Industrial and floor joint sealing in Hillend, Angus
Need floor joint sealing in Hillend? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Cracked and crumbling joint fill
- Broken arrises where pallet trucks cross
- Joint fill separating from the concrete
Need floor joint sealing in Hillend?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing in Hillend: the local picture
At least three named trading, business or retail sites lie within about 3 miles of Hillend. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. Hillend is on Scotland’s drier eastern side. Cold winters and gritting are hard on any yard or deck joint left open. Sealing them before winter limits the damage.
Hospital campuses such as Forfar Infirmary, 2 miles to the north-west of Hillend, grow in stages, leaving movement joints wherever new blocks meet old. On a site such as Restenneth Business Park (2.1 miles north-west of Hillend), the movement joints are in car park slabs, paving and building elevations. Phasing is what makes joint work possible on busy sites such as Station Place Industrial Estate (2.3 miles north-west of Hillend): one bay, aisle or car park row at a time.
Hillend is about 2 miles south-east of Forfar, in Angus. Any commercial site in Hillend is covered. Hillend is one of 65 places in Angus on our list. Our Dundee page has more on work in that area, about 12 miles away.
Commercial sites across DD8 are covered. Close to Hillend, our area also takes in Lownie Moor (1 mile west), Kingsmuir (1 mile north-west), Craichie (1 mile south-east), Lunanhead (2 miles north) and Forfar (2 miles north-west). Bigger towns within reach include Arbroath (10 miles south-east), Montrose (15 miles north-east), Monifieth (10 miles south), Carnoustie (10 miles south-east), Kirriemuir (7 miles north-west) and Brechin (10 miles north-east).
What’s near Hillend
Other landmarks nearby include Meffan Museum and Art Gallery (2.3 miles north-west) and Forfar Castle (2.4 miles north-west). For a walk, there’s Loch Fithie.
Floor joint sealing in Hillend, done properly
Concrete floors in warehouses and factories are cut into bays by saw-cut joints and construction joints, and each joint line is a weak edge that wheels run over all day. Our job is to put the right filler or sealant into them for the loads and the movement they see so the edges are held up and debris can’t pack in. We work on saw-cut induced joints, joints along racking aisles and construction joints, and the failures we’re asked to look at most are scruffy, dirty joint lines on a shop or showroom floor and joint fill separating from the concrete. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Hillend, that means joint design, primers and backing rod as standard.
Weather windows decide external joint work around a place like Hillend: dry faces and the right temperature are essential, so dates have some give. Inside slabs aren’t affected and can be scheduled around the occupier.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Hillend (DD8)
- Wider area
- Angus
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Other services in Hillend
Quoting for work in Hillend
Quotes vary with the job. Expect it to depend on:
- Specialist products, such as fire-rated or hygienic sealants
- The total length or number of joints
- The size and state of each joint
- Working within restricted access windows
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a quote once you have the details.
What to include in your enquiry
A few photographs plus some basic facts will normally do. Please tell us:
- Drawings or a marked-up plan, if available
- Access details, including height
- A wide shot and a close-up of the area
- Asbestos survey details if the building is older
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Should maintenance staff do it?
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Keeping the joints sound
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Keep trucks off new joints until we say they’re ready
- Walk the main routes and inspect joint lines on a regular cycle
- Let us know what the floor is cleaned with
- Plan for a top-up on newer floors
Young concrete carries on shrinking, so some fillers part slightly from one face. It is a known trait of new floors and a later top-up deals with it.
While the concrete edges are intact, it’s a filling job. Once they have broken away, edge repair comes first, with more downtime and more disruption.
Work for main contractors and building owners
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Hillend. Several sites can go on one quote, which keeps the paperwork simple.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Different surfaces, different methods
Isolation joints at walls and columns
We plan column and wall joints around racking and fixed plant so nothing has to move unexpectedly.
Forklift and pallet-truck routes
Trucks running over open joints wear wheels and shake loads. Filling them gives a smoother run and protects the floor.
Questions about Hillend
Can you take on a job at a hospital such as Forfar Infirmary?
Yes, hospitals are one of the sectors we cover. Work is phased so departments keep running, under the site’s own rules.
Can you work at a site such as Restenneth Business Park, by Hillend?
Yes. Our area takes in Hillend and its surroundings, with estates and business parks such as Restenneth Business Park included. To start, just call the office on 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Do you repair broken joint edges?
Filling against broken edges doesn’t last. We will tell you if the joint edges need repairing first and set out how that affects the job.
Can the warehouse stay open while you work?
In the majority of cases, just the area being treated is coned off. Each zone reopens when the product can take traffic, then we move to the next.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Why has the filler pulled away from one side?
Separation usually comes from slab shrinkage, poor preparation or the wrong product. We diagnose the cause before suggesting a fix.
Which is better for warehouse joints, filler or sealant?
We decide joint by joint. Hard wheels need edge support, which points to a semi-rigid filler and perimeter or movement joints need flexibility. You’ll see the choice for each area in the quote.
Diagnose, treat, sign off
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes a day or more, depending on the metres of joint and how many zones the floor is split into. For a building near Hillend, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- First, the zones and order of work are agreed with you.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
Getting the site ready
- Point out any areas we must not close
- Arrange parking or a loading space
- Send asbestos survey details if the building is pre-2000
Get a fixed quote
For a fixed quote, ring 01277 525 020 or email the details over with the site address and an outline of the work. Our quote form is another easy route.