Industrial and floor joint sealing in Temple, Glasgow
Floor joint sealing and filling in warehouses, factories and industrial units across Temple, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Scruffy, dirty joint lines on a shop or showroom floor
- Cracked and crumbling joint fill
- Loading bay joints breaking down
Floor joint sealing for Temple sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle floor joint sealing in Temple
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Pricing depends on the length of joint, how worn the edges are and when we can get in, and the quote is fixed before we mobilise. If you are dealing with loading bay joints breaking down and joint fill separating from the concrete, we can help, whatever the surface. Most enquiries from Temple start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
In Scotland’s cities, buildings from car parks and malls to university and hospital estates rely on movement joints. When the sealant goes, water and grit get in, and a Scottish winter makes it worse.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Location
- Temple (G13, G12, G61)
- Wider area
- Glasgow
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Aftercare for building managers
To get the most from the new sealant:
- Stop forks and pallets being dragged across joints
- Hold traffic back until the product has cured
- Clear packed debris from open joints regularly
- Treat loading bay joints first if they’re failing
Once cured, the joints get cleaned along with the slab. Tell us about aggressive cleaning products or hot washing at quote stage so we choose something that tolerates them.
A broken joint on a main route is crossed by every truck on that route. Early treatment protects wheels, loads and drivers as much as the floor.
Common questions from Temple clients
Does a site in Temple have to shut while its joints are sealed?
Normally not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we will plan from there.
Can you take on a job at a hospital such as Gartnavel Royal Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Is Temple in your area?
Yes. Temple is in our area, within our coverage of Greater London, South East England and Scotland. For a quote, ring 01277 525 020 or email us.
Should floor joints be filled or sealed?
We decide joint by joint. Where hard wheels cross, a semi-rigid filler is typically right, and movement joints or perimeters need something flexible. The quote sets out what goes where.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Common problems we fix in Temple
A soft, flexible sealant on a forklift route can’t hold the arrises up and the edges fail regardless. It can go the other way too: a stiff filler in a joint that keeps moving splits or comes away from the sides.
Look out for the following:
- Cracked and crumbling joint fill
- Chipped and spalling edges along forklift routes
- Flexible sealant torn out by wheels
- Grimy joint lines spoiling a showroom floor
Estates like Anniesland Industrial Estate (0.5 miles north of Temple) combine warehouse slabs, yards and loading bays, all with joints under wheels.
What to look for in a quote
- How they handle RAMS and site documents
- How they’ll work around occupants
- Their pre-qualification and accreditations
- Their approach to joint depth and backing
Our process
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself usually takes a day for smaller units, with bigger warehouse floors programmed over several visits, and we clear our waste as we work. For premises in Temple, tell us about access times, shared entrances and any building rules, so the work can be phased and areas kept in use.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
Getting the site ready
- Share the asbestos register for older buildings
- Let us know about inductions and permits
- Clear stock, furniture or equipment away from the joints
Request a quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or email the details over.
Read more
Places near Temple
Also in Temple
Work for main contractors and building owners
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, so there’s one set of paperwork to deal with.
What we can’t put right
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Level or flatness problems across the floor
- Slab panels that rock or move under load
- Wide or random cracking that suggests a structural issue
If you are not sure, just ring 01277 525 020 or email the details over and we will give you a straight answer.
Where we work in Temple
- Saw-cut induced joints
- Construction joints
- Retail and showroom floors
- Joints along racking aisles
- Loading bays
- Forklift and pallet-truck routes
Joints that move: notes for Temple
The 3 miles around Temple take in at least three named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. The west of Scotland, where Temple is, gets more rain than the east. Open joints in external slabs take a lot of water. We wait for dry, workable days to seal them.
University campuses such as University of Glasgow Garscube Campus, 0.8 miles to the north-east of Temple, have car parks, paved walkways and building elevations with movement joints. Across sites such as Dalsholm Industrial Estate, 0.8 miles to the east of Temple, floor and movement joints can be sealed in phases so units keep working.
Temple is about 3 miles north-east of Renfrew, in Glasgow. Commercial clients in Temple use us for work on floor joints. Temple is one of 171 places we cover in Glasgow.
Anyone looking for floor joint sealing in G13, G12 and G61 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. If your site is on Fern Lane, Ilay Road and Ryvra Road or close by, we can quote for floor joints. Temple sits on or close to the A82. We also cover Anniesland Cross (1 mile south), Anniesland (1 mile south-west), Netherton (1 mile north), Knightswood (1 mile west) and Kelvindale (1 mile east) for floor joints. Bigger towns within reach include Glasgow (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (5 miles south-east), Blythswood Hill (3 miles south-east) and Langside (5 miles south).
What’s near Temple
In Temple, that means premises near Glasgow University Library, Jordanhill College and Lock 27 pub. There’s a railway station in Temple itself: Anniesland station. A little further out are Glasgow Museum of Transport (2.1 miles south-east) and Partick Castle (1.9 miles south-east). Green spaces nearby include Kilmardinny and Castle Hill.
Why deal with it now?
Broken joints shake trucks, stock and operators alike. That means extra wear on wheels and a rougher ride for staff, adding costs nobody plans for. A properly filled joint smooths the route. In Temple, as across Scotland, rain finds any gap, so a split or hardened joint lets water into the wall. Resealing promptly protects the stone and the interior.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why us?
- CHAS accredited
- Failed material removed, not covered up
- Work carried out by CSCS-carded applicators
- Constructionline member
See how commercial sealant jobs are priced and how we’re accredited.