Coloured and colour-matched sealant in Lownie Moor, Angus
Coloured and colour-matched sealant for visible joints in Lownie Moor and across Angus. CHAS accredited and fully insured, with a 12-month guarantee.
- Standard-colour sealant spoiling a high-end finish
- Smeared sealant on stone or joinery
- Old sealant that has yellowed, darkened or faded
Coloured sealant for Lownie Moor sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant in Lownie Moor
Coloured sealant is a finishing trade, so it typically comes late in a programme. Adjacent finishes are masked and protected while we work, and snag any marks before we leave. Our workmanship carries a 12-month guarantee. The enquiries we see most involve fit-outs with a sealant colour in the specification and marked sealant in hotel bathrooms, across natural stone and brick, powder-coated and anodised frames and office fit-out finishes. Most enquiries from Lownie Moor start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a job around Lownie Moor, the Scottish weather is part of the planning: sealant needs a dry joint and the right temperature, so external work has a weather window built in. Internal joints can be done whatever the day brings.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Lownie Moor (DD8)
- Region
- Angus
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Our process
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact. Tell us who will meet us and how to get in at your building near Lownie Moor. We will confirm the plan with the fixed quote.
- First we agree which sealant type the joint needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- Masking comes off and the work is checked with you.
Preparing the site
- Tell us which areas need to stay in use
- Flag any permit to work we’ll need
- Let building users know which areas are affected
Getting a fixed quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or email us.
Advice
For managing agents and facilities managers
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
What we’re called out for in Lownie Moor
On some projects the colour was never agreed, or a substitute product was used. It seals fine but catches the eye.
It’s worth sending us details if you spot any of the following:
- Standard-colour sealant spoiling a high-end finish
- Coloured joints that have cracked with movement
- Untidy coloured beads with ragged edges
- Shop fits that need consistent sealant colours across sites
Occupiers with premises at both Restenneth Business Park and Forfar Retail Park could have the sealant at each handled under one quote.
Comparing quotes
- Their pre-qualification and accreditations
- Proof of insurance
- Whether primer will be used where the manufacturer specifies it
- Is the sealant right for the movement and the substrate?
Looking after the joints
To get the most from the new sealant:
- Approve a sample bead on high-profile areas
- Clean coloured joints with mild products
- Record the product and colour reference on the building file
- Settle the colour with the designer at the start
If other trades disturb a coloured joint, ask them to tell you rather than patch it. Wrong-colour patches are obvious, undoing the look you paid for.
Share the colour reference with anyone working on the finishes. It stops mismatched repairs creeping in.
Also in Lownie Moor
Working on commercial sites near Lownie Moor
There are several hotels within about 2 miles of Lownie Moor. Refits in hotels bring joints at vanity tops, bar counters and reception desks where the colour has to suit the scheme. Being in the east of Scotland, Lownie Moor gets less rain than the west coast. Frost and condensation on winter mornings can still hold up external sealing. In winter, outside joints are timed for when surfaces are dry and within the product’s range
For tenants and agents on sites such as Restenneth Business Park (1.9 miles north of Lownie Moor), office fit-outs, reception joints and window perimeters are the usual sealant work.
Lownie Moor is about 2 miles south-east of Forfar, in Angus. If you’re looking for coloured sealant in Lownie Moor, we can help. Across Angus, 65 places are covered, including Lownie Moor. For work in that direction, see our Dundee page, about 12 miles away.
Anyone looking for coloured sealant in DD8 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Sites close to Lownie Moor are covered too, including Kingsmuir (1 mile north), Hillend (1 mile east), Craichie (2 miles south-east), Forfar (2 miles north-west) and Lunanhead (2 miles north). Further afield, our area takes in Arbroath (11 miles south-east), Monifieth (10 miles south), Carnoustie (10 miles south-east), Kirriemuir (7 miles north-west), Brechin (10 miles north-east) and Hunter's Town (10 miles south-east).
Around Lownie Moor
Locally, jobs take us to sites close to Reid Park, among other places. A little further out are Forfar Castle (2 miles north-west) and Forfar Infirmary (1.6 miles north-west). Not far away are Loch Fithie.
When it isn’t the sealant
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Paintable products in joints they aren’t suited to
- Exact bespoke colour matches beyond the product’s range
- Colour variation across natural stone or brick that no single shade can match
Not sure which it is? You can call 01277 525 020 or send photos by email and we will tell you honestly.
What we seal
- Shop-fit joinery and counters
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Office fit-out finishes
- Natural stone and brick
- Cladding panels
Common questions from Lownie Moor clients
Does a hotel in Lownie Moor need to shut while its sealant is renewed?
Almost never. The work is phased so most rooms stay available. We agree the order of rooms and the timings with you before we start.
Do you cover business parks and estates near Lownie Moor, such as Restenneth Business Park?
Yes. We cover Lownie Moor and the area around it, including industrial estates, business parks and retail parks such as Restenneth Business Park. Photos and a short description are enough for a first look.
How do I request a quote?
The quote form is the simplest route, though you can also phone 01277 525 020 or send details through our quote form. Include photos or drawings if you have them.
How many days will you need on site?
It depends on the scope, though a typical visit typically takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first. For bigger or phased jobs, we’ll set out a timescale with the quote.
Can we approve the colour on site?
Yes. We can fit a sample into the programme so sign-off doesn’t hold up the work.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Will you just go over the old sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
General trades versus a specialist
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.