Lochinver floor joint sealing
Planning work on a floor joint in Lochinver? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Chipped and spalling edges along forklift routes
- Open saw cuts full of debris
- Brittle joint filler breaking up
Floor joint sealing for businesses in Lochinver
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floor joint sealing in Lochinver, done properly
Concrete floors in warehouses and factories are cut into bays with saw cuts and day joints, and each joint line is a weak edge that wheels run over all day. Our job is to put the right filler or sealant into them for the loads and the movement they see, so the arrises are supported and grit stays out. We work on joints along racking aisles, forklift and pallet-truck routes and loading bays, and the failures we’re asked to look at most are broken arrises where pallet trucks cross and joint fill separating from the concrete. Searching for sealant specialists in Lochinver? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
Weather windows decide external joint work around a place like Lochinver: dry faces and the right temperature are essential. Inside slabs aren’t affected and can be scheduled around the occupier.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Lochinver (IV27)
- Wider area
- Highland
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Signs you need floor joint sealing in Lochinver
Older fills harden, shrink and crack with age, particularly where cleaning machines and traffic work it daily. At that point it neither holds the edges nor keeps debris out.
If one of these sounds familiar, it’s time for a closer look:
- Trucks and loads jolting over damaged joints
- Untidy open joints in a retail unit
- Open saw cuts full of debris
- Old filler gone hard, cracked or loose
In and around Lochinver, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Questions to ask before you book
- Are they CHAS accredited or on Constructionline?
- Proof of insurance
- What site paperwork they can supply
- Who will actually carry out the work
Should maintenance staff do it?
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Nearby places to Lochinver
What else we do in Lochinver
Cost factors for floor joints
A fixed quote reflects the actual work. It takes account of:
- Removal of failed or old sealant
- The total length or number of joints
- The product specified
- Any access equipment needed
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What we need to price the job
Diagnosis starts before we arrive. Let us know:
- Asbestos survey details if the building is older
- The type of building and who uses it
- Drawings or a marked-up plan, if available
- Any dates the work must fit around
For a fixed quote, call the office on 01277 525 020 or send photos by email with the site address and an outline of the work. You can also send details through our quote form.
Commercial clients in Lochinver
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
We work for building owners and managing agents on everything from one building to a spread of sites around Lochinver. One quote can cover more than one site, which keeps the paperwork simple.
How a job runs
Diagnose, treat, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. For a building near Lochinver, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- First, the zones and order of work are agreed with you.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- We fill the joints with the agreed product, finished level.
- You get a time for each zone to reopen.
Preparing the site
- Agree which areas must stay open
- Share the asbestos register for older buildings
- Move anything stored against the joints
Request a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Advice
Joints that move: notes for Lochinver
With the shore within about 1 mile, Lochinver counts as a coastal location. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so it pays to keep them sealed. The west of Scotland, where Lochinver is, gets more rain than the east. External slab joints left open take plenty of rain. Dry spells are used for the external joints.
Around Lochinver, open joints collect water and debris, and the arrises are the next to go.
Lochinver (Gaelic: Loch an Inbhir) is in Highland. Lochinver sits inside our coverage and the rest of Highland, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Highland, 256 places are covered, including Lochinver.
Work on floor joints is covered throughout IV27. Streets here include Inver Terrace, Kirk Road and Inver Park, and sites on any of them can send details for a fixed quote. Sites close to Lochinver are covered too, including Stoer (5 miles north-west), Stor (5 miles north-west), An Druim Beag (6 miles north), Achiltibuie (10 miles south) and Scourie More (13 miles north). For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
What’s near Lochinver
The countryside around Lochinver includes Loch an Ordain.
Your questions answered
Does the sea air around Lochinver change the choice of sealant?
It can. Coastal exposure works external joints harder than inland weather. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Do we have to stop operations in Lochinver while the joints are sealed?
Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we’ll plan from there.
How long before trucks can use the joints?
Each product has its own cure time and cooler floors take longer. We plan the phasing so that waiting time fits your operation.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Do you offer coloured sealant?
That depends on the product. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
How long does a job like this take?
It depends on the scope, though a typical visit typically takes anything from a day for one loading bay to several days for a large floor, split into phases. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
What sealant work can’t fix
We check first that sealant really is the fix. It isn’t the answer for:
- Level or flatness problems across the floor
- Joint edges that have already broken away, which need repairing before filling (we’ll tell you if so)
- A failing floor coating, which is a flooring contractor’s job
If in doubt, ring 01277 525 020 or email a schedule or drawings and we will say what we think.
What we seal
- Retail and showroom floors
- Joints along racking aisles
- Saw-cut induced joints
- Construction joints
- Forklift and pallet-truck routes
- Loading bays