Floor Joint Sealing in Newtonmore
Floor joint sealing and filling in warehouses, factories and industrial units in Newtonmore and across Highland. CHAS accredited and fully insured, with a 12-month guarantee.
- Broken arrises where pallet trucks cross
- Flexible sealant torn out by wheels
- Unfilled floor joints collecting dirt and grit
Floor joint sealing near Newtonmore
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing for commercial buildings in Newtonmore
Most industrial slabs are divided into panels by saw-cut joints and construction joints, and every one of those joints is an exposed edge under hard wheels. We fill or seal them with a product matched to the traffic and the movement, so the arrises are supported and grit stays out. We work on saw-cut induced joints, retail and showroom floors and forklift and pallet-truck routes, and the usual reasons a site gets in touch are a gap opening alongside old joint filler and open saw cuts full of debris. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Newtonmore, preparation and product choice get the time they need.
Travel to smaller places like Newtonmore is planned so the work is done in one trip where possible. Send photos, joint widths and details of the traffic first.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- Newtonmore (PH20)
- Wider area
- Highland
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
On site: what to expect
When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before any cutting starts, and the work normally takes a day or more, depending on the metres of joint and how many zones the floor is split into. For work around Newtonmore, we aim for one trip, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- Zones reopen once cured and the work moves on.
What we need from you
- Point out any areas we must not close
- Send any specification or drawings in advance
- Tell us your opening times and when work is allowed
Get a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, speak to us on 01277 525 020 or email a schedule or drawings.
Read more
More services for Newtonmore
Owners, agents and contractors
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Joints that move: notes for Newtonmore
Newtonmore is on Scotland’s wetter western side. Open joints in car parks and yards let in more water than in drier areas. Dry spells are used for the external joints.
On industrial estates such as Newtonmore Industrial Estate (under half a mile south-east of Newtonmore), saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic. Hospitals like St Vincent's Hospital, 2.9 miles to the north-east of Newtonmore, have multi-storey or surface car parks whose joints carry vehicles round the clock.
Newtonmore is about 28 miles south of Inverness, in Highland. Across the PH20 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Newtonmore is one of 256 places in Highland on our list. Dundee is covered too, around 60 miles from Newtonmore.
Postcode districts covered here: PH20 for floor joints. If your site is on Station Road, Main Street and Old Glen Road or close by, we can quote for floor joints. Access to Newtonmore is via the B9150 among other routes. Close to Newtonmore, our area also takes in Kingussie (3 miles north-east), Etteridge (4 miles south), Laggan (7 miles south-west), Gergask (7 miles south-west) and Kincraig (9 miles north-east). Where a site is remote or on an island, travel and materials need planning ahead, so the full address helps from the start.
Landmarks near Newtonmore
There’s a railway station in Newtonmore itself: Newtonmore station. A little further out are St Vincent's Hospital (2.9 miles north-east) and Clan Macpherson Museum (under half a mile south). Not far away are Creag Bheag and Loch an Dabhaich.
Quoting for work in Newtonmore
A fixed quote reflects the actual work. It allows for:
- Whether the work must be split into stages
- The site’s rules and procedures
- Which sealant the job calls for
- Travel to remote or island sites
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Details that help us quote
There’s no need for a formal survey. A few details are enough to get going:
- Your programme or deadline
- Rough lengths or quantities, or drawings if you have them
- What the building is and how it’s used
- The product your specification calls for
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Your questions answered
Is Newtonmore too far out for you?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Do you cover business parks and estates near Newtonmore, such as Newtonmore Industrial Estate?
Yes. We cover Newtonmore and the area around it, including industrial estates, business parks and retail parks such as Newtonmore Industrial Estate. To start, just phone 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
What do you need from us to quote?
Approximate metres of joint, photos of typical and worst areas, and a floor plan let us give a quick quote. We can visit where that helps so give us a call on 01277 525 020 or send photos by email to set one up.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Do you guarantee industrial floor joints?
A 12-month guarantee covers the work we do. It covers our workmanship, not later slab movement or damage from impacts.
Maintenance after handover
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:
- Sweep debris out of open joints until they can be filled
- Put loading bays at the top of the list
- Respect the cure time before traffic returns
- Stop forks and pallets being dragged across joints
Young concrete carries on shrinking, so some fillers part slightly from one face. It is a known trait of new floors and a later top-up deals with it in the majority of cases.
Regular inspection catches failing fills before the edges go. We can quote a programme that starts with the busiest areas and keeps on top of the rest.
Different surfaces, different methods
Retail and showroom floors
Shop and showroom floors often have exposed slab joints, especially with polished or coated concrete. We aim for a tidy, flush finish that suits the floor and confirm which colours the product comes in.
Flexible floor sealants
Movement joints, joints at walls and joints in lightly trafficked areas often take a flexible sealant. Backing rod limits how deep the bead goes and keeps it off the joint bottom.
What sealant work can’t fix
Some faults sit outside our scope, and we say so rather than covering them up:
- Slab panels that rock or move under load
- Worn screed or surface finishes
- Wide or random cracking that suggests a structural issue
Not sure which it is? You can ring 01277 525 020 or email us and we will tell you honestly before you book.
Surfaces we seal
- Joints along racking aisles
- Saw-cut induced joints
- Loading bays
- Forklift and pallet-truck routes
- Construction joints
- Retail and showroom floors