is covered. Shere is one of 379 places we cover in Surrey. Sites around London have their own page, about 25 miles away.
Work on sealant joints is covered throughout GU5, for business premises of every kind. Among the streets we cover are Lower Street, Orchard Road and Shere Lane, and sites on any of them can send details for a fixed quote. If your building is just outside Shere, we cover Gomshall (1 mile east), Albury Heath (1 mile south-west), Little London (1 mile south-west), Albury (1 mile west) and Abinger Hammer (1 mile east). Bigger towns within reach include Guildford (5 miles west), Woking (8 miles north-west), Camberley (14 miles north-west), Epsom (12 miles north-east), Horley (13 miles east) and Redhill (13 miles east).
Local landmarks in Shere
In Shere, that means premises near Colekitchen Down and The White Horse Public House. Shere’s nearest station is Gomshall station, roughly 1.1 miles east. Well-known places in the area include Shere Museum (under half a mile east) and Abinger Castle (2.8 miles south-east). Not far away are Silent Pool and St Martha's Hill.
Honest limits
Before quoting, we check that sealant is the right answer. It won’t put right:
- Faulty windows rather than failed perimeter sealant
- Roof leaks that only look like a joint problem
- Leaks from pipework, wastes or valves (that’s plumbing)
If in doubt, call 01277 525 020 or email the details over and we’ll say what we think before you book.
Where we work in Shere
- External facade joints
- Washrooms and tea points
- Floor and threshold joints
- Window and door perimeters
- Kitchen worktops and splashbacks
- Movement joints in walls and floors
Cost factors for sealant joints
The price varies from site to site. It mainly depends on:
- Access and working height
- The total length or number of joints
- Which sealant the job calls for
- Distance, for remote addresses
The specified product makes a difference, and so does the preparation. Access, phasing and site rules also count.
Sending details for a quote
We can often quote from photos and a few details. It helps to include:
- Where the site is, with the postcode
- Specification clauses that apply
- The type of building and who uses it
- Drawings or a marked-up plan, if available
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call the office on 01277 525 020 or send details through our quote form.
From enquiry to sign-off
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Smaller jobs around Shere can be grouped with others nearby, which keeps travel down. You’ll have a fixed quote before work starts.
- First, details come to us: photos, drawings or a schedule of the areas, or we arrange a site visit.
- Next comes a diagnosis and a fixed quote.
- Site hours, access windows and the order of areas are agreed before we start.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- We fit backing to the right depth, prime where specified and lay the new bead.
- Finished joints are checked with you and handed over with our 12-month guarantee.
Preparing the site
- Send your site hours and access windows
- Agree which areas must stay open
- Clear stock, furniture or equipment away from the joints
Getting a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Read more
Towns and villages near Shere
Also in Shere
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Share these points with them:
- Look at the sealant around anything that has been moved or replaced
- Act on the first lifting edges rather than waiting
- Log reseals in the O&M or maintenance records
- Check sealant as part of routine building inspections
Add the resealed joints to your planned maintenance inspections. A periodic look catches splits and lifting edges early, especially on exposed elevations and in washrooms. If anything looks wrong, phone 01277 525 020 or email us with a photo.
Each spell of wet weather pushes more water through an open joint. Behind a panel or frame, that water can sit unseen for a long time. Catching it at the sealant stage avoids the bigger repair.