Floor Joint Sealing in An Druim Beag
We carry out floor joint sealing and filling in warehouses, factories and industrial units in An Druim Beag. Send photographs or drawings for a fixed quote.
- Saw-cut joints left open and packed with grit
- A gap opening alongside old joint filler
- Chipped and spalling edges along forklift routes
Need floor joint sealing in An Druim Beag?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Owners, agents and contractors
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. An Druim Beag can form part of a wider programme.
Floor joint sealing for commercial buildings in An Druim Beag
Few warehouses can shut a whole floor while joints are done, so the work is split into zones and treated one area at a time. Share your site hours and access windows and the programme is built around them, with goods still moving in the areas we aren’t in. We work on construction joints, forklift and pallet-truck routes and loading bays, and the usual reasons a site gets in touch are a rough ride across broken joints and grimy joint lines spoiling a showroom floor. Looking for mastic applicators who cover An Druim Beag? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Weather windows decide external joint work around a place like An Druim Beag: sealant needs a dry joint and a temperature within its range. Internal floors can be done whenever suits the site.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Place
- An Druim Beag (IV27)
- Region
- Highland
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
How the quote is worked out
We price every job individually. The main factors are:
- Any access equipment needed
- Travel to remote or island sites
- How much existing material needs removing
- Phasing around occupants
We don’t publish prices, since every building and every scope is different. Call for a quote and we will price your job on its own details.
Details that help us quote
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Any specification or named product
- Drawings or a marked-up plan, if available
- The postcode of the building
- A wide shot and a close-up of the area
For a fixed quote, call the office on 01277 525 020 or email drawings and photos. Our quote form is another easy route.
Why deal with it now?
While the arrises are intact, filling a joint is straightforward. Wait until the edges have spalled and the concrete needs repairing before the joint can be filled, with longer closures to match. Around smaller places like An Druim Beag, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Why choose Mastic Doctor in An Druim Beag
- Over 20 years of commercial sealing
- One contact handling all your sites
- 12 months’ guarantee on every job
- Fully insured
Read how commercial sealant jobs are priced and our accreditations.
How the job changes by surface
Forklift and pallet-truck routes
A route joint has to take repeated wheel strikes without breaking up. Wheel type and traffic level steer the product choice.
Semi-rigid joint fillers
On industrial routes, a semi-rigid filler is often the right choice. They are installed to the depth the manufacturer specifies and finished flush.
Floor joint sealing in An Druim Beag: the local picture
An Druim Beag lies within about 2 miles of the sea. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so a failed joint lets more in and the edges break up sooner. An Druim Beag is on Scotland’s wetter western side. Rainwater through open yard and deck joints is a bigger issue here than in the drier east. Dry spells are used for the external joints.
Once a joint near An Druim Beag opens up, grit and water get in and the edges start to break. For floors and slabs around An Druim Beag, the product is chosen for the traffic and the movement at each joint.
An Druim Beag (Gaelic: Drumbeg) is in Highland. Businesses, contractors and managing agents in An Druim Beag use us for work on floor joints. An Druim Beag is one of 256 places in Highland on our list.
Commercial sites across IV27 are covered for floor joints. We also cover Stor (5 miles south-west), Stoer (6 miles south-west), Lochinver (6 miles south), Scourie More (7 miles north) and Scourie (8 miles north) for floor joints. Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you ring 01277 525 020 or email drawings and photos.
What’s near An Druim Beag
Open spaces near An Druim Beag include Loch Torr nan Uidhean and Gorm Chnoc.
Questions about An Druim Beag
Can being near the sea in An Druim Beag affect the sealant we need?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Does a site in An Druim Beag have to shut while its joints are sealed?
Typically not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Is the floor joint work guaranteed?
There is a 12-month guarantee on our workmanship, and we hold public liability insurance.
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
How do we get a quote for floor joints?
Use our quote form, or email photos and a plan and tell us what runs on the floor. A fixed quote follows that shows the products and zones.
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes a day for smaller units, with bigger warehouse floors programmed over several visits, and our waste is bagged and taken away as we go. For a building near An Druim Beag, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We look at joint widths, edge condition and the traffic on each route.
- You get a fixed quote with the product and the phasing set out.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- We vacuum each run and prime it if the chosen product requires a primer.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- The area is handed back once it has cured enough to take traffic.
Before we start on site
- Send asbestos survey details if the building is pre-2000
- Tell us what induction or permit system the site runs
- Have the specification and drawings to hand
Quotes
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or ring 01277 525 020 or email us to discuss it first.
Related advice
Places near An Druim Beag
Other services in An Druim Beag
Looking after the joints
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Allow for topping up joints as a new slab settles
- Stop forks and pallets being dragged across joints
- Respect the cure time before traffic returns
- Keep grit out of unfilled joints in the meantime
A routine walk of the busiest aisles shows how the joints are holding up. Look for separation down one side, new chips in the arris and debris gathering and keep photographs so changes are easy to compare.
While the concrete edges are intact, it’s a filling job. After the edges go, repairs come into it and that takes longer and closes areas for longer.