Floor Joint Sealing in Possilpark
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Possilpark and the surrounding area. Send photos or drawings for a fixed quote.
- Drivers complaining about joints on a route
- Open saw cuts full of debris
- Old filler gone hard, cracked or loose
Floor joint sealing across Possilpark
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floor joint sealing in Possilpark
Sometimes the concrete either side of a joint has already spalled. A filler laid against broken edges has nothing sound to grip, so we will tell you if the joint edges need repairing first and leave that decision with you. If you are dealing with filler that has parted from one face and cracked and crumbling joint fill, we can help. Whether you call it commercial sealant work, mastic application or joint sealing, in Possilpark it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Scotland’s cities have multi-storey car parks, shopping centres, university and hospital estates, all with movement joints in decks, floors and walls. When the sealant goes, water and grit get in, and a Scottish winter makes it worse.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Where
- Possilpark (G22, G20, G21)
- Region
- Glasgow
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
What affects the price in Possilpark
Before we quote, we look at:
- Induction, permit and paperwork requirements
- Location, for remote and island sites
- Any access equipment needed
- Specialist products, such as fire-rated or hygienic sealants
What a job costs comes down to the quantity of joints, how much old material needs removing and the access. Call for a fixed quote when you’re ready.
What we need to price the job
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Any dates the work must fit around
- Photos of the joints, close up and from further back
- Approximate linear metres or a joint schedule
- Whether the building will be occupied during the work
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
Common questions from Possilpark clients
Can you take on a job at a hospital such as Stobhill Hospital?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you work at a site such as Cowlairs Industrial Estate, by Possilpark?
Yes. Estates, retail parks and business parks around Possilpark, Cowlairs Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Why has the filler pulled away from one side?
Young concrete carries on shrinking for a long time, so a semi-rigid filler can part from one face. It is usually dealt with by topping up.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
Do you work in Possilpark?
Yes. Sites across Possilpark are covered, with one number for every area we cover.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Are you insured?
Yes. We’re fully insured, including public liability cover.
For managing agents and facilities managers
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
What the job involves on each surface
Retail and showroom floors
Retail joints see trolleys, footfall and scrubber-driers. The product is chosen for that traffic and the finish matters as much as the performance.
Semi-rigid joint fillers
If a joint is still opening, a semi-rigid filler may part from one face. That is normally dealt with by topping up later, and we will explain it when we quote.
How a job runs
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. Work on a big city site in Scotland usually involves inductions and permits. Tell us the rules and we will work to them.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- We extract the dust and prime the faces if the product needs it.
- The joint is filled to its specified depth and trimmed level.
- We hand each phase back when it can take traffic.
What we need from you
- Share the asbestos register for older buildings
- Tell us your opening times and when work is allowed
- Agree which areas must stay open
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to give us a call on 01277 525 020 or email drawings and photos with what you know.
Related advice
Warehouse floors and decks around Possilpark
Possilpark is on Scotland’s wetter western side. External slab joints left open take plenty of rain. Dry spells are used for the external joints. At least three named trading, business or retail sites lie within about 3 miles of Possilpark. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
For an estate such as Stobhill Hospital (1.3 miles north-east of Possilpark), the joints in ramps, decks and long building elevations all need attention over time. At places like Oakbank Industrial Estate, 0.8 miles to the south-west of Possilpark, joints are sealed a section at a time so operations carry on. Warehouse floors on estates like Cowlairs Industrial Estate, under half a mile to the east of Possilpark, carry pallet trucks and forklifts over every saw-cut joint.
Possilpark is about 2 miles north-east of Hillhead, in Glasgow. Across the G22 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 171 places across Glasgow fall within our area, including Possilpark.
Commercial sites across G22, G20 and G21 are covered. If your site is on Walnut Road, Balmore Road and Drumfearn Road or close by, send details and we’ll quote for floor joints. You’ll find Possilpark on or near the A879. If your building is just outside Possilpark, we cover Parkhouse (1 mile north), Cowlairs (1 mile south-east), Hamiltonhill (1 mile south-west), Ruchill (1 mile west) and Lambhill (1 mile north-west). Further afield, our area takes in Langside (4 miles south), Yoker (5 miles west), Mount Florida (4 miles south), Hillpark (5 miles south), Shawlands (4 miles south) and Temple (3 miles west).
Around Possilpark
In Possilpark, that means premises near College of Piping, Andersonian Library and Springburn Park and the streets around them. Possilpark has its own railway station: Ashfield station. Other landmarks nearby include Chinatown (1.2 miles south) and Ruchill Hospital (0.5 miles west). Not far away are Hogganfield Loch and Lenzie Moss.
Keeping the joints sound
Keep the joints in good shape with a few simple steps:
- Check joint lines on busy aisles regularly
- Respect the cure time before traffic returns
- Keep grit out of unfilled joints in the meantime
- Stop forks and pallets being dragged across joints
Normal floor cleaning is fine once the product has cured. Tell us about aggressive cleaning products or hot washing at quote stage so we choose something that tolerates them.
Regular inspection catches failing fills before the edges go. We can quote a programme that starts with the busiest areas so nothing is left to fail.
Why act early in Possilpark
Painting or coating straight over joints rarely lasts. Joints need their own treatment before or alongside any coating work. Scottish city buildings take plenty of rain, so a split or hardened joint lets water into the wall. Resealing promptly protects the stone and the interior.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Why clients in Possilpark choose us
- A Constructionline member, so easy to vet
- CHAS accredited
- Fully insured, including public liability cover
- Joints cleaned back to sound surfaces