The Mastic Doctor team standing beside their branded vans outside an office building
Surrey · England

Pixham floor joint sealing

Floor joint sealing for Pixham, from a contractor working since 2005. Fully insured and CHAS accredited.

  • Joint fill separating from the concrete
  • Scruffy, dirty joint lines on a shop or showroom floor
  • Flexible sealant torn out by wheels
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
London, the South East & Scotland
CHAS accredited
£5m public liability

Need floor joint sealing in Pixham?

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Leave it or put it right?

Holding off until the whole floor can close can take a long time. Zone by zone, the worst aisles can be dealt with now and the remainder follows on a plan that suits you. Older rural buildings around Pixham move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.

Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.

What you get with us

  • Workmanship guaranteed for 12 months
  • A Constructionline member, so easy to vet
  • One contact handling all your sites
  • A fixed quote before work starts

See what affects the cost and our accreditations.

About our floor joint sealing in Pixham

For sites in Pixham and across Surrey, the process is short: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. A rough length of joint, photographs of the worst areas and a site plan let us give a quick quote and a visit can be arranged where that is easier. We work on forklift and pallet-truck routes, saw-cut induced joints and retail and showroom floors, and the usual reasons a site gets in touch are flexible sealant torn out by wheels and a rough ride across broken joints. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Pixham, that means joint design, primers and backing rod as standard.

Halls, schools and small commercial buildings near places like Pixham have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.

Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.

Mastic Doctor team members lined up next to their branded vans outside an office building
Place
Pixham (RH4, RH5)
Wider area
Surrey
Cover
A 12-month guarantee
Price
Quoted before any work starts
Phone
01277 525 020
Last updated
3 November 2026

How the job changes by surface

Saw-cut induced joints

Open saw cuts collect grit and break at the arris. Filled in good time, they stay narrow and neat.

Retail and showroom floors

Retail joints see trolleys, footfall and scrubber-driers. We pick a filler or sealant to suit and the appearance is part of the brief.

How a job runs

We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact. Smaller jobs around Pixham can be grouped with others nearby. A fixed quote is given before anything starts.

  1. A floor survey records every joint, its edges and what crosses it.
  2. You receive a fixed quote showing products and phasing.
  3. Each joint is cut or routed back to clean, sound concrete.
  4. Dust is vacuumed out and primer applied where specified.
  5. The joint is filled to its specified depth and trimmed level.
  6. Zones reopen once cured and the work moves on.

Getting the site ready

  • Let us know about inductions and permits
  • Agree which areas must stay open
  • Warn occupants and staff about the work

Request a quote

A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or call 01277 525 020 or email us if you’d rather talk the job through.

Get a price

Related advice

General trades versus a specialist

For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.

The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.

What sets the cost

Quotes vary with the job. Expect it to depend on:

  • Whether old sealant has to be cut out first
  • The total length or number of joints
  • Which sealant the job calls for
  • Site requirements such as inductions and permits

There’s no price list, since every building and every scope is different. Call for a quote.

What to include in your enquiry

Good information means a firmer quote. When you get in touch, include:

  • The type of building and who uses it
  • Photos of the joints, close up and from further back
  • Whether an asbestos survey exists
  • Approximate linear metres or a joint schedule

For a fixed quote, speak to us on 01277 525 020 or email a schedule or drawings. Our quote form is another easy route.

Keeping the joints sound

For the best life from the joints:

  • Photograph any joint that starts to chip
  • Expect fillers on young slabs to need a top-up
  • Put loading bays at the top of the list
  • Check joint lines on busy aisles regularly

Problems inside the 12-month guarantee period are ours to put right. Beyond that, an inspection once or twice a year catches failing joints early.

Joints are easiest to look after when someone checks them regularly. We can quote a programme that starts with the busiest areas so nothing is left to fail.

FAQs: Pixham

Does your area include sites such as Glebelands Centre Business Park, near Pixham?

Yes. Estates, retail parks and business parks around Pixham, Glebelands Centre Business Park among them, are all within reach. To start, just call the office on 01277 525 020 or email the details over with the unit, the joints involved and your access times.

Would you work within a site like Dorking Community Hospital?

Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.

Which is better for warehouse joints, filler or sealant?

There isn’t one answer for a whole floor. Where hard wheels cross, a semi-rigid filler is typically right and perimeter or movement joints need flexibility. The quote sets out what goes where.

Does the weather affect the work?

It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.

Can you fill joints where the arrises have spalled?

A filler needs sound edges to grip. We will tell you if the joint edges need repairing first, so you can decide how to proceed.

How do you deal with asbestos in old sealant?

Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.

Do you seal on top of existing sealant?

No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.

Warehouse floors and decks around Pixham

Central London is about 20 miles from Pixham. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift. Rainfall across the South East, Pixham included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in.

Business parks such as Glebelands Centre Business Park, 1.1 miles to the south-west of Pixham, have car parks, paved areas and long brick and panel elevations, all with movement joints. For a school such as The Ashcombe School, playground and building joints can be done in the holidays. Across sites such as Chapel Lane Industrial Estate, which lies south-west of Pixham, floor and movement joints can be sealed in phases so units keep working.

Pixham is about 1 mile north-east of Dorking, in Surrey. Looking for floor joint sealing in Pixham? We can help, as we do across Surrey. Pixham is one of 379 places in Surrey on our list. For work in that direction, see our London page, about 20 miles away.

If you need floor joint sealing in RH4 and RH5, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include London Road, Leslie Road and Pixham Lane, and sites on any of them can send details for a fixed quote. Sites close to Pixham are covered too, including Dorking (1 mile south-west), Westhumble (1 mile north-west), Ranmore Common (2 miles west), North Holmwood (2 miles south) and Mickleham (2 miles north). Bigger towns within reach include Guildford (11 miles west), Woking (12 miles north-west), Epsom (7 miles north), Horley (8 miles south-east), Redhill (7 miles east) and Ewell (8 miles north).

Near you in Pixham

In Pixham, that means premises near Pippbrook House, St Martin's CofE Controlled Primary School and Deepdene Terrace, among other places. There’s a railway station in Pixham itself: Dorking station. Nearby you will also find Headley Court (4 miles north-east) and Betchworth Castle (1 mile east). Open spaces near Pixham include Reigate Heath and Box Hill.

Map of Pixham © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.