Floor Joint Sealing contractors in Lownie Moor
Floor joint sealing and filling in warehouses, factories and industrial units in Lownie Moor. CHAS accredited and fully insured, with a 12-month guarantee.
- Failing joints at loading bays and dock doors
- Filler that has parted from one face
- Drivers complaining about joints on a route
Floor joint sealing across Lownie Moor
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing for commercial buildings in Lownie Moor
Most industrial slabs are divided into panels by saw-cut joints and construction joints, and each joint line is a weak edge that wheels run over all day. We fill or seal them with a product matched to the traffic and the movement, so the arrises are supported and grit stays out. We work on forklift and pallet-truck routes, joints along racking aisles and retail and showroom floors, and what we’re called in for most is old filler gone hard, cracked or loose and joint fill separating from the concrete. A single leaking joint is often how a building in Lownie Moor first comes to us: we look at the rest while we are there and tell you what we find.
For outside joints near Lownie Moor, the Scottish weather sets the timetable: dry faces and the right temperature are essential, so dates have some give. Internal floors can be done whenever suits the site.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Lownie Moor (DD8)
- Region
- Angus
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Questions about Lownie Moor
Can you take on a job at a hospital such as Forfar Infirmary?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Does your area include sites such as Restenneth Business Park, near Lownie Moor?
Yes. Our area takes in Lownie Moor and its surroundings, with estates and business parks such as Restenneth Business Park included. Photos and a short description are enough for a first look.
How soon can traffic go back on the floor?
Cure times vary with the product and the conditions. You’ll get a reopening time for each area when we agree the phasing.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Is it normal for joint filler to separate?
On newer slabs, the concrete keeps shrinking after the joints are filled and a stiff filler can separate down one side. It is normally dealt with by topping up.
Is the floor joint work guaranteed?
Every job has our 12-month guarantee. It covers our workmanship, not later slab movement or damage from impacts.
Other services in Lownie Moor
Owners, agents and contractors
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Lownie Moor can sit alongside others in a wider programme across Angus.
Traffic, movement and joints around Lownie Moor
Being in the east of Scotland, Lownie Moor gets less rain than the west coast. Freezing weather and salt still attack open external joints. Autumn is a sensible time to seal them. The 3 miles around Lownie Moor take in at least three named trading estates, business parks or retail parks. Their warehouses, yards and car parks are exactly where joints take the most punishment.
Office parks like Restenneth Business Park (1.9 miles north of Lownie Moor) have decks, ramps and clad elevations whose joints take movement every day. For an estate such as Forfar Infirmary (1.6 miles north-west of Lownie Moor), the joints in ramps, decks and long building elevations all need attention over time.
Lownie Moor is about 2 miles south-east of Forfar, in Angus. We send applicators to Lownie Moor for floor joints. 65 places across Angus fall within our area, Lownie Moor among them. Dundee is covered too, around 12 miles from Lownie Moor.
We cover the DD8 postcode districts for floor joints. Just outside Lownie Moor, we also work in Kingsmuir (1 mile north), Hillend (1 mile east), Craichie (2 miles south-east), Forfar (2 miles north-west) and Lunanhead (2 miles north). Nearby towns on our patch include Arbroath (11 miles south-east), Monifieth (10 miles south), Carnoustie (10 miles south-east), Kirriemuir (7 miles north-west), Brechin (10 miles north-east) and Hunter's Town (10 miles south-east).
Around Lownie Moor
We work on buildings around Reid Park, among other places. A little further out are Forfar Castle (2 miles north-west) and Forfar Infirmary (1.6 miles north-west). For a walk, there’s Loch Fithie.
Our process
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before the next one starts. For work around Lownie Moor, we aim for one trip, so photos, sizes and a full list matter. External joints need a dry spell as well.
- First, the zones and order of work are agreed with you.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
What we need from you
- Share the asbestos register for older buildings
- Confirm the product named in the specification
- Tell us what induction or permit system the site runs
Get a fixed quote
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or ring 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Advice
Cost factors for floor joints
Your fixed quote is built from the real scope. It takes account of:
- How accessible the joints are
- Joint width, depth and condition
- Working within restricted access windows
- Distance, for remote addresses
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Sending details for a quote
There’s no need for a formal survey. These details are enough to start:
- Asbestos survey details if the building is older
- The type of building and who uses it
- Access details, including height
- Approximate linear metres or a joint schedule
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, phone 01277 525 020 or email the details over.
Why deal with it now?
Duct tape or a general builders’ sealant can seem to buy some time. Neither is made to carry wheels and traffic soon pulls it out. The right filler or sealant saves doing it twice. For buildings near Lownie Moor, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Why appoint us
- 12 months’ guarantee on every job
- One number for every site we cover
- Fully insured, including public liability cover
- Clear, fixed quotes
Take a look at what affects the cost or our accreditations.
Honest limits
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Wide or random cracking that suggests a structural issue
- Slab panels that rock or move under load
- Damaged or worn floor coatings and screeds
If in doubt, speak to us on 01277 525 020 or send photos by email and we’ll say what we think.
What we seal
- Retail and showroom floors
- Saw-cut induced joints
- Construction joints
- Forklift and pallet-truck routes
- Joints along racking aisles
- Loading bays
What we are called out for in Lownie Moor
Concrete slabs shrink as they dry out, and saw-cut joints give that shrinkage a planned place to crack. Each panel pulls back as it shrinks and the joints open up, and a filler placed early can part company with one face.
Typical triggers for a call:
- Loading bay joints breaking down
- Scruffy, dirty joint lines on a shop or showroom floor
- Unfilled floor joints collecting dirt and grit
- Filler that has parted from one face
Across sites such as Forfar Retail Park (2 miles north-west of Lownie Moor), floor and movement joints can be sealed in phases so units keep working.
What to look for in a quote
- Will RAMS and insurance details be available?
- Whether their applicators hold CSCS cards
- How long is the guarantee, and what does it include?
- How the joint faces will be prepared and primed