Angus · Scotland
Commercial sealant contractors in DD8
We cover every part of the DD8 postcode district, including Forfar, Kirriemuir and Letham. Failed sealant is always cut out completely, with a 12-month guarantee.
Mastic and sealant across DD8
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Areas within DD8
- Forfar
- Kirriemuir
- Letham
- Glamis
- Westmuir
- Lunanhead
- Kingsmuir
- Maryton
- Tannadice
- Hillend
- Noranside
- Padanaram
- Aberlemno
- Airlie
- Craichie
- Douglastown
- Inverarity
- Lownie Moor
- Tulloes
Our services across DD8
- Coloured and colour-matched sealant
- Commercial washroom and wet-area sealing
- Fire-rated sealing and fire stopping
- Facade and window perimeter sealing
- Mastic sealing for building owners and managing agents
- Industrial and floor joint sealing
- Expansion and movement joint sealing
- Construction and new-build mastic
- Commercial sealant contractors
- All services
Let us know the job and your postcode and we’ll come back with a price: give us a call on 01277 525 020 or send details through our quote form.
Postcodes nearby
Elsewhere in Angus
Every town in Angus
Every area we cover
Commercial sealant contractors across DD8: what to expect
A reseal stands or falls on the preparation underneath it. Old silicone gives new sealant nothing to grip, so every trace of it is removed and the faces are cleaned until they’re sound and dry, with no dust or grease left. Primer is used wherever the manufacturer calls for it on that surface. We work on external facade joints, kitchen worktops and splashbacks and floor and threshold joints, and the usual reasons a site gets in touch are leaks that seem to come through a sealant line and wall and floor joints that have lost their seal.
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes part of a day on a small job and longer where several buildings or phases are involved, and we clear our waste as we work.
- We begin with whatever information you have, whether that’s photos, a drawing or a list of locations, or we arrange a site visit.
- We work out why the joints have failed and fix a quote for the agreed scope.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- The depth is set, primer is used where the maker calls for it, and the fresh bead is applied and tooled.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
What you will pay
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why clients in DD8 choose us
- Coloured sealants to suit the setting, where available
- Public liability insurance in place
- Constructionline member
- One number for every site we cover
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
What’s near Forfar
We work on buildings around Forfar Academy, Guthrie Park and 23 Osnaburg Street pub, among other places. A little further out are Forfar Castle (under half a mile north-west) and Meffan Museum and Art Gallery (less than half a mile south-west). The countryside around Forfar includes Loch of Forfar.
Commercial premises across DD8
Commercial buildings across DD8 range from older premises altered many times to recent units on business parks. Surfaces decide the sealant, from masonry to powder-coated frames and shop-fit panels.
Across DD8, outside sealant work is planned around the weather, with a little give in the programme for wet or frosty days.
Forfar: In hotels such as Royal Hotel, less than half a mile to the west of Forfar, refurbishments normally mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes. If you have premises on more than one site, say at Forfar Retail Park and The Old Mart Business Park, one contractor and one quote can cover both.
When to bring in a specialist
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
When something else is needed
Before quoting, we check that sealant is the right answer. It won’t put right:
- Roof leaks that only look like a joint problem
- Faulty windows rather than failed perimeter sealant
- Cracking that needs a structural engineer to look at it
Looking after the joints
A few simple habits keep the new joints working:
- Keep abrasive pads and scrapers off resealed joints
- Act on the first lifting edges rather than waiting
- Look at the sealant around anything that has been moved or replaced
- Make sure contractors see the asbestos survey before cutting out old mastic
Our workmanship on each job is backed by a 12-month guarantee. Keep the handover details with your O&M or maintenance records, and tell us if a joint we sealed gives trouble within that time.
Sealant rarely fails all at once across a building. A few splits this year typically mean more next year. We can assess the lot and suggest what to do now and later.
Different surfaces, different methods
Commercial kitchens and tea points
In kitchens, sealant lines at worktops, sinks and wall panels take heat, grease and daily cleaning. They’re degreased thoroughly before resealing, with a food-safe or hygienic product wherever food contact can happen.
Facade and cladding joints
Panel joints on cladding and rendered facades open and close with the temperature. The product has to suit the movement, and the depth has to be controlled with backing. Access, such as scaffold already up, is agreed before the price is fixed.
Work for main contractors and building owners
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Building owners and managing agents use us on everything from one building to a spread of sites around DD8. Several sites can go on one quote, so there’s one set of paperwork to deal with.
FAQs: DD8
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Do you work in DD8?
Yes. We take on work across DD8, with one number for every area we cover.
Do you work directly for building managers?
Yes. A large share of our work comes through facilities managers, managing agents and landlords as well as contractors. We can work to your instruction process and site rules.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
How many days will you need on site?
That varies with the scale of the job, but the work typically takes a few hours to several days on most single sites, depending on joint lengths and access. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Do you take on multi-site sealant work?
Yes. We take on runs of jobs across portfolios as well as single sites, priced site by site or as one programme.