Industrial and floor joint sealing in Etteridge, Highland
Floor joint sealing and filling in warehouses, factories and industrial units in Etteridge and across Highland. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Failing joints at loading bays and dock doors
- Open saw cuts full of debris
- Joint fill separating from the concrete
Need floor joint sealing in Etteridge?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our floor joint sealing in Etteridge
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Each job is priced from the metres of joint, their condition and the access windows we get and the figure is fixed before work begins. We work on retail and showroom floors, loading bays and saw-cut induced joints, and the usual reasons a site gets in touch are scruffy, dirty joint lines on a shop or showroom floor and joint fill separating from the concrete. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Etteridge it comes down to the same thing: the right product in a properly prepared joint.
Travel to smaller places like Etteridge is planned so the work is done in one trip where possible. Photos, approximate widths and what uses the floor help us bring the right materials.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Where
- Etteridge (PH20)
- Region
- Highland
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Owners, agents and contractors
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Etteridge. Several sites can go on one quote, which keeps the paperwork simple.
Where floor joints take the most wear near Etteridge
The west of Scotland, where Etteridge is, gets more rain than the east. Open joints in external slabs take a lot of water. External sealing is booked for dry spells, with some give in the dates.
For floors and slabs around Etteridge, the product is chosen for the traffic and the movement at each joint. Once a joint near Etteridge opens up, grit and water get in and the edges start to break.
Etteridge is about 32 miles south of Inverness, in Highland. If you’re looking for floor joint sealing in Etteridge, we can help. Etteridge is one of 256 places we cover in Highland. There’s a separate page for Dundee, about 58 miles away.
Postcode districts covered here: PH20. Close to Etteridge, our area also takes in Newtonmore (4 miles north), Laggan (4 miles west), Gergask (5 miles west), Dalwhinnie (6 miles south-west) and Kingussie (7 miles north-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you phone 01277 525 020 or email drawings and photos.
Around Etteridge
The closest station to Etteridge is Newtonmore station, about 4 miles north-east of the centre. Nearby you’ll also find Cluny Castle (2.7 miles west). Not far away are Loch Cuaich and Creag Bhuidhe.
Why deal with it now?
Open joints are where dirt collects, out of reach of the floor cleaner. In shops, showrooms and clean production areas that matters for hygiene and appearance. Filled joints are far simpler to keep clean. For buildings near Etteridge, dealing with all the failing joints at once saves return trips. Send photos and we will quote for everything together.
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why clients in Etteridge choose us
- Work to your specification and the manufacturer’s guidance
- Old sealant cut out, never sealed over
- CHAS accredited
- Fully insured, including public liability cover
Take a look at how commercial sealant jobs are priced and our accreditations.
Nearby places to Etteridge
More services for Etteridge
Surface by surface
Construction joints
Day joints sit where one section of slab was cast against another. They often see more movement than sawn joints, and that shapes the product choice.
Isolation joints at walls and columns
Joints at walls and columns are often missed when floors are sealed, and they collect dust and debris. We include them in the survey.
Our process
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself typically taking between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. Jobs near Etteridge are often grouped with others in the same area. Let us know if your dates have any give.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- We tell you when each zone can carry trucks again and move on to the next.
Before we start on site
- Have the specification and drawings to hand
- Explain the parking and delivery arrangements
- Clear stock, furniture or equipment away from the joints
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Read more
Common questions from Etteridge clients
Is Etteridge too far out for you?
No. Small places get the same service as large ones. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.
What documents will you need to give us for a job in Etteridge?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
Do you use semi-rigid filler or flexible sealant on floor joints?
There isn’t one answer for a whole floor. Hard wheels need edge support, which points to a semi-rigid filler, and movement joints or perimeters need something flexible. You will see the choice for each area in the quote.
Do you repair broken joint edges?
We check the edges as part of the survey. Where they have broken away, we will tell you before quoting the filling, so nothing is filled that won’t hold.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Site staff or a sealant specialist?
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
What affects the price in Etteridge
Your fixed quote is built from the real scope. It allows for:
- How accessible the joints are
- Which sealant the job calls for
- Location, for remote and island sites
- Phasing around occupants
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
What to include in your enquiry
The more we know, the firmer the quote. Helpful details to send:
- Any specification or named product
- Whether the building will be occupied during the work
- Rough lengths or quantities, or drawings if you have them
- How the joints are reached, and at what height
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.