Possilpark expansion joint sealing
Commercial sealant work in Possilpark for contractors, FMs and building owners: expansion and movement joint sealing in walls, decks and floors, with a fixed quote first.
- Sealant peeling off one face of the joint
- Damp inside where a wall movement joint has failed
- Spalled or broken joint edges in floors and decks
Expansion joint sealing for businesses in Possilpark
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing for commercial buildings in Possilpark
Brickwork and blockwork walls have vertical movement joints at intervals, and they’re easy to miss until the sealant fails. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal comes out, backing goes in and a sealant with the right movement class is applied, primed where the manufacturer specifies. The enquiries we see most involve expansion joints filled with dirt and stones and weathered movement joint sealant that no longer flexes, on car park decks and ramps, brickwork movement joints and precast concrete panel joints. Most enquiries from Possilpark start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Older stone buildings in Scotland’s cities often have later extensions, with movement joints where old meets new. Those joints need a sealant with the right movement capability, sized to the gap.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Possilpark (G22, G20, G21)
- Region
- Glasgow
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
What we’re called out for in Possilpark
Car park decks and floors face loads that walls never see. Tyres and wheels press on the edges and the sealant, while grit and salts work into any gap. The product has to be suited to the traffic.
What tends to prompt an enquiry:
- Water getting into the wall through a failed joint
- Leaks through car park deck joints onto the level below
- Torn sealant in brick or block movement joints
- Sealant pulling off the joint face
For estates staff at a university like Glasgow Caledonian University, 1.3 miles south of Possilpark, building and paving joints are part of the planned maintenance list.
Comparing quotes
- Which product they’ll use, and why it suits the joint
- Are they CHAS accredited or on Constructionline?
- How they’ll work around occupants
- How the joint faces will be prepared and primed
Surface by surface
Brickwork and blockwork joints
A brick movement joint full of old mortar or debris can’t close. Everything is raked out before backing and sealant go in and flag any joint that seems undersized.
Joints between different materials
Hybrid or MS polymer sealants bond to many substrates. We pick the product for the materials and the movement, and confirm it in the quote.
Warehouse floors and decks around Possilpark
At least three named trading, business or retail sites lie within about 3 miles of Possilpark. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. The west of Scotland, where Possilpark is, gets more rain than the east. Rainwater through open yard and deck joints is a bigger issue here than in the drier east. Outside joints are sealed in dry spells, so dates have some give.
Retail centres such as St Rollox Business and Retail Park, 1.2 miles to the south-east of Possilpark, have floors, service yards and car parks with joints under constant traffic. Across sites such as Oakbank Industrial Estate, 0.8 miles south-west of Possilpark, floor and movement joints can be sealed in phases so units keep working.
Possilpark is about 2 miles north-east of Hillhead, in Glasgow. Anywhere in G22, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 171 places in Glasgow.
We cover the G22, G20 and G21 postcode districts for movement joints. Buildings on Walnut Road, Balmore Road and Drumfearn Road are within our area for movement joints. Possilpark sits on or close to the A879. If your building is just outside Possilpark, we cover Parkhouse (1 mile north), Cowlairs (1 mile south-east), Hamiltonhill (1 mile south-west), Ruchill (1 mile west) and Lambhill (1 mile north-west). Nearby towns on our patch include Langside (4 miles south), Yoker (5 miles west), Mount Florida (4 miles south), Hillpark (5 miles south), Shawlands (4 miles south) and Temple (3 miles west).
What’s near Possilpark
Around Possilpark, our work takes us to commercial buildings near College of Piping, Andersonian Library and Springburn Park. There’s a railway station in Possilpark itself: Ashfield station. A little further out are Chinatown (1.2 miles south) and Ruchill Hospital (0.5 miles west). Open spaces near Possilpark include Hogganfield Loch and Lenzie Moss.
Questions about Possilpark
Will our site in Possilpark have to close for joint sealing?
Usually not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
Can you take on a job at a hospital such as Stobhill Hospital?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
What’s the difference between an expansion joint and a movement joint?
The general name is movement joint, and expansion joint is one common type. In everyday use the two names are often swapped.
Do you reseal car park expansion joints?
Yes. We use a sealant designed for wheel loads and the expected movement.
Why do our movement joints keep failing?
Normally the joint is moving more than the sealant can take. We review the joint design as well as the sealant before pricing.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Give us the access times and building rules for your premises in Possilpark, and we will plan the work to suit, phased where areas need to stay in use.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
What we need from you
- Send asbestos survey details if the building is pre-2000
- Flag any permit to work we’ll need
- Tell us your opening times and when work is allowed
Getting a fixed quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. For a chat about it beforehand, call the office on 01277 525 020 or email us.
Advice
Other services in Possilpark
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
General trades versus a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Why act early in Possilpark
Doing joint resealing alongside other planned works can save on access. Leaking joints need sealing now, as damage continues meanwhile. We can split the scope into urgent and planned. In a tenement or shared city building, water from a failed joint can reach other owners’ property, which makes early repair simpler for everyone. Acting early avoids disputes and bigger repairs.
What a job costs comes down to the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote when you’re ready.
Why us?
- RAL and finish matching where the product range allows
- Coloured sealants to suit the setting, where available
- Work to your specification and the manufacturer’s guidance
- One number for every site we cover
See how commercial sealant jobs are priced or our accreditations and insurance.